703 products were found matching your search for analog in 1 shops:

Converts analog L/R audio to digital coaxial and Toslink audio signalsInput: 2x Cinch (L/R audio)Output: 1x Toslink, 1x Cinch (coaxial)Sampling rate: 48 kHzSupports uncompressed 2-channel LPCM digital audio signal outputProvides electromagnetic-noise-free transmissionExternal power supply: 5V DC, 1A (included)The analog to digital audio converter converts analog L/R to digital Coaxial and Toslink audio signals simultaneously. It supports an uncompressed 2-channel LPCM digital audio signal output with a sampling rate of 48 kHz. Ideal for home use or professional audio switching.

DS1307, Serial, I2C Real-Time ClockDescription:The DS1307 serial RTC is a low-power, full BCD clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I2C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. A built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply.Features• Completely Manages All Timekeeping Functionso Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100o 56-Byte, Battery-Backed, General-Purpose RAM with Unlimited Writeso Programmable Square-Wave Output Signal• Simple Serial Port Interfaces to Most Microcontrollerso I2C Serial Interface• Low Power Operation Extends Battery Backup Run Timeo Consumes Less than 500nA in Battery-Backup Mode with Oscillator Runningo Automatic Power-Fail Detect and Switch Circuitry• 8-Pin DIP and 8-Pin SO Minimizes Required Space• Underwriters Laboratories® (UL) Recognized

quartz alarm clockeasy to read dialCresendo alarmalarm repetitiondial illumination selectable: permanent or by pressing a buttonquiet and precise quartz movementluminous hands

quartz alarm clockeasy to read dialCresendo alarmalarm repetitiondial illumination selectable: permanent or by pressing a buttonquiet and precise quartz movementluminous hands

The converter converts the incoming digital audio signal via coaxial cable or TOSLINK and generates a high-quality analogue signal that is output via Cinch/RCA or 3.5 mm jack. With 192 kHz, the D/A converter supports a comparatively high sampling rate of the channels. External digital-to-analogue converter converts digital input signals from the coaxial or TOSLINK connection into analogue stereo signals Signal output via two Cinch sockets (audio left/right) or a 3.5 mm jack socket D/A converter connects e.g. a digital source such as a Blu-ray player or game console with analogue equipment such as a stereo system or headphones Conversion of the audio signal only works in the direction of optical to analogue or digital to analogue Digital-to-analogue converter synchronises sound without delay when connected Robust, durable aluminium housing ensures reliable heat dissipation Power supply for the D/A converter via a 5 V power supply unit (included in delivery) Technical Data unit connections Input 1 : Toslink socket Input 2 : Cinch socket (digital audio, S/PDIF) Output 1 : 2x Cinch socket (audio left/right) Output 2 : 3.5 mm jack socket (3-pin stereo) General Colour : black Operating temperature from 0 °C to 40 °C Dimensions / Weight Length : 58.5 mm Width : 55 mm Height : 21 mm Weight : 89 g Scope of delivery Digital-to-analogue converter Power supply 5.0 V with 80 cm cable Operating instructions

quartz alarm clocksilent movement (sweep-movement)analog displayplastic casealarm repetitionluminous handsLED illuminationalarm on/off switchvery large case12 x 13 x 7 cm

Converts digital coaxial or Toslink audio signals to analog L/R audioInput: 1x Toslink, 1x Cinch (coaxial)Output: 2x Cinch (L/R audio)Bit rate: 24-bitSampling rate: 32, 44.1, 48 and 96 kHzProvides electromagnetic-noise-free transmissionExternal power supply: 5V DC, 1A (included)The digital to analog audio converter converts digital Coaxial or Toslink audio signals to analog L/R audio. Standard RCA-style jacks enable you to connect the converter to an external device like an amplifier. Ideal for home use or professional audio switching.

Converts digital coaxial or Toslink audio signals to analog L/R audio and AuxInput: 1x Toslink, 1x Cinch (coaxial)Output: 2x Cinch (L/R audio), 3.5 mm audio jackBit rate: 24-bitSampling rate: 32, 44.1, 48 and 96 kHzProvides electromagnetic-noise-free transmissionExternal power supply: 5V DC, 1A (included)The digital to analog audio converter converts digital Coaxial or Toslink audio signals to analog L/R audio. Standard Cinch jacks and an addition 3.5 mm jack enable you to connect the converter to an external device like an amplifier or headset. Ideal for home use or professional audio switching.

An essential accessory for your electronics workshop. These regulating transformers are designed for checking and testing any consumers that run on an alternating voltage of 0 to 250 volts.Input: 230 V8 A/2000 WAnalogue displayOutput: any value between 0 and 250 VFully enclosed housing with fuse and voltmeterLarge adjustment knob with printed scaleCAUTION: no galvanic isolationIncluded in delivery1x regulating transformer1x instructions

quartz alarm clocksilent movement (sweep-movement)analog displayplastic casealarm repetitionluminous handsLED illuminationalarm on/off switchvery large case12 x 13 x 7 cm

radio-controlled alarm clock, analogfully automatic settingabsolute time precisionalarm repetitionalarm on/off switchilluminationluminous hands10 x 11,5 x 5 cm

radio-controlled alarm clock, analogfully automatic settingabsolute time precisionalarm repetitionalarm on/off switchilluminationluminous hands10 x 11,5 x 5 cm

quartz wall clockwith high precisionquiet movementwell readable dialcase: O 20 x 3,2 cmpacking case: 25 x 25 x 5,5 cm

Radio controlled alarm clock, analogAnalog radio controlled alarm clockwith digital temperature displayTemperature display °C / °FRepeat alarm / SnoozeBacklight

quartz wall clockwith high precisionquiet movementwell readable dialcase: O 20 x 3,2 cmpacking case: 25 x 25 x 5,5 cm

Radio controlled alarm clock, analogAnalogue radio controlled alarm clockwith digital temperature displayTemperature display °C / °FRepeat alarm / SnoozeBacklight

Analog radio wall clockRadio controlled wall clock with highest accuracyBrushed aluminum frameGlass coverIdeal for home, office and as a giftPackage contents:1x radio wall clock1x instruction manual

An essential accessory for your electronics workshop. These regulating transformers are designed for checking and testing any consumers that run on an alternating voltage of 0 to 250 volts.Input: 230 V4 A/1000 WAnalogue displayOutput: any value between 0 and 250 VFully enclosed housing with fuse and voltmeterLarge adjustment knob with printed scaleCAUTION: no galvanic isolationIncluded in delivery1x regulating transformer1x instructions

ELT-2 LoRaWAN multisensorDigital input1x external I/OAnalog 0-10V inputLoRa Alliance certifiedConfiguration via NFC or ''over the air''LoRaWAN class A/C end devicePowered by 1x 3.6V AA lithium battery (not included)Up to 10 years battery life (depending on configuration)The ELT 2 is capable of solving almost any problem. It is housed in an IP67 enclosure, making it ideal for mounting outdoors or in extreme conditions. The ELT 2 can measure both analog and digital signals and can handle up to two external sensors simultaneously. Not only can external sensors be connected to the ELT-2, but it also has four internal sensors: Temperature sensorhumidity sensoraccelerometerAir pressure sensorPulseAntenna and battery are not included.

LoRa Adeunis LoRaWAN 2 input 0-10V or 4-20mA analog external sensor2 inputs 0-10V or 4-20mA- Possibility to trigger the measurement through 2 dedicated inputsLocal and remote configuration- Controlled consumption for optimal autonomy.Development of new preventive maintenance services, alerts and analysis.Periodic or event modeReplaceable battery/external power supply (PWR version)Dimensions: 105 x 50 x 27 mmHousing: IP67Integrated mounting system: DIN rail, pipe, wall mounting, flangeZone: Sigfox: RC1 / LoRaWAN™: EU863-870- Operating temperature range: -25°C to + 70°C.Weight: 70 gStandards: Directive 2014/53/EU (RED).Warning regarding product failure, configuration error, low battery.Instructions for generating the App Key can be found under Data Sheets.