764 products were found matching your search for amplifiers in 4 shops:

The Rebec D800 is a 1-Channel Amplifier in Class D design. It delivers 800 W RMS at 1 Ohm. The frequency range is 20–160 Hz. The input sensitivity is 0.4–5.5 V. The signal-to-noise ratio is specified at >80 dB. Protection is provided by three 25 A fuses. The dimensions are 271 x 170 x 50 mm. Features 1-Channel Amplifier Class D 800 W RMS at 1 Ohm Frequency range 20–160 Hz Dimensions 271 x 170 x 50 mm Technical Specifications Number of channels 1 Input sensitivity 0.4–5.5 V Signal noise >80 dB Fuses 25 A x3

Yo Curls Amplifier 100mL

The ES2s is a 2-Channel Amplifier from Rebec with Class AB technology. The RMS power ratings are 2 x 500 W at 2 Ohm and 2 x 250 W at 4 Ohm, bridged at 4 Ohm 1 x 750 W. The frequency range is from 20 Hz to 35 kHz. Protection is provided by 3 x 25 A fuses. Dimensions are 421 x 240 x 63 mm, weight is 7 kg. Features 2-Channel Amplifier Amplifier class: AB Number of channels: 2 Frequency range: 20 Hz – 35 kHz Fuses: 3 x 25 A Dimensions: 421 x 240 x 63 mm Weight: 7 kg Technical specifications Power at 2 Ohm RMS: 2 x 500 W Power at 4 Ohm RMS: 2 x 250 W Power at 4 Ohm bridged RMS: 1 x 750 W Number of channels: 2 Amplifier class: AB Frequency range: 20 Hz – 35 kHz Fuses: 3 x 25 A Dimensions: 421 x 240 x 63 mm Weight: 7 kg

Ensure crystal-clear signal strength across multiple devices with the Antsig Distribution Amplifier 8 Way — a reliable and high-performance solution for distributing digital TV, FM, or DAB signals to multiple TVs or tuners in your home or commercial setup. This amplifier is designed to boost signal strength and maintain picture and sound quality, especially in areas with weak reception. Whether you're connecting TVs in different rooms or setting up a home entertainment system, Antsig delivers superior signal stability and wide coverage, making it the perfect choice for seamless media enjoyment. 🔶 ( 8-Way Signal Distribution ) – Distributes amplified signal to up to 8 different TVs or devices without signal loss. 🔶 ( High Gain Amplification ) – Enhances weak signals, improving clarity and reception across all connected devices. 🔶 ( Digital TV, FM & DAB Compatible ) – Supports a wide range of signals for versatile use in your entertainment setup. 🔶 ( Easy Plug-and-Play Installation ) – Simple setup with no complex configuration needed; ready to go out of the box. 🔶 ( Low Noise Output ) – Delivers a clean, interference-free signal for superior audio and video performance. 🔶 ( Compact & Durable Design ) – Space-saving design fits easily into any setup and built with long-lasting components. 🔶 ( Ideal for Homes & Commercial Spaces ) – Perfect for large households, offices, apartments, and hotels. 🔶 ( Power Supply Included ) – Comes complete with its own power adapter for uninterrupted performance. 🔶 ( Stable Signal Across All Ports ) – Ensures consistent signal strength across all 8 outputs. 🔶 ( Wall-Mountable Option ) – Flexible installation with optional wall mounting for better space management.   The Antsig Distribution Amplifier 8 Way is the ultimate solution for homes or businesses needing consistent, high-quality signal distribution across multiple screens. Say goodbye to signal dropouts and enjoy uninterrupted entertainment with strong, stable performance in every room. Ideal for digital TV installations, this amplifier ensures you get the best possible viewing and listening experience from all your connected devices.

Nakamichi presents the FHA400, a 4-Channel Amplifier of Class A/B. The device delivers an RMS power of 4x190 W at 2 Ohms and 4x150 W at 4 Ohms. In bridged mode at 4 Ohms, the RMS power reaches 2x380 W. The frequency range extends from 10 Hz to 32000 Hz. Features include integrated high-pass, band-pass, and low-pass filters, as well as an input sensitivity of 0.35 V to 9 V. The dimensions are 384x190x62 mm with a weight of 4.7 kg. The signal-to-noise ratio is ≥105 dB and the maximum current consumption is 80 A. Features 4-Channel Amplifier Amplifier Class: Class A/B Power at 2 Ohms: 4x190 Watts RMS Power at 4 Ohms: 4x150 Watts RMS Power at 4 Ohms bridged: 2x380 Watts RMS Integrated high-pass, band-pass, and low-pass filters Dimensions (LxHxW): 384x190x62 mm Weight: 4.7 kg Technical Specifications Frequency Range: 10-32000 Hz Input Sensitivity: 0.35 V - 9 V Maximum Current Consumption: 80 A Recommended Power and Ground Cable: 20 mm2 Signal-to-Noise Ratio: ≥105 dB Fuses: 2x40 A THD: ≤0.2 %

Apple-designed H2 chip, the force behind AirPods Pro, pushes advanced audio performance even further. From smarter noise cancellation to superior three-dimensional sound and battery life, it improves on the best features of AirPods Pro in a big way. Low-distortion, custom-built driver and amplifier deliver crisp, clear high notes and deep, rich bass in stunning definition. Every sound is more vivid than ever. Adaptive Audio dynamically blends Transparency mode and Active Noise Cancellation to deliver the best listening experience for you in any environment. Up to 2x more Active Noise Cancellation than the previous-generation AirPods Pro, so you’ll hear dramatically less noise during your commute and when you need to focus Transparency mode lets outside sound in, so you can hear what’s going on around you.

The N40t from Nakamichi is a 4-Channel Amplifier with a maximum power of 4000 W. The model delivers an N-Power output of 150 W x 4 at 4 Ohms and 225 W x 4 at 2 Ohms. In bridged mode at 4 Ohms, the power is 450 W x 2. The frequency response covers the range from 15 Hz to 250 Hz. The dimensions of the housing are 476 x 214 x 60 mm with a net weight of approximately 5.0 kg. Features include flexible adjustment options such as bass boost from 0 dB to 12 dB and a low-pass crossover frequency from 50 Hz to 500 Hz. The signal-to-noise ratio is specified at a minimum of 90 dB. Features 4-Channel Amplifier Power: 150 W x 4 at 4 Ohms Power: 225 W x 4 at 2 Ohms Power: 450 W x 2 bridged output at 4 Ohms Power: 4000 W Max Dimensions: 476 x 214 x 60 mm Weight: approx. 5.0 kg Adjustable bass boost: 0 dB to 12 dB Low-pass crossover frequency: 50 Hz to 500 Hz Signal-to-noise ratio: ≥90 dB Included: N40t, 2 user manuals, 4 mounting screws (4x20 mm), 3 keys (2 mm, 2.5 mm, 3 mm), high-level input cable, 2 gloves, 4 fuses Technical Specifications Frequency response: 15 Hz to 250 Hz Input sensitivity: 60 mV to 6 V Total harmonic distortion: ≤0.2 % Fuse size: 30A x 4 Minimum impedance: 20 K Remote control for subwoofer level: No

24HR VERTICAL LIFT EFFECT FOR THE LASHES OF YOUR DREAMS! Pillow Talk Push Up Lashes! mascara is my LASH INNOVATION and the secret to instant  LENGTH, WEIGHTLESS VOLUME, STRETCH and a 24-HOUR VERTICAL LIFT EFFECT for the LASHES OF YOUR DREAMS! Pillow Talk Push Up Lashes is your beauty AMPLIFIER to make your eyes look bigger, brighter and more awake! Make your eye colour POP and create the perfect Pillow Talk lash! Super Black is a classic jet-black shade to add definition and intensity for dark, thick and full looking lashes! 96% agree lashes LOOK MAGNIFIED & AMPLIFIED ! 96% agree mascara VISIBLY LENGTHENS the lashes! 93% agree mascara gives lashes a VOLUMINOUS DEFINITION*! ONE PILLOW TALK PRODUCT IS SOLD EVERY 10 SECONDS GLOBALLY**! IT'S ICONIC! It's not just a colour, Pillow Talk is a BEAUTIFYING WORLD to make your beauty dreams come TRUE! It's EVERYONE'S PERFECT SHADE for every moment - from a soft, dreamy look for day or dialled up for disco! Shop the full collection here, darling! SKU: EPTMX10X1R

The N60T from Nakamichi is a 6-Channel Amplifier with a maximum power of 4000 W. The device covers a frequency range from 10 Hz to 25 kHz and has a signal-to-noise ratio of at least 90 dB. The input sensitivity is adjustable in a range from 200 mV to 6 V. The amplifier allows for various output configurations, including a bridged output at 4 Ohms. For sound adjustment, a low-pass crossover frequency and a bass boost of 0 dB to 12 dB are integrated. The housing has dimensions of 476 x 214 x 60 mm with a net weight of approximately 5.0 kg. The package includes mounting materials, tools, a high-voltage cable, and replacement fuses. Features 6-Channel Amplifier Maximum power: 4000 W Output power at 2 Ohms: 150 W x 6 Output power at 4 Ohms: 100 W x 6 Bridged output at 4 Ohms: 300 W x 3 Dimensions: 476 x 214 x 60 mm Net weight: approx. 5.0 kg Bass boost: 0 dB to 12 dB Low-pass crossover frequency: 50 Hz to 500 Hz Fuse size: 30A x 4 Technical Specifications Frequency response: 10 Hz to 25 kHz Signal-to-noise ratio: ≥90 dB Total harmonic distortion: ≤0.2 % Input sensitivity: 200 mV to 6 V Minimum impedance: 20 K Remote control for Subwoofer: No

24HR VERTICAL LIFT EFFECT FOR THE LASHES OF YOUR DREAMS! Pillow Talk Push Up Lashes! mascara is my LASH INNOVATION and the secret to instant  LENGTH, WEIGHTLESS VOLUME, STRETCH and a 24-HOUR VERTICAL LIFT EFFECT for the LASHES OF YOUR DREAMS! Pillow Talk Push Up Lashes is your beauty AMPLIFIER to make your eyes look bigger, brighter and more awake! Make your eye colour POP and create the perfect Pillow Talk lash! Super Black is a classic jet-black shade to add definition and intensity for dark, thick and full looking lashes! 96% agree lashes LOOK MAGNIFIED & AMPLIFIED ! 96% agree mascara VISIBLY LENGTHENS the lashes! 93% agree mascara gives lashes a VOLUMINOUS DEFINITION*! IT'S ICONIC! It's not just a colour, Pillow Talk is a BEAUTIFYING WORLD to make your beauty dreams come TRUE! It's EVERYONE'S PERFECT SHADE for every moment - from a soft, dreamy look for day or dialled up for disco! Shop the full collection here, darling! SKU: EPTMX10X2R

The NKTA60.4 from Nakamichi is a 4-Channel Amplifier of Class A/B with a maximum power of 1500 Watts. The rated power is 60 Watts at 4 Ohms, 70 Watts at 2 Ohms, and 120 Watts at 4 Ohms in bridged mode. The device has compact dimensions of 318x217x50 mm and a net weight of approximately 2.1 kg. A signal-to-noise ratio of ≥90 dB and a frequency response of 20 Hz to 20 kHz characterize the technical parameters. The input sensitivity is adjustable in a range from 0.15 V to 8 V. For protection, two 20A fuses are installed. Features 4-Channel Amplifier Amplifier Class: Class A/B Rated Power at 4 Ohms: 60 W x 4 Rated Power at 2 Ohms: 70 W x 4 Rated Power at 4 Ohms bridged: 120 W x 2 Max. Power: 1500 W Dimensions (LxHxB): 318x217x50 mm Net Weight: approx. 2.1 kg Technical Specifications Frequency Response: 20 Hz – 20 kHz Signal-to-Noise Ratio: ≥90 dB Sensitivity: 0.15 V - 8 V Fuse Size: 20Ax2

About this product: Model: HW-S50B/XU Sound Technology: 140 watts output 3D sound technology for immersive experiences Dolby and DTS sound technology Audio Processing: 3 channels in the system Built-in active amplifier Connectivity: Optical audio port (cable not included) HDMI port(s) (cable not included) Bluetooth enabled Setup and Features: Power consumption: 25W Auto power off feature Wall-mountable (fixings included) Dimensions: Speaker bar size: H6.23 x W67 x D10.5cm, Weight: 2.4kg System size: H6.23 x W67 x D10.5cm, Weight: 2.4kg General Information: Included: Remote Controller, Power Adaptor, Wallmount Kit, Remote Controller Batteries (2 x AAA included) Remote control included (batteries included) EAN: 8806094353051 Additional Features: Samsung Q-Symphony for immersive surround sound with compatible Samsung TVs Dedicated built-in center speaker for clear dialogue Night Mode and Voice Enhancement Mode for optimal sound at any time Compatible with Samsung wireless subwoofer and rear speaker Kit (sold separately) for expanded sound without messy cables.

The N10 from Nakamichi is a 1-Channel Amplifier with a maximum output power of 6000 W. The model delivers a power of 2000 W at 1 Ω, 1200 W at 2 Ω, and 800 W at 4 Ω. The frequency response covers the range from 15 Hz to 250 Hz. The input sensitivity is adjustable between 60 mV and 6 V. A low-pass crossover frequency can be regulated from 50 Hz to 500 Hz. The equipment includes an external remote control for adjusting the subwoofer volume. Bass boost is possible in the range of 0 dB to 12 dB. The device has a net weight of 5.3 kg. Features 1-Channel Amplifier Maximum power: 6000 W Output power at 1 Ω: 2000 W x 1 Output power at 2 Ω: 1200 W x 1 Output power at 4 Ω: 800 W x 1 Dimensions (LxHxB): 476 x 214 x 60 mm Net weight: approx. 5.3 kg Remote control for subwoofer volume included Delivery includes: user manuals, mounting screws, wrench, gloves, remote control, fuses Technical Specifications Frequency response: 15 Hz–250 Hz Input sensitivity: 60 mV to 6 V Signal-to-noise ratio: ≥90 dB Total harmonic distortion: ≤0.2 % Low-pass crossover frequency: 50 Hz–500 Hz Bass boost: 0 dB–12 dB Minimum impedance: 20 K Fuse size: 35A x 6

The KEY200.4 from KICKER is a 4-channel amplifier that takes your sound experience to a new level. The Class-D amplifier technology and an output of 50 watts RMS x 4 at 4 ohms guarantee you a powerful performance. Automatic adjustments such as a 40-band EQ and 24 dB/octave crossover filter are just some of the numerous features you can expect with this device. Numerous setting options and customization options make the KEY200.4 an excellent choice for any music lover. Technical data 4-channel amplifier 50 Watt RMS x 4 at 4 Ohm not bridgeable - minimum impedance of 4 ohms per channel Class-D amplifier technology KEY Auto Setup adjusts the signal for your vehicle Calibration microphone and activation button included Pink Noise test tones available on Kicker.com automatic adjustments include 40-band EQ, 24 dB/octave crossover filter, time alignment Bi-Amp mode applies the high/low crossover settings during KEY Auto Setup switchable auto-compression selectable high-pass filters (off, 60, 80, 120 Hz; 24 dB/octave) automatic limiter with clip lights preamplifier and speaker level inputs DC offset detection for speaker level inputs Radio-Detect circuit provides speaker load for receiver to detect Wiring and hardware not included with the amplifier 12- or 10-pin power and ground cables recommended Fuse rating: 20A x 1 Dimensions: 7-3/8"W x 1-11/16"H x 2-3/4"D Warranty: 1 year RMS output power (watts x channels) 50 x 4 Peak Output Power (Watts x Channels) N/A Power at 2 Ohms (Watt x Channels) N/A Bridged Power (Watt x Channels) N/A Minimum impedance bridged N/A Minimum impedance not bridged 4 minimum impedance 4 Best frequency response 20-20k Hz Distortion factor at nominal RMS power 1 signal-to-noise ratio 90 dB input voltage 14.4 V

Magnifico 1 is a 1-Channel Amplifier from Xcelsus with Class D technology. The RMS power is 300 W at 4 Ohms, 600 W at 2 Ohms, and 1000 W at 1 Ohm. The total harmonic distortion is 0.01%. Connections include High Level Input and RCA input. Low-pass filter is present, high-pass filter is not present. Operating voltage is 11–16 V, recommended Power Cable cross-section is at least 20 mm2, dimensions are 320 x 135 x 55 mm. Features 1-Channel Amplifier Manufacturer: Xcelsus Amplifier Class: Class D RMS Power 4 Ohm: 300 W RMS Power 2 Ohm: 600 W RMS Power 1 Ohm: 1000 W Total Harmonic Distortion (THD): 0.01% High Level Input: Yes RCA Input: Yes Low-pass Filter: Yes High-pass Filter: No Technical Specifications Number of Channels: 1 Model: Xcelsus Magnifico1 Operating Voltage: 11–16 V Recommended Power Cable min.: 20 mm2 Dimensions: 320 x 135 x 55 mm

The CS1212 from Rebec is a 12-Channel DSP Amplifier based on compact Class D technology. The device operates in a frequency range of 20 Hz to 20 kHz and has a signal-to-noise ratio of over 95 dB. The power supply is designed for a range of 10 to 16 V. The input sensitivity varies between 0.4 and 11.5 V. For connectivity, Bluetooth, USB playback, and a fiber optic input up to 96 kHz are available. The output power is specified at 10x60 W plus 2x80 W at an impedance of 4 Ohms. Additionally, a bridging function is integrated, allowing for a power output of up to 200 W. Features 12-Channel DSP Amplifier Class D operating mode Output power: 10x60 W RMS at 4 Ohm Output power: 2x80 W RMS at 4 Ohm Output power in bridge mode: 1x200 W Bluetooth interface USB playback Fiber optic input up to 96 kHz Compact design Technical Specifications Frequency range: 20 Hz–20 kHz Input sensitivity low level: 0.4–2.0 V Input sensitivity high level: 3.0–11.5 V Power supply: 10–16 V Signal-to-noise ratio: >95 dB Inputs: 2 Low Level, 12 High Level Internal Fuse: 30A x 2

The Rebec A1200.d is a 1-Channel Amplifier of Class D. The device achieves a maximum output power of 1200 W RMS at 1 Ohm. Its compact design has dimensions of 255 x 186 x 51 mm. For sound adjustment, adjustable high-pass and low-pass filters as well as bass boost are integrated. The frequency response is variable in the range of 10 Hz to 1 kHz. A signal-to-noise ratio of over 95 dB characterizes the technical specifications. Features 1-Channel Amplifier Amplifier Type Class D Output Power: 1x450 W RMS at 4 Ohm Output Power: 1x738 W RMS at 2 Ohm Output Power: 1x1200 W RMS at 1 Ohm Dimensions: 255 x 186 x 51 mm Signal-to-Noise Ratio: >95 dB (A-weighted) Bass Boost: 0–12 dB (45 Hz) Technical Specifications Frequency Response: 10 Hz–150 Hz (LPF) / 10 Hz–1 kHz (FULL) High-Pass Frequency: 10–50 Hz adjustable Low-Pass Frequency: 50–150 Hz adjustable Distortion (THD): <0.05 % Input Sensitivity: 0.3–6 Volts Input Impedance: 30 kOhm Operating Voltage: 10–16 Volts

The Rebec ES4s is a 4-Channel Amplifier of Class AB with 150 W RMS at 4 Ohms. The frequency range is from 20 Hz to 35 Hz. The damping factor is specified at 0.03%. The signal-to-noise ratio is 0.01%. The total harmonic distortion is specified at 99 dB. The housing measures 421 x 240 x 63 mm, and the weight is 6.2 kg. Four 25 A fuses are integrated. Features 4-Channel Amplifier Class AB 150 W RMS at 4 Ohms Fuses 4 x 25 A Dimensions 421 x 240 x 63 mm Weight 6.2 kg Technical Specifications Number of Channels 4 Frequency Range 20 Hz to 35 Hz Damping Factor 0.03% Signal Noise 0.01% Total Harmonic Distortion 99 dB

The BTS from Musway is an Amplifier Accessories with an integrated Bluetooth receiver for wireless streaming. The hardware is compatible with all Musway DSP models. The housing features a backlit Musway logo. The package includes a USB connection cable. The dimensions are 32 x 10 x 60 mm. Features Amplifier Accessories Compatible with all Musway DSP models Integrated Bluetooth receiver Backlit Musway logo Includes USB connection cable Dimensions: 32 x 10 x 60 mm

Experience the high-end 1-channel amplifier MBM1.24V-4G from Ampire, specifically designed for your truck, bus, or boat in the 24-volt operating voltage range. Precisely and efficiently, it delivers excellent sound with 500 watts RMS and an impressive 1000 watts maximum output power. This mono digital amplifier is characterized not only by its ultra-compact design but also by useful features such as RCA inputs and speaker inputs with auto-turn-on function. An additional feature is the illuminated Ampire logo, which gives the amplifier a modern and distinctive look. Features Mono digital amplifier for 24 volt operating voltage in truck, bus or boat Ultracompact design Cinch inputs Speaker inputs with auto turn-on function 500 Watt RMS/1000 Watt max. Illuminated AMPIRE Logo power supply Operating voltage: 20-32 Volt DC Remote voltage: 8-28 Volt DC Standby current: 0.86A Standby current when switched off: 85dB Input sensitivity: 200mV - 6.0V active switch Low-pass filter: 30Hz-250Hz Slope: 12dB Bass Boost Gain: 0-12dB Bass Boost Frequency: 40-100Hz variable Subsonic filter: 20Hz/24dB Miscellaneous Dimensions (LxWxH): 251 x 141 x 50mm Weight: 1.90Kg Inputs: 2x RCA, 2x Speaker (High Level Auto Turn On for radios with BTL amplifiers) Cable cross-section of the connection terminals Power supply up to 35mm2 Speakers up to 10mm2