Er zijn 100 producten gevonden die overeenkomen met uw zoekopdracht voor mosconi in 5 winkels:

The Mosconi PICO 4 s.a. is a 4-Channel Amplifier from Gladen as a full-range PWM amplifier. Bridgeable and stable at 2 Ohms with a total power of up to 480 Watts RMS. Active crossover, crossover for semi-active operation (Pico 4 SA) and individual filters on channels 1+2 and 3+4. High-level and low-level input, auto-on (only high level) off – BTL. Compact design with dimensions of 150 x 115 x 46 mm and 1050 grams. Molex connectors and efficiency overall > 75%. Available as a 24 Volt version (only Pico 4). Features 4-Channel Amplifier Full-range PWM amplifier Bridgeable Stable at 2 Ohms Total power of up to 480 Watts RMS Active crossover Crossover for semi-active operation (Pico 4 SA) High-level input Low-level input Molex connectors Compact design High current efficiency Individual filters on channels 1+2 and 3+4 Available as a 24 Volt version (only Pico 4) Technical Data Output power at 4 Ohms: 4 x 90 Watts Output power at 2 Ohms: 4 x 120 Watts Output power at 4 Ohms: 2 x 85 Watts + 1 x 230 Watts (bridged) Output power at 4 Ohms: 2 x 230 Watts (bridged) Input voltage: 0.3 – 20 V Efficiency overall: > 75% Auto-On (only high level): Off – BTL Channel 1+2 filter (HP): Off – 80 Hz (12 dB/Oct) Channel 3+4 filter (HP/LP): Off – 80 Hz (12 dB/Oct) Channel 1+2 filter (HP): Off – 280 Hz (12 dB/Oct) – Pico 4 SA Channel 3+4 filter (HP/LP): Off – 220 Hz (12 dB/Oct) – Pico 4 SA Dimensions: 150 x 115 x 46 mm Weight: 1050 grams

Discover the Mosconi Pro 1 10 evo, a 1-Channel Amplifier from Gladen that impresses with its high power and clear audio transmission. With up to 3,000 Watts RMS at 1 Ohm, it offers impressive power reserves and precise control over the speaker. Thanks to the efficient Class-D technology, it is ideal for Subwoofer and Midwoofer applications, especially in limited space. The separate signal and power architecture ensures stable and unaltered signal transmission. Adjustable input sensitivity and an optimized DirectDSP input complete the special features of this amplifier. Ultimate power. Maximum control. The MOSCONI PRO 1 10 EVO is a powerful mono amplifier designed for use in demanding car audio systems. With up to 3,000 Watts RMS at 1 Ohm, it offers high power reserves while maintaining precise control over the speaker. Thanks to the combination of efficient Class-D technology and optimized signal architecture, the PRO 1 10 EVO is suitable for both Subwoofer applications and powerful Midwoofer systems. High power density in a compact design. The Class-D amplifier allows for high output power while requiring minimal space and generating low heat. Thus, the PRO 1 10 EVO is particularly suitable for installation situations with limited space. Separate signal and power paths for detailed control. The internal architecture of the PRO 1 10 EVO consistently separates the signal path from the power supply. While the power supply processes high currents and dynamic load changes, the audio signal path remains completely decoupled from it. This separation occurs not only conceptually but also at the layout level through clearly defined signal paths and separate ground areas. The result is a significantly reduced influence from Power spikes in the power supply, Load feedback on the supply, Electromagnetic interference within the amplifier. Especially at high power levels and complex loads, the signal remains stable and unaltered. Especially at high power levels and complex loads, the signal remains stable and unaltered. Precise signal adjustment without potentiometers. The input sensitivity can be adjusted channel-separated via dip switches. This allows for reproducible and durable settings without mechanical wear parts. The adjustment is made in 0.25-volt steps in the range of 1 to 8.75 volts. Optimized DirectDSP input The integrated DirectDSP input allows for direct connection to external DSP systems. Since additional signal processing in the amplifier is omitted, the audio signal remains unchanged and low-loss. This is particularly relevant for fully DSP-based systems. Stable power output under real conditions A microprocessor-controlled power supply ensures stable output power, even with voltage fluctuations in the vehicle. An internal system additionally monitors temperature and operating status and actively controls cooling. Technical highlights Class-D mono amplifier up to 3,000 Watts RMS @ 1 Ohm high damping factor (>1000) for precise speaker control...

The Mosconi ONE 1 1000 is a 1-Channel Amplifier from Gladen with an output power of 1 x 600 Watts at 4 Ohms and 1 x 1000 Watts at 2 Ohms. The input sensitivity ranges from 0.35 V to 15 V. The phase shift is adjustable from 0° to 360°. Low Level and High Level inputs can be selected via a switch, and a Low-Level output is also available. Auto Sense is active in High Level mode. A remote volume control is optional. A 24 Volt version for truck operation is available. Protection is provided by 4 x 30 A fuses. Dimensions: 290 x 210 x 55 mm. Features 1-Channel Amplifier Remote volume control (optional RTC2) Phase shift: 0° to 360° (always in line) Low Level / High Level input mode (via switch) Auto Sense (only in High Level mode) Low-Level output 24 Volt version for truck operation available Technical Specifications Output power at 4 Ohms: 1 x 600 Watts Output power at 2 Ohms: 1 x 1000 Watts Input sensitivity: 0.35 V to 15 V Fuses: 4 x 30 A Dimensions: 290 x 210 x 55 mm Remote Control: RTC (optional)

The Mosconi ONE 8 10 DSP is an 8-Channel DSP Amplifier from Gladen with a new design and analog amplifier technology. It integrates a 10-Channel DSP and features bridgeable speaker outputs. The power specifications include 8 x 90 Watts at 4 Ohms, 8 x 120 Watts at 2 Ohms, and 4 x 240 Watts at 4 Ohms in bridged mode; additionally, 4 x 85 Watts and 2 x 250 Watts BTL at 4 Ohms. A Molex speaker connection allows for clean wiring and is compatible with all Plug&Play cable sets from the SoundUp program. Auto On (High Level) is integrated. Additional specifications: input sensitivity 0.35 V to 15 V, analog DSP outputs with 2 x 2 Vrms, optical digital input (Toslink), RTC remote control (optional), fuses 2 x 40 A, and dimensions 290 x 210 x 55 mm. Features 8-Channel DSP Amplifier New design Analog amplifier technology 10-Channel DSP Bridgeable speaker outputs Molex speaker connection Compatible with all Plug&Play cable sets from the SoundUp program Auto On (High Level) Technical Specifications Output power at 4 Ohms: 8 x 90 Watts Output power at 2 Ohms: 8 x 120 Watts Bridged power at 4 Ohms: 4 x 240 Watts Output power at 4 Ohms: 4 x 85 Watts BTL output power at 4 Ohms: 2 x 250 Watts Input sensitivity: 0.35 V - 15 V Fuses: 2 x 40 A Analog DSP output: 2 x 2 Vrms Digital input: Optical (Toslink) Remote control: RTC (optional) Dimensions: 290 x 210 x 55 mm

The Mosconi ONE 1 1000 is a 1-Channel Amplifier from Gladen with an output power of 1 x 600 Watts at 4 Ohms and 1 x 1000 Watts at 2 Ohms. The input sensitivity ranges from 0.35 V to 15 V. The phase shift is adjustable from 0° to 360°. Low Level and High Level inputs can be selected via a switch, and a Low-Level output is also available. Auto Sense is active in High Level mode. A remote volume control is optional. A 24 Volt version for truck operation is available. Protection is provided by 4 x 30 A fuses. Dimensions: 290 x 210 x 55 mm. Features 1-Channel Amplifier Remote volume control (optional RTC2) Phase shift: 0° to 360° (always in line) Low Level / High Level input mode (via switch) Auto Sense (only in High Level mode) Low-Level output 24 Volt version for truck operation available Technical Specifications Output power at 4 Ohms: 1 x 600 Watts Output power at 2 Ohms: 1 x 1000 Watts Input sensitivity: 0.35 V to 15 V Fuses: 4 x 30 A Dimensions: 290 x 210 x 55 mm Remote Control: RTC (optional)

The Mosconi ONE 4 130 is a 4-Channel Amplifier from Gladen with Class-AB technology and analog Full Mosfet technology. It can be used as a dual stereo amplifier. The features include Remote Volume Control (optional), a G-HOC slot, and a switchable Low Level / High Level input mode. Auto Sense is active in High Level mode. A 24 Volt version for truck operation is available. The output power is 4 x 130 Watts at 4 Ohms, 4 x 175 Watts at 2 Ohms; bridged at 4 Ohms 2 x 350 Watts. The input sensitivity ranges from 0.35 V to 16 V. The Crossover operates from 20 to 225 Hz with High Pass, Low Pass, or OFF modes. The dimensions are 310 x 200 x 50 mm, and the weight is 2.6 kg. Features 4-Channel Amplifier Class-AB technology Analog Full Mosfet technology Dual stereo amplifier Remote Volume Control (optional) G-HOC slot Low Level / High Level input mode (switchable) Auto Sense (only in High Level mode) 24 Volt version for truck operation available Technical Specifications Output power at 4 Ohms: 4 x 130 Watts Output power at 2 Ohms: 4 x 175 Watts Bridged power at 4 Ohms: 2 x 350 Watts Input sensitivity: 0.35 V – 16 V Crossover: 20 – 225 Hz / High Pass – Low Pass – OFF Dimensions: 310 x 200 x 50 mm Weight: 2.6 kg

The Mosconi HLA-SLIM is a High-Low Adapter from Gladen with a slim design without a plastic housing and plug. It features a very compact form factor. The maximum permissible rated load is 50 W x CH, and the remote output can handle up to 100 mA. The standby power consumption is under 0.8 mA, and the operating current draw is under 15 mA (under 30 mA in the dual version), and it also has protection against polarity reversal. The remote out delivers over 12 V at Irem-out under 100 mA, has short-circuit protection, and a maximum short-circuit duration of under 10 s. Technical specifications include total harmonic distortion under 0.01%, rise time of 10 V/µs, S/N over 100 dB, channel separation over 60 dB, common-mode noise rejection over 60 dB, and down-conversion of 4:1 V/V. The high-level input ballast impedance is 45 Ohm/2 W per channel, the maximum continuous power is 25 W RMS x CH at 4 Ohm, the maximum output signal is 3.2 Vrms at THD under 0.1%, and the minimum output load impedance is 2 kOhm. Made in Italy. Features High-Low Adapter Slim design without plastic housing and plug Very compact form factor Maximum permissible rated load 50 W x CH Remote output can handle up to 100 mA Made in Italy Technical Data Standby power consumption 12 V at Irem-out 100 dB Channel separation > 60 dB Common-mode noise rejection > 60 dB Down-conversion ratio 4:1 V/V High-level input ballast impedance 45 Ohm / 2 W per channel Maximum continuous power (sine) at 4 Ohm 25 W RMS x CH Maximum permissible rated load of the head unit 50 W x CH Maximum output signal at THD < 0.1 % 3.2 Vrms Minimum output load impedance 2 kOhm Minimum permissible load at remote out 120 Ohm Remote out maximum current output 100 mA (normal operation)

The Mosconi PRO 2 30 is a 2-Channel Amplifier from Gladen featuring MOSCONI Class D technology. DDSP - Direct DSP (bypassing all preamplifier circuits), selectable High Level / Low Level input, Autosense (only in BTL mode), and RTC for volume control via optional remote control are integrated. The Power Supply and temperature management are controlled by a microprocessor. Output power at 4 Ohms: 2 x 550 Watts. Output power at 2 Ohms: 2 x 825 Watts. Bridged power at 4 Ohms: 1 x 1650 Watts. Bridged power at 2 Ohms: 1 x 2500 Watts. Input sensitivity 0.25 V - 8.3 V (4.3 V in DDSP mode). Crossovers: Low Pass 43 - 300 Hz (24 dB/Oct) and High Pass 18 - 220 Hz (24 dB/Oct). Dimensions 500 x 205 x 55 mm, weight 5.0 kg, housing in black/silver finish. Features 2-Channel Amplifier MOSCONI Class D technology DDSP - Direct DSP (bypassing all preamplifier circuits) Selectable High Level / Low Level input Autosense (only in BTL mode) RTC - Allows volume control via a remote control (optional) Power Supply and temperature management controlled by microprocessor Housing: black/silver finish Technical Specifications Output power at 4 Ohms: 2 x 550 Watts Output power at 2 Ohms: 2 x 825 Watts Bridged power at 4 Ohms: 1 x 1650 Watts Bridged power at 2 Ohms: 1 x 2500 Watts Input sensitivity: 0.25 V - 8.3 V (4.3 V in DDSP mode) Low Pass: 43 - 300 Hz (24 dB/Oct) High Pass: 18 - 220 Hz (24 dB/Oct) Dimensions: 500 x 205 x 55 mm Weight: 5.0 kg

The Mosconi DSP 6to8 PRO is an 8-Channel DSP from Gladen with 48 kHz / 24 Bit High Resolution audio. The 6 x RCA inputs can be switched between High and Low Level with Autosense, complemented by 1 x BT interface, compatible only with BTM. Two inputs can be freely selected as prioritized Auto-fade / Aux. The ATOM Mixer menu allows for dynamic preset switching and trigger control. Outputs include 8 x RCA analog as well as 12 V Remote-out with Autosense for High Level signal. The fully parametric 30 Band EQ is also graphically usable and offers a range of +12 to -12 dB with Q 0.5–40. Each channel has 5 freely configurable filters available, including High-pass, Low-pass, Shelf, Notch, Allpass, and Peak-EQ, with slopes of 6–120 dB/Octave, variable Q, time, and level. Features such as time correction 0–12 ms in 0.020 ms steps, input delay for channels 1–6, phase inversion 0–180°, output level adjustment in 0.5 dB steps, mute function, and 4 preset memories with seamless switching are integrated. Dimensions are 150 x 125 x 40 mm including mounting flange. Features 8-Channel DSP 48 kHz / 24 Bit High Resolution audio 6 x RCA inputs, switchable High / Low Level with Autosense 1 x BT interface, compatible only with BTM 2 inputs freely selectable as prioritized Auto-fade / Aux ATOM Mixer menu with dynamic preset switching and trigger control 8 x RCA analog outputs 12 V Remote-out, Autosense for High Level signal Fully parametric 30 Band EQ, also graphically usable 5 filters per channel freely configurable Filter types: High-pass, Low-pass, Shelf, Notch, Allpass, Peak-EQ Time correction 0–12 ms Input delay channels 1–6 Phase inversion 0–180° Output level adjustment in 0.5 dB steps Mute function Technical Specifications EQ range +12 to -12 dB EQ Q-factor 0.5–40 Slope 6–120 dB/Octave, variable Q, time, and level Time correction step size 0.020 ms Channel sorting: Front 1–4 Assignable channels: 5 + 6 = Front, Rear; 7 + 8 = Sub, Center, Free 4 x preset memories, seamless switching Dimensions 150 x 125 x 40 mm including mounting flange

The Mosconi Pro 4 10-AAB EVO from Gladen is a 4-Channel Amplifier designed for demanding car audio systems. With the innovative AAB technology, this amplifier ensures maximum sound precision and stable signal processing, even with temperature fluctuations and dynamic music signals. The separate signal and power paths guarantee clear sound reproduction without interference. With flexible applications, such as stereo operation or use in active multi-way systems, the amplifier offers high power and control over the speakers. Thanks to the optimized DirectDSP input, the audio signal remains unchanged and lossless. The compact design and unique aesthetics make the Mosconi Pro 4. 10-AAB EVO is a versatile addition to your car audio system. Analog reference. Developed for maximum sound precision. The MOSCONI PRO 4 10 AAB EVO is a 4-Channel Amplifier for demanding car audio systems, where sound quality and control are the focus. At the center is the AAB technology, an amplifier concept that fundamentally differs from classical Class-AB power amplifiers. Instead of a common control for all power transistors, the output stage operates with distributed control at the component level. The result is particularly stable and linear signal processing, even under real conditions such as temperature changes, load fluctuations, or dynamic music signals. AAB technology: Control at the component level. In classical amplifiers, the entire output stage is controlled via a common operating point. It is assumed that all power transistors operate identically, which is never fully the case in practice. The AAB technology takes a different approach. Each individual power transistor is monitored and controlled separately. Local control loops ensure that each component remains in the optimal operating range at all times – regardless of: Temperature, Current flow, Load behavior, Component tolerances. This results in a significantly more stable and uniform operation of the entire power amplifier. Stability instead of compromise. This distributed architecture reduces typical problems of classical amplifiers: Thermal drift, Unequal distribution between transistors, Unstable operating points, Dependence on component tolerances. Even at high power levels, complex speaker loads, and dynamic music signals, the power amplifier remains controlled and predictable. Separate signal and power paths form the clean basis for sound. The internal architecture consistently separates the sensitive audio signal path from the power supply. High currents and rapid load changes occur in the power supply. The signal path, on the other hand, operates with very low voltages and is sensitive to interference. By clearly separating layout and ground levels, it is prevented that these influences enter the audio signal. This specifically reduces Interference from current peaks, Feedback from the load on the supply, Internal interference within the power amplifier. The signal remains clean, stable, and...

Mosconi DSP 6to8 Aerospace is an 8-Channel DSP from Gladen with 96 kHz/24 Bit High-Resolution Audio. The inputs include 6 x RCA switchable High/Low Level with Autosense, 1 x optical S/PDIF, and 1 x digital COAX RCA; four of these can be freely selected as prioritized Auto-fade/Aux. Outputs are 8 x analog RCA, 1 x optical S/PDIF freely assignable and volume-controlled, as well as 12 V Remote-out. The signal processing includes a fully parametric 30-band EQ, also usable graphically, with +12 to -12 dB and Q 0.5–40, plus 10 freely configurable filters per channel with High-pass, Low-pass, Shelf, Notch, Allpass, and Peak-EQ, as well as slopes of 6–120 dB/Octave. Additional features include time correction 0–12 ms in 0.010 ms steps, input delay on channels 1–6, phase inversion 0–180°, output level adjustment in 0.5 dB steps, mute function, and 4 preset memory with switching without audio interruption. The ATOM Mixer menu includes dynamic preset switching and trigger control, the channel sorting includes fixed Front 1–4 and assignable channels 5 and 6 for Front/Rear and 7 and 8 for Sub/Center/Free. Dimensions are 150 x 125 x 40 mm including mounting flange. Features 8-Channel DSP 96 kHz / 24 Bit High-Resolution Audio 6 x RCA inputs, switchable High/Low Level with Autosense 1 x optical S/PDIF input 1 x digital COAX RCA input 4 freely selectable prioritized Auto-fade/Aux inputs ATOM Mixer menu with dynamic preset switching and trigger control 8 x analog RCA outputs 1 x optical S/PDIF output, freely assignable, volume-controlled 12 V Remote-out Fully parametric 30-band EQ, also usable graphically 10 freely configurable filters per channel Filter types: High-pass, Low-pass, Shelf, Notch, Allpass, Peak-EQ Channel sorting: Fixed Front 1–4; Channels 5 and 6 Front/Rear; Channels 7 and 8 Sub/Center/Free Mute function Technical Specifications Dimensions 150 x 125 x 40 mm (including mounting flange) EQ Gain +12 to -12 dB EQ Q-factor 0.5–40 Slope 6–120 dB/Octave, variable Q, time, and level Time correction 0–12 ms, steps 0.010 ms Input delay on channels 1–6 Phase inversion 0–180° Output level adjustment in 0.5 dB steps 4 preset memory, switching without audio interruption

The Mosconi MIC Measurement Microphone from Gladen is an optional microphone to complement the AMAS hands-free function. It is exclusively compatible with the Mosconi 6to8 DSP with optional SP-Dif Multi and AMAS module. Made in Germany. The connecting cable measures 5 m, consisting of a 3 m connecting cable at the microphone and a 2 m extension. Simultaneous hands-free speaking and A2DP music streaming is possible when both signals come from the same device; the hands-free signal takes priority. Features Measurement Microphone Optional microphone to complement the AMAS hands-free function Made in Germany Only compatible with Mosconi 6to8 DSP with optional SP-Dif Multi and AMAS module Simultaneous hands-free speaking and A2DP music streaming possible Technical Data Connecting cable: 5 m Connecting cable at the microphone: 3 m Extension: 2 m Prioritization: hands-free signal takes precedence Requirement for parallel operation: music streaming and hands-free speaking from the same device

The Mosconi Pro 4 30 AAB EVO, a 4-channel high-performance amplifier from Gladen, provides outstanding sound precision through its innovative AAB technology. This technology differs from classical amplifiers by enabling distributed control at the component level, leading to stable and linear signal processing. The amplifier also impresses with its ability to precisely adjust the input sensitivity via dip switches and its compatibility with DSP systems thanks to the optimized DirectDSP input. With robust performance that remains clean even under high loads and real conditions, the Mosconi Pro 4 30 AAB EVO offers both flexibility and control for demanding car audio systems. Analog reference. Designed for maximum sound precision. The MOSCONI PRO 4 30 AAB EVO is a 4-channel power amplifier for demanding car audio systems, where sound quality and control are the focus. At the center is the AAB technology, an amplifier concept that fundamentally differs from classical Class-AB power amplifiers. Instead of a common control for all power transistors, the output stage operates with distributed control at the component level. The result is particularly stable and linear signal processing, even under real conditions such as temperature changes, load fluctuations, or dynamic music signals. AAB technology: Control at the component level. In classical amplifiers, the entire output stage is controlled via a common operating point. It is assumed that all power transistors operate identically, which is never fully the case in practice. The AAB technology takes a different approach. Each individual power transistor is monitored and controlled separately. Local control loops ensure that each component remains in the optimal operating range at all times – regardless of: Temperature, Current flow, Load behavior, Component tolerances. This results in a significantly more stable and uniform operation of the entire power amplifier. Stability instead of compromise. This distributed architecture reduces typical problems of classical amplifiers: Thermal drift, Unequal distribution between transistors, Unstable operating points, Dependence on component tolerances. Even at high power levels, complex speaker loads, and dynamic music signals, the power amplifier remains controlled and predictable. Separate signal and power paths form the clean basis for sound. The internal architecture consistently separates the sensitive audio signal path from the power supply. High currents and rapid load changes occur in the power supply. The signal path operates with very low voltages and is sensitive to interference. By clearly separating layout and ground levels, it is prevented that these influences enter the audio signal. This specifically reduces Interference from current peaks, Feedback from the load on the supply, Internal interference within the power amplifier. The signal remains clean, stable, and uncolored even at high power. Thus, the signal remains clean, stable, and uncolored...

The Mosconi RTC-HUB-IR from Gladen is DSP Accessories for adaptation to the MOSCONI DSP-RCD connection. It serves as an interface for analog controllers such as RTC and MOS_SWITCH. Applicable for MOSCONI DSP products with RCD connection. Not necessary for DSP 4to6, 4to6 DIF, and ONE 120.4 DSP. Features DSP Accessories Interface for analog controllers such as RTC and MOS_SWITCH Adaptation to the MOSCONI DSP-RCD connection Compatible with MOSCONI DSP products with RCD connection Not necessary for DSP 4to6, 4to6 DIF, and ONE 120.4 DSP

The Mosconi RC mini is DSP Accessories from Gladen. It includes a compact DSP mini-controller. Features: Master Volume and Sub Volume with selectable priority for Main or Sub Volume. Additionally, Presets 1 to 4 and Mute are available. An IR sensor allows for 11 learnable functions. The values are displayed via LEDs. Dimensions: 77 x 45 x 24 / 35 mm. Features DSP Accessories Compact DSP mini-controller Master Volume and Sub Volume controllable Selectable priority: Main or Sub Volume Presets 1–4 Mute function IR sensor for 11 learnable functions LED display of values Dimensions 77 x 45 x 24 / 35 mm

The Mosconi ONE 4 130 is a 4-Channel Amplifier from Gladen with Class-AB technology and analog Full Mosfet technology. It can be used as a dual stereo amplifier. The features include Remote Volume Control (optional), a G-HOC slot, and a switchable Low Level / High Level input mode. Auto Sense is active in High Level mode. A 24 Volt version for truck operation is available. The output power is 4 x 130 Watts at 4 Ohms, 4 x 175 Watts at 2 Ohms; bridged at 4 Ohms 2 x 350 Watts. The input sensitivity ranges from 0.35 V to 16 V. The Crossover operates from 20 to 225 Hz with High Pass, Low Pass, or OFF modes. The dimensions are 310 x 200 x 50 mm, and the weight is 2.6 kg. Features 4-Channel Amplifier Class-AB technology Analog Full Mosfet technology Dual stereo amplifier Remote Volume Control (optional) G-HOC slot Low Level / High Level input mode (switchable) Auto Sense (only in High Level mode) 24 Volt version for truck operation available Technical Specifications Output power at 4 Ohms: 4 x 130 Watts Output power at 2 Ohms: 4 x 175 Watts Bridged power at 4 Ohms: 2 x 350 Watts Input sensitivity: 0.35 V – 16 V Crossover: 20 – 225 Hz / High Pass – Low Pass – OFF Dimensions: 310 x 200 x 50 mm Weight: 2.6 kg

The Mosconi Pro 4 10-AAB EVO from Gladen is a 4-Channel Amplifier designed for demanding car audio systems. With the innovative AAB technology, this amplifier ensures maximum sound precision and stable signal processing, even with temperature fluctuations and dynamic music signals. The separate signal and power paths guarantee clear sound reproduction without interference. With flexible applications, such as stereo operation or use in active multi-way systems, the amplifier offers high power and control over the speakers. Thanks to the optimized DirectDSP input, the audio signal remains unchanged and lossless. The compact design and unique aesthetics make the Mosconi Pro 4. 10-AAB EVO is a versatile addition to your car audio system. Analog reference. Developed for maximum sound precision. The MOSCONI PRO 4 10 AAB EVO is a 4-Channel Amplifier for demanding car audio systems, where sound quality and control are the focus. At the center is the AAB technology, an amplifier concept that fundamentally differs from classical Class-AB power amplifiers. Instead of a common control for all power transistors, the output stage operates with distributed control at the component level. The result is particularly stable and linear signal processing, even under real conditions such as temperature changes, load fluctuations, or dynamic music signals. AAB technology: Control at the component level. In classical amplifiers, the entire output stage is controlled via a common operating point. It is assumed that all power transistors operate identically, which is never fully the case in practice. The AAB technology takes a different approach. Each individual power transistor is monitored and controlled separately. Local control loops ensure that each component remains in the optimal operating range at all times – regardless of: Temperature, Current flow, Load behavior, Component tolerances. This results in a significantly more stable and uniform operation of the entire power amplifier. Stability instead of compromise. This distributed architecture reduces typical problems of classical amplifiers: Thermal drift, Unequal distribution between transistors, Unstable operating points, Dependence on component tolerances. Even at high power levels, complex speaker loads, and dynamic music signals, the power amplifier remains controlled and predictable. Separate signal and power paths form the clean basis for sound. The internal architecture consistently separates the sensitive audio signal path from the power supply. High currents and rapid load changes occur in the power supply. The signal path, on the other hand, operates with very low voltages and is sensitive to interference. By clearly separating layout and ground levels, it is prevented that these influences enter the audio signal. This specifically reduces Interference from current peaks, Feedback from the load on the supply, Internal interference within the power amplifier. The signal remains clean, stable, and...

The Mosconi ONE 6 10 DSP is a 6-Channel DSP Amplifier from Gladen with a new design and analog amplifier technology. It features a 10-Channel DSP, bridgeable speaker outputs, and Auto On (High Level). The output power is 6 x 100 Watts at 4 Ohms and 6 x 120 Watts at 2 Ohms; bridged 3 x 240 Watts at 4 Ohms. Additionally, a configuration with 4 x 95 Watts at 4 Ohms plus 1 x 250 Watts BTL is specified. The input sensitivity ranges from 0.35 V to 16 V, and the fuses are rated at 2 x 40 A. Features include an optical digital input (Toslink), optional RTC Remote Control, and analog DSP outputs with 4 x 2 Vrms. The dimensions are 290 x 210 x 55 mm. Features 6-Channel DSP Amplifier New design Analog amplifier technology 10-Channel DSP Bridgeable speaker outputs Auto On (High Level) Optical digital input (Toslink) Remote Control: RTC (optional) Technical Specifications Output power at 4 Ohms: 6 x 100 Watts Output power at 2 Ohms: 6 x 120 Watts Bridged power at 4 Ohms: 3 x 240 Watts Output power at 4 Ohms: 4 x 95 Watts Output power at 4 Ohms (BTL): 1 x 250 Watts Input sensitivity: 0.35 V to 16 V Analog DSP outputs: 4 x 2 Vrms Digital input: Optical (Toslink) Fuses: 2 x 40 A Dimensions: 290 x 210 x 55 mm Remote Control: RTC (optional)

Mosconi BTS-LD4C is DSP Accessories from Gladen. Supports BT audio streaming of uncompressed files, including Apt-X, Wave, Flac (Apple), Lossless, Mp3, A2DP. A2DP in the highest EDR specification from sources like iPads, tablets, and phones with iOS, Android, or Windows. Signal path directly into the digital DSP section of the amplifier. Compatible with PICO DSP, Atomo DSP, and Aerospace DSP. Features DSP Accessories BT audio streaming of uncompressed files like Apt-X, Wave, Flac (Apple), Lossless, Mp3, A2DP A2DP in the highest EDR specification from sources with iOS, Android, or Windows (iPads, tablets, phones) Signal path directly into the digital DSP section of the amplifier Compatible with: PICO DSP, Atomo DSP, Aerospace DSP

The Mosconi Pro 4 30 AAB EVO, a 4-channel high-performance amplifier from Gladen, provides outstanding sound precision through its innovative AAB technology. This technology differs from classical amplifiers by enabling distributed control at the component level, leading to stable and linear signal processing. The amplifier also impresses with its ability to precisely adjust the input sensitivity via dip switches and its compatibility with DSP systems thanks to the optimized DirectDSP input. With robust performance that remains clean even under high loads and real conditions, the Mosconi Pro 4 30 AAB EVO offers both flexibility and control for demanding car audio systems. Analog reference. Designed for maximum sound precision. The MOSCONI PRO 4 30 AAB EVO is a 4-channel power amplifier for demanding car audio systems, where sound quality and control are the focus. At the center is the AAB technology, an amplifier concept that fundamentally differs from classical Class-AB power amplifiers. Instead of a common control for all power transistors, the output stage operates with distributed control at the component level. The result is particularly stable and linear signal processing, even under real conditions such as temperature changes, load fluctuations, or dynamic music signals. AAB technology: Control at the component level. In classical amplifiers, the entire output stage is controlled via a common operating point. It is assumed that all power transistors operate identically, which is never fully the case in practice. The AAB technology takes a different approach. Each individual power transistor is monitored and controlled separately. Local control loops ensure that each component remains in the optimal operating range at all times – regardless of: Temperature, Current flow, Load behavior, Component tolerances. This results in a significantly more stable and uniform operation of the entire power amplifier. Stability instead of compromise. This distributed architecture reduces typical problems of classical amplifiers: Thermal drift, Unequal distribution between transistors, Unstable operating points, Dependence on component tolerances. Even at high power levels, complex speaker loads, and dynamic music signals, the power amplifier remains controlled and predictable. Separate signal and power paths form the clean basis for sound. The internal architecture consistently separates the sensitive audio signal path from the power supply. High currents and rapid load changes occur in the power supply. The signal path operates with very low voltages and is sensitive to interference. By clearly separating layout and ground levels, it is prevented that these influences enter the audio signal. This specifically reduces Interference from current peaks, Feedback from the load on the supply, Internal interference within the power amplifier. The signal remains clean, stable, and uncolored even at high power. Thus, the signal remains clean, stable, and uncolored...