2154 products were found matching your search for charging in 3 shops:

Maximum performance, minimum energy consumptionAdvanced mini wireless microphoneLightweight and intuitive, compact storageSupports 4 transmitters + 8 receivers and four-channel outputAdaptive gain control for balanced volumeThree sound presets, two-level noise reductionDual-band anti-interference, lossless audio transmissionInternal dual-file 32-bit float recording Built-in time code for seamless editingExtended runtime, fast chargingIn the box2x DJI Mic 3 transmitter1x DJI Mic 3 receiver1x DJI Mic 3 charging case1x DJI Mic 3 mobile phone adapter (USB-C)1x USB-C to USB-C PD data cable1x DJI Mic 3 locking audio adapter cable (3.5 mm TRS to TRS)2x DJI Mic 3 windscreen (black/grey)2x DJI Mic 3 windscreen (black)2x DJI Mic 3 magnet2x DJI Mic 3 magnetic clip1x DJI Mic 3 carrying pouch

Charging station suitable for ProFoil foil shaver.

Oral-B iO 9, 1 pc, Magnetic Toothbrushes unisex

Zebra charging stationCharging cradle with one slot for TC22 and TC27 without power supply unit and USB cableCompatible with wrist strap and pistol gripNote:Order separately: Power supply unit (ZEBRA WUA5V12W0E), connecting cable (ZEBRA USBC2A-01)

Desktop charging station with USB-A port for Jabra Evolve2 headsets.

Universal charging cable for connection to the mobile LAPP charging station Universal (LAPP 64693) with CEE plug in blue for up to 22 kW, 3-phase with 32 A The mains adapter connects the LAPP charging station Universal for electric vehicles directly to a CEE socket - for uncomplicated charging at home or on the road. The type 2 coupling of the cable is simply connected to the car, the CEE plug to the CEE industrial sockets, e.g. in hotels, workshops and in the agricultural sector. The charging process starts and ends automatically by the on-board electronics.The mobile LAPP Mode 2 charging stations automatically recognise which plug-in charging adapter is being used and the electronics regulate the possible maximum charging power. The interchangeable LAPP plug-in charging adapters are resistance-coded and thus the possible maximum charging power is regulated by the electronics. All advantages at a glance: no setting of current or parameterisation necessary automatic termination of the charging process when the battery is fully charged Robust housing and cable that is safe to drive over Cover cap on the coupling protects against the ingress of dust, dirt and water when stored uncoupled Ambient temperature: -25° C to +45° C Detection of fault current, as well as over- and undervoltage can only be used in combination with the mobile LAPP charger Universal (LAPP 64693) Technical details: Connection 1: CEE plug rot, 5-pole 3ph/32 A Connection 2: LAPP mains adapter disconnection point Charging power: up to 22 kW Charging mode: Mode 2 Max. current carrying capacity: 32 A Rated voltage: 440 V (AC) Number of phases: 3 Inner conductor, wire cross-section: 6 mm² Cable type: smooth cable Cable sheath, material: ÖLFLEX®CHARGE Cable length: 0.96 m General Model designation: 5555923001 Operating temperature: -25 °C to 45 °C Scope of delivery: 1x LAPP adapter cable with CEE plug red and LAPP adapter plug 1x operating instructions

Charging cable Universal with CEE plug blue, up to 7.4 A, 1-phase, 32 A Universal charging cable for connection to the mobile LAPP charging station Universal (LAPP 64693) with CEE plug in blue for up to 7.4 kW, 1-phase with 32 A The mains adapter connects the LAPP charging station Universal for electric vehicles directly to a CEE socket - for uncomplicated charging at home or on the road. The type 2 coupling of the cable is simply connected to the car, the CEE plug to the CEE industrial sockets, e.g. in hotels, workshops and in the agricultural sector. The charging process starts and ends automatically by the on-board electronics.The mobile LAPP Mode 2 charging stations automatically recognise which plug-in charging adapter is being used and the electronics regulate the possible maximum charging power. The interchangeable LAPP plug-in charging adapters are resistance-coded and thus the possible maximum charging power is regulated by the electronics. All advantages at a glance: no setting of current or parameterisation necessary automatic termination of the charging process when the battery is fully charged Robust housing and cable that is safe to drive over Cover cap on the coupling protects against the ingress of dust, dirt and water when stored uncoupled Ambient temperature: -25° C to +45° C Detection of fault current, as well as over- and undervoltage can only be used in combination with the mobile LAPP charger Universal (LAPP 64693) Technical details: Connection 1: CEE plug blue, 3-pole 1ph/32 A Connection 2: LAPP mains adapter disconnection point Charging power: up to 7.4 kW Charging mode: Mode 2 Max. current carrying capacity: 32 A Rated voltage: 230 V (AC) Number of phases: 1 Inner conductor, wire cross-section: 6 mm² Cable type: smooth cable Cable sheath, material: ÖLFLEX®CHARGE Cable length: 0.96 m General Model designation: 5555923002 Operating temperature: -25 °C to 45 °C Scope of delivery: 1x LAPP adapter cable with CEE plug blue and LAPP adapter plug 1x operating instructions

Universal charging cable for connection to the mobile LAPP charging station Universal (LAPP 64693) with earthing contact plug for up to 2.3 kW, 1-phase with 10 A The mains adapter connects the LAPP charging station Universal for electric vehicles directly to an earthed socket - for uncomplicated charging at home or on the road. The cable's type 2 coupling is simply connected to the car, the angled protective contact plug to the socket. The charging process is started and ended automatically by the on-board electronics.The LAPP charging station is suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).The mobile LAPP Mode 2 charging stations automatically recognise which plug-in charging adapter is being used and the electronics regulate the possible maximum charging power. The interchangeable LAPP plug-in charging adapters are resistance-coded and thus the possible maximum charging power is regulated by the electronics. All advantages at a glance: no setting of current or parameterisation necessary automatic termination of the charging process when the battery is fully charged Robust housing and cable that is safe to drive over Cover cap on the coupling protects against ingress of dust, dirt and water when stored disconnected Ambient temperature: -25° C to +45° C Detection of fault current, as well as over- and undervoltage can only be used in combination with the mobile LAPP charger Universal (LAPP 64693) Technical details: Connection 1: Hybrid safety plug (type E/F, CEE 7/7) Connection 2: LAPP mains adapter disconnection point Charging power: up to 2.3 kW Charging mode: Mode 2 Max. current carrying capacity: 10 A Rated voltage: 230 V (AC) Number of phases: 1 Inner conductor, wire cross-section: 2.5 mm² Cable type: smooth cable Cable sheath, material: ÖLFLEX®CHARGE Cable length: 0.96 m General Model designation: 5555923000 Operating temperature: -25 °C to 45 °C Scope of delivery: 1x LAPP adapter cable with earthing contact plug and LAPP adapter plug 1x operating instructions

This 120-cm magnetic charging cable supports simple, reliable charging of all compatible Ledlenser products that have the appropriate magnetic charge system. The charging cable has a standard USB-A connector in addition to the magnetic contact.

Flexible charging station for wireless charging of an Apple Watch®.For connection to a power source with a USB port, e.g. powerbanks, notebooks, etc.Input: DC 5VOutput: 2 watts max.Supported models: Apple Watch® Series 1, 2, 3 and 4Energetic rest: The flexible charging station ChargeAIR Watch from TERRATEC turns every USB port into a wireless charging spot for the Apple Watch® within seconds. This allows the ChargeAIR Watch to be easily connected to the USB port of a powerbank, notebook or other chargers. On the way or in the office, with dimensions of only 65 x 33 x 10 mm it is the optimal charging accessory.

Mobile Charging Station Basic Type 2 32A /3-phase / 22 kW CEE industrial sockets and total length of 6 metres The LAPP Mode 2 charger with vehicle-side type 2 coupling and CEE industrial socket provides flexibility for mobile charging. The cable's type 2 coupling is simply connected to the car and the CEE plug to 3-phase CEE industrial sockets, e.g. in hotels, workshops and in the agricultural sector. The LAPP charging station is suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).However, the Basic Type 2 mobile charging station is not only suitable for practical use on the road or for emergencies. In combination with the LAPP wall bracket (LAPP 64710), it can replace the wallbox in your home. The practical storage on the wall also protects the charging station from dirt and damage.The mobile electric car charging station has an integrated control and protection device in the control box (IC-CPD), which takes over the charging control via the charging cable to the vehicle. The charging process is automatically terminated as soon as the battery is fully charged. All advantages at a glance: no need to set current or parameters automatic termination of charging when battery is fully charged practical suspension eye on the housing for easy attachment to wall brackets ergonomic design of plug and coupling robust housing and cable that is safe to drive over Protection class IP55 (connected) / IP24 (not connected) drop-proof control box / waterproof to IP67 Ambient temperature: -25° C to +45° C Detection of fault current, as well as over- and undervoltage Can also be used as a wallbox in combination with the LAPP wall bracket (LAPP 64710) (not included) Technical details: Connection 1: Type 2 coupling Connection 2: type CEE plug red, 5-poles 3ph/32 A Charging power: up to 22 kW Charging mode: Mode 2 Max. current carrying capacity: 32 A Rated voltage: 440 V (AC) Number of phases: 3 Inner conductor, wire cross-section: 6 mm² Cable type: smooth cable Cable sheath, material: ÖLFLEX®CHARGE Cable length: 6 m General Model designation: 5555921000 Operating temperature: -25 °C to 45 °C Scope of delivery: 1x LAPP mobile charging station basic with type 2 coupling (IC-CPD control box) and CEE industrial socket 1x operating instructions

charging cable type 2 for electric vehicles EV 10 m in black up to 22 kW, 32 A, 3-phase, for charging hybrid and electric cars with type 2 connection. LAPP standard charging cables type 2 connect the electric vehicle to the charging station, charging pole or wallbox - for uncomplicated charging at home or on the road. The coupling of the cable is simply connected to the electric car, the plug to the power source. The charging process is started and stopped automatically by the on-board electronics. LAPP charging cables are suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV). All advantages at a glance : Type 2 charging cable from LAPP enables easy and fast charging with up to 22 kW at a public or private charging station or wallbox. Thanks to the 3-phase connection (32 A), the cable charges particularly quickly at a nominal voltage of 440 V (AC) Highly robust, drive-over-proof cable and plug with silver-plated, corrosion-resistant plug contacts guarantee special durability Cover cap on the vehicle-side TYPE 2 coupling protects against ingress of dust, dirt and water between charges The elegant, rubberised and ergonomic handles of plug and coupling allow comfortable connection oil-resistant and longitudinally waterproof EV charging cable with high moisture protection according to protection class IP55, operating temperature -40 °C to +50 °C the electric car charging cable is space-saving to store and easy to handle thanks to its low weight The mode 3 charging cable is manufactured according to valid IEC and EN standards, compatible with European vehicles and charging stations as well as with CCS connections (Combo 2). MADE IN GERMANY : All articles are manufactured in Stuttgart with first-class materials in perfect workmanship. Technical data : Connections: Type 2 on both sides Charging mode: Mode 3 according to IEC 62196 Rated current: 32 A Rated voltage: 440 V AC 3-phase Max. Charging power: 22 kW Permissible temperature range: -40°C - +50°C Cable type: ÖLFLEX® CHARGE 5G6+1x0,5 Extension length : 10.0 metres Protection class IP55 with additional longitudinal watertightness Halogen free Flame retardant Oil resistant Weight : 4790 g Scope of delivery : Charging cable for public charging stations and wallboxes Directions for use Note : With this charging cable and the MOBILITY DOCK from LAPP, you can charge your e-mobile directly via any standard protective contact household socket. The MOBILITY DOCK is the perfect mobile wallbox for on the road.

7-port USB 3.0 hub with 2 charging ports• The USB 3.0 ports offer speeds up to 5 Gbps, 10 times as fast as USB 2.0• Having 7 slots saves you having to constantly disconnect and reconnect your USB devices• Zwei Ladeports (2,4A) zum schnellen Laden von Tablets und Smartphones• Intelligent charge current adjustmentProduct functionalityThe USB hub UH720 is ideal for adding additional USB ports to your computer. This allows you to connect up to 7 devices, such as USB data carriers, USB mice or USB printers at the same time, without having to constantly disconnect and reconnect your devices. The USB 3.0 ports support data transfer rates of up to 5 Gbps and are thus 10 times as fast as USB 2.0. With two dedicated 5 V/2.4 A charging ports, you can charge your mobile devices on the side.Fast data transfersThanks to its USB 3.0 ports, the UH720 is 10 times as fast as USB 2.0.Expansion of your USB portsThe UH720 offers you 7 additional USB ports so that you do not have to constantly connect and disconnect the USB devices on your PC.Super-fast, intelligent chargingThe two 2.4 A charging ports provide sufficient power for mobile devices such as smartphones or tablets. The intelligent charger technology detects connected devices and automatically provides the required current to charge at the greatest possible speed.Secure and reliableThe UH720 has multiple support mechanisms to prevent damage to your connected devices.

Universal charging cable for connection to the mobile LAPP charging station Universal (LAPP 64693) with CEE plug in blue for up to 11 kW, 3-phase with 16 A The mains adapter connects the LAPP charging station Universal for electric vehicles directly to a CEE socket - for uncomplicated charging at home or on the road. The type 2 coupling of the cable is simply connected to the car, the CEE plug to the CEE industrial sockets, e.g. in hotels, workshops and in the agricultural sector. The charging process starts and ends automatically by the on-board electronics.The mobile LAPP Mode 2 charging stations automatically recognise which plug-in charging adapter is being used and the electronics regulate the possible maximum charging power. The interchangeable LAPP plug-in charging adapters are resistance-coded and thus the possible maximum charging power is regulated by the electronics. All advantages at a glance: no setting of current or parameterisation necessary automatic termination of the charging process when the battery is fully charged Robust housing and cable that is safe to drive over Cover cap on the coupling protects against the ingress of dust, dirt and water when stored uncoupled Ambient temperature: -25° C to +45° C Detection of fault current, as well as over- and undervoltage can only be used in combination with the mobile LAPP charger Universal (LAPP 64693) Technical details: Connection 1: CEE plug rot, 5-pole 3ph/16 A Connection 2: LAPP mains adapter disconnection point Charging power: up to 11 kW Charging mode: Mode 2 Max. current carrying capacity: 16 A Rated voltage: 440 V (AC) Number of phases: 3 Inner conductor, wire cross-section: 2.5 mm² Cable type: smooth cable Cable sheath, material: ÖLFLEX®CHARGE Cable length: 0.96 m General Model designation: 5555923003 Operating temperature: -25 °C to 45 °C Scope of delivery: 1x LAPP adapter cable with CEE plug red and LAPP adapter plug 1x operating instructions

Mobile Charging Station Basic Type 2 16A /3-phase / 11 kW CEE industrial socket and total length of 6 metres The LAPP Mode 2 charger with vehicle-side type 2 coupling and CEE industrial sockets provides flexibility for mobile charging. The cable's type 2 coupling is simply connected to the car and the CEE plug to 3-phase CEE industrial sockets, e.g. in hotels, workshops and in the agricultural sector. The LAPP charging station is suitable for plug-in hybrid (PHEV) and battery electric vehicles (BEV).However, the Basic Type 2 mobile charging station is not only suitable for practical use on the road or for emergencies. In combination with the LAPP wall bracket (LAPP 64710), it can replace the wallbox in your home. The practical storage on the wall also protects the charging station from dirt and damage.The mobile electric car charging station has an integrated control and protection device in the control box (IC-CPD), which takes over the charging control via the charging cable to the vehicle. The charging process is automatically terminated as soon as the battery is fully charged. All advantages at a glance: no need to set current or parameters automatic termination of charging when battery is fully charged practical suspension eye on the housing for easy attachment to wall brackets ergonomic design of plug and coupling robust housing and cable that is safe to drive over Protection class IP55 (connected) / IP24 (not connected) drop-proof control box / waterproof to IP67 Ambient temperature: -25° C to +45° C Detection of fault current, as well as over- and undervoltage Can also be used as a wallbox in combination with the LAPP wall bracket (LAPP 64710) (not included) Technical details: Connection 1: Type 2 coupling Connection 2: type CEE industrial socket, 5-poles 3ph/16 A Charging power: up to 11 kW Charging mode: Mode 2 Max. current carrying capacity: 16 A Rated voltage: 440 V (AC) Number of phases: 3 Inner conductor, wire cross-section: 2.5 mm² Cable type: smooth cable Cable sheath, material: ÖLFLEX®CHARGE Cable length: 6 m General Model designation: 5555921007 Operating temperature: -25 °C to 45 °C Scope of delivery: 1x LAPP mobile charging station basic with type 2 coupling (IC-CPD control box) and CEE industrial socket 1x operating instructions

Charge and display your DualSense wireless controllers with the officially licensed Twin charging station for PlayStation 5. Charging two controllers at the same time is simple: Simply position your DualSense controllers on the designated areas and click them into place. Once the controllers are fully charged, you can disconnect the contact by clicking down again and then get your game on - or simply leave your controllers in the station for an ideal, attractive storage solution. This means that your controllers are next to your PS5 console ready for your next gaming session, while looking great and charging up.Charges two wireless DualSense controllersTo charge, click the controllers into placeCharging with stylePower supply via AC power supply unitOfficially licensed for PlayStation

Wall mount for the Mobile LAPP charging stationWith our wall mount you can turn your mobile charging station into a wallbox light, which offers a charging power of up to 11 kW and is installed in no time at all.To ensure that the mobile charging station for your electric car is always securely secured, mount the wall bracket in a garage, underground car park, in a carport or on an outdoor parking space. You can install it yourself in just a few minutes with just three screws.After mounting the wall mount, simply insert the mobile charging station and connect directly to the mains via a socket to charge your electric car. A control and protection device is integrated in the controller box (IC-CPD) of the charging cable, which takes over the charging control via the truck cable to the truck. When the charging process is complete, the mobile charging station stops automatically and you can disconnect the plug. Optionally, you can also secure the charging station with a lock against theft. If the mobile charging station is needed on the move, it can be removed again with a simple handle and stored in the boot. This gives you the security of being able to charge from a simple household or industrial socket while on the move and is therefore not dependent on finding a charging column.Features: quick and easy to attachNo electrical installation necessaryIntuitive installation of the mobile charging stationLockable by fitting a lock (not included)simply removable againPlugs and screws includedHigh quality powder coatingMade in Germany

Officially licensed by Xbox, the PowerA Duo charging station eliminates the cost of replacement batteries. The charging station is compatible with current Xbox Series X S controllers and Xbox One wireless controllers. Each charging station provides a reliable charging solution and comes with four charge-thru battery doors-two for Xbox Series X S controllers and two for Xbox One controllers-and two rechargeable battery packs. Focus on the game, not on the charge. Get ready for hours of gaming fun.Includes two rechargeable batteries and four charge-thru battery doors (two for Xbox X S, two for Xbox One)Charges via power supply cable, keeps USB ports freeLEDs indicate the charging statusOfficially licensed by Xbox for Xbox Series X S and compatible with Xbox One

The Speedphone 12 is optimised for use on Speedport routers with a DECT-CAT-iq (2.0) base, such as Speedport Smart or Speedport Pro, in combination with an IP-based connection.Can be set up wherever you want it, no cable connection to the Speedport necessaryEasy commissioning thanks to the initial installation wizardHigh voice quality - full, clear and natural sound during phone callsClear design - ergonomic form and intuitive button layout with multi-function buttonClear colour display and simple user interfaceFeatures: Display: TFT 5 cm (2 in) diagonal, resolution 220 x 176 pixelsTelephone book: up to 100 entries stored locally and access to the telephone book on the SpeedportTalk time: up to 20 hrs.Standby time: up to 200 hrs.Range: up to 50 m inside, up to 300 m outsideHandset hands-free: in HD qualityBaby/room monitoringCall/redial list available depending on the SpeedportAutomatic transmission power adjustmentMax. 5 Speedphones can be registered to the SpeedportIlluminated keyboardReminder and alarm clock functionCall/redial listBattery: 2 x AAA NiMH

Compact charging adapter for the Apple Watch with USB-C connection for direct connection to laptops, tablets and moreCompatible with Apple Watch series 1, 2, 3, 4 and 5 Made of aluminiumMFI-certifiedPower: 5 WWith the USB-C magnetic charging dock for the Apple Watch, the Apple Watch can now be charged anywhere and in no time at all. The compact charging adapter is MFi certified and compatible with the Apple Watch series 1, 2, 3, 4 and 5. The charging dock easily connects to your laptop, tablet, or other USB-C-connected devices with the USB-C connector, and then charges the Apple Watch via induction. The charging station's incredibly compact design makes it easy to take it with you wherever you go. The station is therefore perfect for travelling. Visually, the aluminium charging dock in Space Grey is a perfect fit with the aesthetics of Apple products.