1042 products were found matching your search for bopla in 1 shops:

HousingHigh-quality, dust-proof and splash-proof housing series

Pressure compensation fitting nickel-plated brassCable diameter 4-7mmProtection class IP66/IP67

New design and innovative features protect sensitive components even in demanding environmentsCaptive lid with recessed area for mounting input units (2mm)Thanks to the integrated hinge, convenient access to the interior is ensured and wiring between assemblies in the lid and base is perfectly protected.Prepared for cost-efficient integration of pressure compensation elementsAll housing components are made of metal and thus optimally suited for use in harsh environmental conditionsNo visible housing screwsIP 66 / IP 68 (1.2 m - 2 h) / IP 69 DIN EN 60529Impact resistance IK 08 (max. IP 66 / IP 68) or IK 07 according to IEC 62262 (IP 69)Housing: GD Al Si 12, seal PU foamedMaterials according to requirement set R1 resp. R7 according to DIN EN 45545-2 of hazard level HL3Scope of delivery: Housing incl. hinge and fixing material

Enclosure with membrane keyboard surface (1 mm)The enclosure profiles are equipped with grooves to accommodate PCBs or mounting platesThe cover offers various possibilities for attaching plug-in connectors, printing, etc.End cover made of anodised aluminiumThe enclosures are equipped with a 1 mm or 1.5 mm recessed surface for membrane keyboardsThe enclosure halves are automatically screwed together when the enclosure covers are fittedProtection class IP40Scope of delivery: 2 x enclosure halves, 4 screws for mounting the cover, 2 x covers

New design and innovative features protect sensitive components even in demanding environmentsCaptive lid with recessed area for mounting input units (2mm)Thanks to the integrated hinge, convenient access to the interior is ensured and wiring between assemblies in the lid and base is perfectly protected.Prepared for cost-efficient integration of pressure compensation elementsAll housing components are made of metal and thus optimally suited for use in harsh environmental conditionsNo visible housing screwsIP 66 / IP 68 (1.2 m - 2 h) / IP 69 DIN EN 60529Impact resistance IK 08 (max. IP 66 / IP 68) or IK 07 according to IEC 62262 (IP 69)Housing: GD Al Si 12, seal PU foamedMaterials according to requirement set R1 resp. R7 according to DIN EN 45545-2 of hazard level HL3Scope of delivery: Housing incl. hinge and fixing material

Euromas is a classic industrial enclosure made of polycarbonate.PC enclosures (also in UL 94 V0) are suitable for outdoor use (f1 listing according to UL 746C)Factory fitted round cord seal (material Neoprene CR)The cover screws, which are secured against falling out, are screwed into high-quality threaded bushingsThe housing can be mounted on the wall using the screw channels in the lower partLarge working surfaces and versatile mounting options for connectors, switches and buttonsImpact resistance IK 07 according to IEC 62262 Temperature resistance +100° CCircuit boards can be securely fastened via screw domes in the lower partScope of delivery: upper and lower part,cover screws made of V2A,self-shaping screws for the mounting cams

"The completely new, advanced enclosure concept, with modern design, offers flexible and customer-specific design options including lighting concept and future-oriented cooling in the version with an aluminium base. The enclosure can be used for applications in a hand, on a desk, on the wall or on a mast. The enclosure delivers perfect conditions for the Internet of Things or embedded systems, etc.Top with open design cover, base with cooling fins and wall tabsProtection rating: IP66/IP68 (1.2 m - 2 h) Impact resistance: IK08Temperature resistance: -25°C to 110°CColour: white, similar to RAL 9003Material: aluminium/polycarbonate"

New design and innovative features protect sensitive components even in demanding environmentsCaptive lid with smooth surfaceThanks to the integrated hinge, convenient access to the interior is ensured and wiring between assemblies in the lid and base is perfectly protected.Prepared for cost-efficient integration of pressure compensation elementsAll housing components are made of metal and thus optimally suited for use in harsh environmental conditionsNo visible housing screwsIP 66 / IP 68 (1.2 m - 2 h) / IP 69 DIN EN 60529Impact resistance IK 08 (max. IP 66 / IP 68) or IK 07 according to IEC 62262 (IP 69)Housing: GD Al Si 12, seal PU foamedMaterials according to requirement set R1 or R7 according to DIN EN 45545-2 of hazard level HL3Scope of delivery: housing incl. hinge and fixing material

Visually appealing electronics housing made of ABS with easy-to-install screw connection technology.Particularly recyclable due to the use of pure plastics without injected metal parts.The enclosures can be mounted on the wall without additional processing. For some product s, wall brackets available as accessories are required for this purpose.Fixing domes for PCBs are not only provided in the lower part, but also in the lid.Depending on the model, the lower parts are equipped with additional specially adapted fixings for mounting rails or terminal strips.Offset cams for clamping rectangular PCBsMaterial ABS, seal CRTemperature resistance +80° CColour light grey similar to RAL 7035Protection class IP65Scope of delivery: upper and lower part, self-forming steep-thread cover screws made of V2A

Euromas Alu is a particularly robust, classic industrial enclosure in cast aluminum.The foamed-in seal ensures a high degree of protection.Circuit boards and mounting rails can be mounted via pre-cut threads in the lower part.Protection class IP66 according to DIN EN 60529Impact resistance IK 09 according to IEC 62262 (A 100: IK 08)The materials comply with requirement set R1 or R7 to DIN EN 45545-2 of hazard level HL3Listing under UL File No. E 196 706Material G Al Si 12, seal PU foamedScope of delivery: upper and lower part, cover screws (V2A), 4 screws for installation/grounding

Visually appealing electronics enclosure made of ABS with easy-to-install screw connection technology.The enclosure has a recessed surface in the upper part for flush mounting of membrane keyboards.Particularly recyclable due to the use of pure plastics without injected metal parts.The enclosures can be mounted on the wall without additional processing. For some product s, wall brackets available as accessories are required for this purpose.Fixing domes for PCBs are not only provided in the lower part, but also in the lid.Depending on the model, the lower parts are equipped with additional specially adapted fixings for mounting rails or terminal strips.Offset cams for clamping rectangular PCBsMaterial ABS, seal CRTemperature resistance +80° CColour light grey similar to RAL 7035Protection class IP65Scope of delivery: upper and lower part, self-forming steep-thread cover screws made of V2A

Euromas is a classic industrial housing made of ABSFactory fitted round cord seal (material Neoprene CR)The cover screws, which are secured against falling out, are screwed into high-quality threaded bushesThe housing can be mounted on the wall using the screw channels in the bottom partLarge processing areas and versatile mounting options for connectors, switches and buttonsPrinted circuit boards can be securely fastened using screw domes in the lower part.Temperature resistance +80° CScope of delivery: upper and lower part,cover screws made of V2A,self-forming screws for the mounting cams

Design seal Protection class IP65Colour Signal red, similar to RAL 3001Application for BOP 700Material seal TPEScope of delivery: housing seal and battery compartment seal

New design and innovative features protect sensitive components even in demanding environmentsCaptive lid with recessed area for mounting input units (2mm)Thanks to the integrated hinge, convenient access to the interior is ensured and wiring between assemblies in the lid and base is perfectly protected.Prepared for cost-efficient integration of pressure compensation elementsAll housing components are made of metal and thus optimally suited for use in harsh environmental conditionsNo visible housing screwsIP 66 / IP 68 (1.2 m - 2 h) / IP 69 DIN EN 60529Impact resistance IK 08 (max. IP 66 / IP 68) or IK 07 according to IEC 62262 (IP 69)Housing: GD Al Si 12, seal PU foamedMaterials according to requirement set R1 resp. R7 according to DIN EN 45545-2 of hazard level HL3Scope of delivery: Housing incl. hinge and fixing material

isually appealing electronics enclosure made of ABS with easy-to-install screw connection technology.The enclosure has a recessed surface in the upper part for flush mounting of membrane keyboards.Particularly recyclable due to the use of pure plastics without injected metal parts.The enclosures can be mounted on the wall without additional processing. For some product s, wall brackets available as accessories are required for this purpose.Fixing domes for PCBs are not only provided in the lower part, but also in the lid.Depending on the model, the lower parts are equipped with additional specially adapted fixings for mounting rails or terminal strips.Offset cams for clamping rectangular PCBsMaterial ABS, seal CRTemperature resistance +80° CColour light grey similar to RAL 7035Protection class IP65Scope of delivery: Upper and lower part, self-forming steep-thread cover screw

Euromas is a classic industrial housing made of ABSFactory fitted round cord seal (material Neoprene CR)The cover screws, which are secured against falling out, are screwed into high-quality threaded bushesThe housing can be mounted on the wall using the screw channels in the bottom partLarge processing areas and versatile mounting options for connectors, switches and buttonsPrinted circuit boards can be securely fastened using screw domes in the lower part.Temperature resistance +80° CScope of delivery: upper and lower part,cover screws made of V2A,self-forming screws for the mounting cams

New design and innovative features protect sensitive components even in demanding environmentsCaptive lid with recessed area for mounting input units (2mm)Thanks to the integrated hinge, convenient access to the interior is ensured and wiring between assemblies in the lid and base is perfectly protected.Prepared for cost-efficient integration of pressure compensation elementsAll housing components are made of metal and thus optimally suited for use in harsh environmental conditionsNo visible housing screwsIP 66 / IP 68 (1.2 m - 2 h) / IP 69 DIN EN 60529Impact resistance IK 08 (max. IP 66 / IP 68) or IK 07 according to IEC 62262 (IP 69)Housing: GD Al Si 12, seal PU foamedMaterials according to requirement set R1 resp. R7 according to DIN EN 45545-2 of hazard level HL3Scope of delivery: Housing incl. hinge and fixing material

HousingHigh-quality, dust-proof and splash-proof housing series

Visually appealing electronics enclosure made of ABS with easy-to-install screw connection technology.The enclosure has a recessed surface in the upper part for flush mounting of membrane keyboards.Particularly recyclable due to the use of pure plastics without injected metal parts.The enclosures can be mounted on the wall without additional processing. For some product ranges, wall brackets available as accessories are required for this purpose.Fixing domes for PCBs are not only provided in the lower part, but also in the lid.Depending on the model, the lower parts are equipped with additional specially adapted fixings for mounting rails or terminal strips.Offset cams for clamping rectangular PCBsFor vertical mounting of PCBs, there are guide grooves in the lower partMaterial ABS, seal CRTemperature resistance +80° CColour light grey similar to RAL 7035Protection class IP65Scope of delivery: upper and lower part, self-forming steep-thread cover screws made of V2A

Euromas Alu is a particularly robust, classic industrial enclosure in cast aluminum.The foamed-in seal ensures a high degree of protection.Circuit boards and mounting rails can be mounted via pre-cut threads in the lower part.Protection class IP66 according to DIN EN 60529Impact resistance IK 09 according to IEC 62262 (A 100: IK 08)The materials comply with requirement set R1 or R7 to DIN EN 45545-2 of hazard level HL3Listing under UL File No. E 196 706Material G Al Si 12, seal PU foamedScope of delivery: upper and lower part, cover screws (V2A), 4 screws for installation/grounding