Der blev fundet 40 produkter som matchede din søgning efter capacitor i 7 butikker:

The RFX-90 from Rebec is a Capacitor with a capacity of 1.0 Farad. It operates in a voltage range of 10 V to 16 V. The dimensions of the housing are 214 × 208 × 50 mm. The product meta description also lists a power of 300 W and a frequency range of 20 Hz to 250 Hz. A signal-to-noise ratio of over 85 dB is also specified for this Capacitor. Features Capacitor Manufacturer: Rebec Capacity: 1.0 Farad Operating Voltage: 10 V–16 V Dimensions: 214 × 208 × 50 mm Power: 300 W Frequency Range: 20 Hz - 250 Hz SNR: >85 dB

The R16f from Rebec is a capacitor with a capacity of 16 Farads. It is designed for applications with an operating voltage of 12 V. The maximum peak voltage is 16 V. A technical feature is the low Equivalent Series Resistance (E.S.R.) of 0.0015 Ohm at 120 Hz/25 degrees Celsius. The housing measures 289 x 140 x 50 mm. Features Capacitor Manufacturer: Rebec Capacity: 16 Farads Operating Voltage: 12 V Peak Voltage: 16 V E.S.R.: 0.0015 Ohm at 120 Hz/25 degrees Celsius Size: 289 x 140 x 50 mm

The LW-50W-3.9A is a capacitor from Masori with a 50 W halogen lamp that serves as a load resistor. The cable length is 2x 15 cm, complemented by 2 alligator clips. The charging current is 4–5 A. The halogen lamp lights up during the charging process and goes out once the capacitor is fully charged. The charging time for a 1F Powercap is a few seconds. For a 500F supercapacitor, the charging time is about 3–5 minutes. Features Capacitor 50 W halogen lamp as load resistor Cable length: 2x 15 cm 2 alligator clips Technical Data Charging current: 4–5 A Charging time for 1F Powercap: a few seconds Charging time for 500F supercapacitor: approx. 3–5 minutes Charging indicator: halogen lamp lights up during the charging process and goes out at full charge

250V MKT is a capacitor from Masori from the MKT series with a voltage rating of 250V. Available capacitances are 3.3µF, 4.7µF, 6.8µF, 10µF, and 15µF. The insulation material is made of polyester. The package contains 2 pieces. Crossover frequencies are specified for 4 Ohm and 8 Ohm tweeters depending on the capacitance. Features Capacitor Manufacturer: Masori Series: MKT Voltage rating: 250V Capacitances: 3.3µF; 4.7µF; 6.8µF; 10µF; 15µF Insulation material: Polyester Package contents: 2 pieces Technical Data Crossover frequency 4 Ohm, 3.3µF: 12.06 kHz Crossover frequency 4 Ohm, 4.7µF: 8.47 kHz Crossover frequency 4 Ohm, 6.8µF: 5.85 kHz Crossover frequency 4 Ohm, 10µF: 3.98 kHz Crossover frequency 4 Ohm, 15µF: 2.65 kHz Crossover frequency 8 Ohm, 3.3µF: 6.03 kHz Crossover frequency 8 Ohm, 4.7µF: 4.23 kHz Crossover frequency 8 Ohm, 6.8µF: 2.93 kHz Crossover frequency 8 Ohm, 10µF: 1.99 kHz Crossover frequency 8 Ohm, 15µF: 1.33 kHz

250V MKT is a capacitor from Masori from the MKT series with a voltage rating of 250V. Available capacitances are 3.3µF, 4.7µF, 6.8µF, 10µF, and 15µF. The insulation material is made of polyester. The package contains 2 pieces. Crossover frequencies are specified for 4 Ohm and 8 Ohm tweeters depending on the capacitance. Features Capacitor Manufacturer: Masori Series: MKT Voltage rating: 250V Capacitances: 3.3µF; 4.7µF; 6.8µF; 10µF; 15µF Insulation material: Polyester Package contents: 2 pieces Technical Data Crossover frequency 4 Ohm, 3.3µF: 12.06 kHz Crossover frequency 4 Ohm, 4.7µF: 8.47 kHz Crossover frequency 4 Ohm, 6.8µF: 5.85 kHz Crossover frequency 4 Ohm, 10µF: 3.98 kHz Crossover frequency 4 Ohm, 15µF: 2.65 kHz Crossover frequency 8 Ohm, 3.3µF: 6.03 kHz Crossover frequency 8 Ohm, 4.7µF: 4.23 kHz Crossover frequency 8 Ohm, 6.8µF: 2.93 kHz Crossover frequency 8 Ohm, 10µF: 1.99 kHz Crossover frequency 8 Ohm, 15µF: 1.33 kHz

250V MKT is a capacitor from Masori from the MKT series with a voltage rating of 250V. Available capacitances are 3.3µF, 4.7µF, 6.8µF, 10µF, and 15µF. The insulation material is made of polyester. The package contains 2 pieces. Crossover frequencies are specified for 4 Ohm and 8 Ohm tweeters depending on the capacitance. Features Capacitor Manufacturer: Masori Series: MKT Voltage rating: 250V Capacitances: 3.3µF; 4.7µF; 6.8µF; 10µF; 15µF Insulation material: Polyester Package contents: 2 pieces Technical Data Crossover frequency 4 Ohm, 3.3µF: 12.06 kHz Crossover frequency 4 Ohm, 4.7µF: 8.47 kHz Crossover frequency 4 Ohm, 6.8µF: 5.85 kHz Crossover frequency 4 Ohm, 10µF: 3.98 kHz Crossover frequency 4 Ohm, 15µF: 2.65 kHz Crossover frequency 8 Ohm, 3.3µF: 6.03 kHz Crossover frequency 8 Ohm, 4.7µF: 4.23 kHz Crossover frequency 8 Ohm, 6.8µF: 2.93 kHz Crossover frequency 8 Ohm, 10µF: 1.99 kHz Crossover frequency 8 Ohm, 15µF: 1.33 kHz

250V MKT is a capacitor from Masori from the MKT series with a voltage rating of 250V. Available capacitances are 3.3µF, 4.7µF, 6.8µF, 10µF, and 15µF. The insulation material is made of polyester. The package contains 2 pieces. Crossover frequencies are specified for 4 Ohm and 8 Ohm tweeters depending on the capacitance. Features Capacitor Manufacturer: Masori Series: MKT Voltage rating: 250V Capacitances: 3.3µF; 4.7µF; 6.8µF; 10µF; 15µF Insulation material: Polyester Package contents: 2 pieces Technical Data Crossover frequency 4 Ohm, 3.3µF: 12.06 kHz Crossover frequency 4 Ohm, 4.7µF: 8.47 kHz Crossover frequency 4 Ohm, 6.8µF: 5.85 kHz Crossover frequency 4 Ohm, 10µF: 3.98 kHz Crossover frequency 4 Ohm, 15µF: 2.65 kHz Crossover frequency 8 Ohm, 3.3µF: 6.03 kHz Crossover frequency 8 Ohm, 4.7µF: 4.23 kHz Crossover frequency 8 Ohm, 6.8µF: 2.93 kHz Crossover frequency 8 Ohm, 10µF: 1.99 kHz Crossover frequency 8 Ohm, 15µF: 1.33 kHz

250V MKT is a capacitor from Masori from the MKT series with a voltage rating of 250V. Available capacitances are 3.3µF, 4.7µF, 6.8µF, 10µF, and 15µF. The insulation material is made of polyester. The package contains 2 pieces. Crossover frequencies are specified for 4 Ohm and 8 Ohm tweeters depending on the capacitance. Features Capacitor Manufacturer: Masori Series: MKT Voltage rating: 250V Capacitances: 3.3µF; 4.7µF; 6.8µF; 10µF; 15µF Insulation material: Polyester Package contents: 2 pieces Technical Data Crossover frequency 4 Ohm, 3.3µF: 12.06 kHz Crossover frequency 4 Ohm, 4.7µF: 8.47 kHz Crossover frequency 4 Ohm, 6.8µF: 5.85 kHz Crossover frequency 4 Ohm, 10µF: 3.98 kHz Crossover frequency 4 Ohm, 15µF: 2.65 kHz Crossover frequency 8 Ohm, 3.3µF: 6.03 kHz Crossover frequency 8 Ohm, 4.7µF: 4.23 kHz Crossover frequency 8 Ohm, 6.8µF: 2.93 kHz Crossover frequency 8 Ohm, 10µF: 1.99 kHz Crossover frequency 8 Ohm, 15µF: 1.33 kHz

The MC500 from Musway is a capacitor designed for use in 12 to 15-volt DC systems. It features a digital voltmeter with three digits for voltage monitoring. The device has a stable acrylic mount and compact dimensions of 6.5 x 13.6 cm. The operating temperature range is between -20 and 60 degrees Celsius. An integrated connection for the remote turn-on is available. The wiring is supported by a distribution block with one positive and one negative connection each. Features Capacitor Manufacturer: Musway Digital voltmeter with 3 digits Connection for remote turn-on Stable acrylic mounts Distribution block positive: 1 x 16 mm² IN / 2 x 10 mm² OUT Distribution block negative: 1 x 16 mm² IN / 2 x 10 mm² OUT Dimensions: 6.5 x 13.6 cm Technical Data Operating voltage: 12 - 15 V DC Operating temperature: -20 to 60 degrees Celsius

The P/CAP EVO - 1.5 Farad is a Capacitor from Audio System with a capacity of 1.5 Farads (1,500,000 µF) and a voltage rating of 20 V. A red 3-digit voltage display is integrated, along with a red LED display for the various charging processes. Reverse polarity protection and charging without external components are possible. The connections are configured as input and output, each for 20 to 35 mm². Stable acrylic mounting brackets are included. The dimensions are 250 x 76 mm. Features Capacitor Capacity: 1.5 Farads Voltage rating: 20 V Red 3-digit voltage display Red LED display for charging processes Reverse polarity protection Charging without external components possible Acrylic mounting brackets Connections: Input 1x 20 to 35 mm², Output 1x 20 to 35 mm² Technical Data Capacity: 1,500,000 µF Dimensions: 250 x 76 mm Connection cross-section: 20 to 35 mm² (Input and Output) Connection configuration: 1x Input, 1x Output

MKT CAP is a capacitor from Audio System Italy. Designed as an MKT film capacitor for tweeters. Available in 2.2 µF, 3.3 µF, and 4.7 µF. Each pack contains 10 pieces. Intended for the separation of tweeters via the positive speaker wire. The capacitance values correspond to different crossover frequencies. Features Capacitor MKT film technology For tweeters 10 pieces per pack Available in 2.2 µF, 3.3 µF, and 4.7 µF Installation in the positive speaker wire Technical Data Capacitance: 2.2 µF Capacitance: 3.3 µF Capacitance: 4.7 µF Crossover frequency at 4 Ohm tweeter and 2.2 µF: 15.08 kHz Crossover frequency at 4 Ohm tweeter and 3.3 µF: 12.06 kHz Crossover frequency at 4 Ohm tweeter and 4.7 µF: 8.47 kHz Crossover frequency at 8 Ohm tweeter and 2.2 µF: 8.47 kHz Crossover frequency at 8 Ohm tweeter and 3.3 µF: 6.03 kHz Crossover frequency at 8 Ohm tweeter and 4.7 µF: 4.23 kHz

MKT CAP is a capacitor from Audio System Italy. Designed as an MKT film capacitor for tweeters. Available in 2.2 µF, 3.3 µF, and 4.7 µF. Each pack contains 10 pieces. Intended for the separation of tweeters via the positive speaker wire. The capacitance values correspond to different crossover frequencies. Features Capacitor MKT film technology For tweeters 10 pieces per pack Available in 2.2 µF, 3.3 µF, and 4.7 µF Installation in the positive speaker wire Technical Data Capacitance: 2.2 µF Capacitance: 3.3 µF Capacitance: 4.7 µF Crossover frequency at 4 Ohm tweeter and 2.2 µF: 15.08 kHz Crossover frequency at 4 Ohm tweeter and 3.3 µF: 12.06 kHz Crossover frequency at 4 Ohm tweeter and 4.7 µF: 8.47 kHz Crossover frequency at 8 Ohm tweeter and 2.2 µF: 8.47 kHz Crossover frequency at 8 Ohm tweeter and 3.3 µF: 6.03 kHz Crossover frequency at 8 Ohm tweeter and 4.7 µF: 4.23 kHz

MKT CAP is a capacitor from Audio System Italy. Designed as an MKT film capacitor for tweeters. Available in 2.2 µF, 3.3 µF, and 4.7 µF. Each pack contains 10 pieces. Intended for the separation of tweeters via the positive speaker wire. The capacitance values correspond to different crossover frequencies. Features Capacitor MKT film technology For tweeters 10 pieces per pack Available in 2.2 µF, 3.3 µF, and 4.7 µF Installation in the positive speaker wire Technical Data Capacitance: 2.2 µF Capacitance: 3.3 µF Capacitance: 4.7 µF Crossover frequency at 4 Ohm tweeter and 2.2 µF: 15.08 kHz Crossover frequency at 4 Ohm tweeter and 3.3 µF: 12.06 kHz Crossover frequency at 4 Ohm tweeter and 4.7 µF: 8.47 kHz Crossover frequency at 8 Ohm tweeter and 2.2 µF: 8.47 kHz Crossover frequency at 8 Ohm tweeter and 3.3 µF: 6.03 kHz Crossover frequency at 8 Ohm tweeter and 4.7 µF: 4.23 kHz

The ATX1200CAP from Autotek is a capacitor that is ideal for systems with an operating voltage of 12 to 16 VDC. With a capacity of 1.2 F, it is reliably usable in a temperature range of –20 to 60° C. Its special features include the 4-digit voltage display, stable acrylic mounts, and an automatic power-on function. With dimensions of 125 x 76 x 260 mm, the ATX1200CAP offers a compact design that allows for versatile application possibilities. Technical Data 1.2 F capacity Operating voltage 12 - 16 VDC Operating temperature –20 ~ 60° C 125 x 76 x 260 mm features 4-digit voltage display Stable Acrylic Holders Automatic power-on function

Discover the RS-CAP8F from Reiss Audio, a capacitor designed for high capacitance and reliable performance. It's engineered to enhance the performance of your sound system. Reiss Audio's proven quality ensures that your audiovisual needs are met. Ideal for anyone who wants to get the most out of their sound system.

The Reiss Audio RS-CAP4F is a high-quality capacitor specifically designed for audio applications. With a capacitance of 4 farads, this capacitor supports the performance of your high-performance car audio system by stabilizing the voltage and acting as an energy reserve. This reduces the risk of voltage drops and improves sound quality. Ideal for music lovers, the RS-CAP4F's advanced technology ensures clear and powerful sound reproduction. The capacitor guarantees reliable power delivery, especially during fast bass transitions, and contributes to improved dynamics in your audio system.

The Reiss Audio RS-CAP2F is a 2-farad capacitor specifically designed for high-performance car audio systems. It provides reliable voltage stabilization and acts as an energy reserve for rapid bass transitions. This reduces the risk of voltage drops and improves both the dynamics and sound quality of your audio system.

The Hifonics Zeus ZXT5.0 - 5 Farad is a capacitor with hybrid technology and a nominal capacity of 5 Farads. It features 50 mm² IN & OUT power connections and supports cable cross-sections up to 50 mm². The operating voltage is 11–16 Volt DC, and the ESR is 0.0015 Ohm at 120 Hz. A blue digital 3-digit voltmeter and a remote connection are integrated. The dimensions are 145 x 70 x 285 mm. Designed for amplifier power up to 5000 Watts. Features Capacitor Hybrid technology Nominal capacity: 5 Farads Remote connection 50 mm² IN & OUT power connections Cable cross-sections up to 50 mm² Designed for amplifier power up to 5000 Watts Technical Data Operating voltage: 11–16 Volt DC ESR: 0.0015 Ohm at 120 Hz Dimensions: 145 x 70 x 285 mm Digital voltmeter: 3-digit, blue

The Reiss Audio RS-CAP16F is a capacitor that stands out for its exceptional performance. It helps your audio system produce consistent and powerful sound. With advanced technology, it ensures a stable power supply and optimized sound quality. This capacitor is ideal for anyone seeking a premium listening experience.

The Reiss Audio RS-CAP20F is a 20-farad capacitor specifically designed for high-performance car audio systems. It helps stabilize voltage and acts as a power reserve to efficiently supply your amplifier during fast bass transitions. By reducing the risk of voltage drops, it contributes to improved dynamics and sound quality in your audio system.