3077 products were found matching your search for conductors in 1 shops:

Connection terminals for all types of conductors. Can be used for fine-stranded conductors with a cross-section of between 0.14 mm² and 4 mm² and single-stranded and multi-stranded conductors with a cross-section of between 0.2 mm² and 4 mm².• 2-conductor terminal• Suitable for all types of conductors• Visual control thanks to the transparent housing• Two test ports

Speaker cable CCA conductor, 2x2.5 mm², red/black, 100 m reel2 x 2.5 mm² = 2 x 50 x 0.25 mm3.8 x 7.8 mmPVC

Protects against contact with a stripped live conductor (max. Ø 10 mm) solid plastic

Connection terminals for all types of conductors. Can be used for fine-stranded conductors with a cross-section of between 0.14 mm² and 4 mm² and single-stranded and multi-stranded conductors with a cross-section of between 0.2 mm² and 4 mm².• 3-conductor terminal• Suitable for all types of conductors• Visual control thanks to the transparent housing• Two test ports

Speaker cable CCA conductor, 2x1.5 mm², transparent, 100 m reel2 x 1.5 mm² = 2 x 30 x 0.25 mm2.9 x 5.9 mmPVC

SONOFF MINI DUO-L 2-fold Zigbee intelligent switch MINI-ZB2GS-LMINI DUO-L (MINI-ZB2GS-L) is a 2-gang Zigbee smart switch with a compact design that fits into European 60s and other small junction boxes. Installation without a neutral wire makes retrofitting in older buildings easy. The switch offers two independent control channels with a total load capacity of 12A. With the Zigbee 3.0 protocol, it works with various open source platforms for cross-device automation. You can control it via the app, voice command or set timers for automatic operation.Zigbee protocolBased on the Zigbee 3.0 protocol, it works seamlessly with a variety of open-source third-party platforms and offers effortless integration into your smart home system.No neutral wire requiredAdapts to one-wire installations in older homes and allows for direct installation without circuit modifications. It is a practical solution for effortless modernization of outdated home wiring.Dual channel controlFeatures two independent channels with a total load of up to 12A, allowing control of two devices in either direction for flexible and seamless lighting control across multiple floors.Intelligent upgradeUpgrades traditional switches with smart features, enabling app or voice control and effortless timer settings for convenient, automated home control.Compact designWith a space-saving design, it can be easily installed in various narrow wall-mounted junction boxes, including the standard European junction box 60.A time and labor saver3W load intelligent control, easy to install - no additional anti-flicker module required.Disconnect relay, turn switches into smart triggersActivate the decoupling relay to effortlessly separate the operation of external switches from the control of smart devices. Turn your physical switch buttons into smart triggers for lighting scenes - an ideal solution for smart light bulbs.

Speaker cable CCA conductor, 2x0.75 mm², red/black, 25 m ring2 x 0.75 mm² = 2 x 24 x 0.20 mm2.2 x 4.8 mmPVC

Speaker cable CCA conductor, 2x2.5 mm², transparent, 100 m reel2 x 2.5 mm² = 2 x 50 x 0.25 mm3.8 x 7.8 mmPVC

Speaker cable CCA conductor, 2x2.5 mm², red/black, 25 m ring2 x 2.5 mm² = 2 x 50 x 0.25 mm3.8 x 7.8 mmPVC

Speaker cable CCA conductor, 2x4.0 mm², white, 30 m ring2 x 4.0 mm² = 2 x 81 x 0.25 mm4.4 x 8.7 mmPVC

Modular individual terminals with horizontal conductor insertion- Intuitive process for snapping individual terminals to terminal strips - The CAGE CLAMP technology guarantees fast and reliable connection of all conductor types in a manner that is resistant to vibration and requires no maintenance- Bridges provided by means of insertable jumpers- Mounting via side mounting flange (hole diameter: 3.2 mm)- Mounting via snap-in feet on the bottom (thickness: 0.6 - 1.2 mm, mounting hole: 3.5 mm)- Optional mounting on TS35 using the mounting base- Conductor cross section: 0.08 - 2.5 mm²- Rated voltage: 500 V- Surge voltage: 6 kV- Nominal current: 24 A- Terminal width: 6 mm

TOPJOB® S — The range of terminal blocks for industrial and explosive applications as well as for facilities installation. The TOPJOB® S terminal blocks are the smallest for blocks on the market for 35 DIN rails, thanks to CAGE CLAMP® S technology.

3-conductor through terminal block with lever and Push-in CAGE CLAMP® 2.5 mm², gray

WAGO connector for printed circuit boards- Compact 2-conductor pillar terminal block with PUSH WIRE technology- Easy to operate using a screwdriver- Single-stranded conductors and fine-stranded conductors equipped with bootlace ferrules can be plugged in directly- 2-wire connection for power supply and distribution of potentials- Quick and simple process for replacing PCBs without interrupting ground potentials- Terminal block for attaching to solder pinsSeries 252: - Spacing: 3.5 mm- Conductor cross section: 2 x 0.4 - 0.8 mm²- Rated voltage: 320 V- Surge voltage: 4 KV- Nominal current: 2 A

TOPJOB® S — The range of terminal blocks for industrial and explosive applications as well as for facilities installation. The TOPJOB® S terminal blocks are the smallest for blocks on the market for 35 DIN rails, thanks to CAGE CLAMP® S technology.

3-conductor through terminal block with lever and Push-in CAGE CLAMP® 16 mm², blue

Universal connection for all conductor typesDirect insertion of single-wire conductors and fine-stranded conductors with bootlace ferruleSimple, intuitive operation without the need for special toolsFor wiring with the female multi-point connector mated or unmatedTesting port parallel to conductor entryFactory-fitted solder pins for straight or angled insertion in relation to the PCB

746-series PCB terminal block with 7.5-mm spacingWith our PCB terminal blocks you get a connector system that can be used in many ways: as PCB connectors, as feed-through connectors, as flying connectors for various mounting types or as connectors on terminal blocks. A stripping length of 13 to 15 mm is required for connecting conductors to this PCB terminal block. This product uses push-in CAGE CLAMP® technology. Push-in CAGE CLAMP® technology is the maintenance-free universal connection solution for all types of conductors with the added benefit of direct insertion (push-in). Both rigid and fine-stranded conductors with bootlace ferrules can be inserted directly without the need for tools. Preparation of the conductors, such as crimping the bootlace ferrules, is not necessary. Depending on the type of conductor, this PCB terminal block is suitable for conductor cross-sections of 0.5 to 10 mm². Tin was used for the contact surface. This PCB terminal block is actuated using an operating tool. The PCB terminal block is soldered to the PCB using THT. The conductor is inserted at a 45° angle to the surface.

3-conductor through terminal block with push-button 2.5 mm², gray

Universal connection for all conductor typesDirect insertion of single-wire conductors and fine-stranded conductors with bootlace ferruleSimple, intuitive operation without the need for special toolsFor wiring with the female multi-point connector mated or unmatedTesting port parallel to conductor entryFactory-fitted solder pins for straight or angled insertion in relation to the PCB