833 products were found matching your search for detector in 2 shops:

"Instantly verify banknotes at any locationIn just two seconds, the Safescan 30 counterfeit currency detector pen will tell you whether a banknote is fake or genuine. Simply mark the banknote and watch: if the ink turns dark, the note is likely a counterfeit. Perfect wherever you need fast, portable verification, such as at markets and events or in taxis and delivery vans.Special in works on all paper banknotesThe iodine-based ink in the Safescan 30 reacts with a starch found in all standard papers, but not in the official cotton-based banknote paper used by central banks worldwide. What's more, it helps take fake money out of circulation: the pale ink will fade away on genuine banknotes, but leave a permanent purple mark on suspected counterfeits.Specifications:Immediate verificationSuitable for testing all paper currenciesNot suitable for the new polymer banknotesSize: 13.5 x 1.5 x 1 cmWeight: 9 grIn the Box1x Safescan 30"

Antje, the LED pedestal light made of stainless steel, with motion detector function Antje is very useful for outdoor areas and has increased functionality with the motion detector and solar technology. The solar panel on the top of the head captures the sun's rays during the day and converts their energy into electricity, which is then available for the LED lighting after dark. This means that no power connection is required for the outdoor lighting and that you are relatively independent when installing the LED solar pedestal light. The presence detector ensures that the brightness increases to full power when someone walks past the light and needs its light. Otherwise, it has a basic brightness of 75 lumens at night to provide a pleasant orientation light. The lighting duration at full brightness is approximately 25 seconds, the detection angle is 90 degrees and the range is between 2 and 6 metres. With its stainless steel design, the LED pedestal light has a very modern look. The light from the LEDs is directed downwards, where it hits the reflective surface of a reflector and its effect is intensified.

The sensor success story. Still looks as stunning as ever. Are you looking for a way to enter the world of motion detectors? The IS 130-2 infrared motion detector is a STEINEL customer favourite of recent years, not meaning that we're resting on our laurels. We've continued to optimise both its design and technology. The sensor classic is the ideal solution for monitoring areas with precision targeting in front of buildings and on driveways. It also provides excellent quality of detection and can be tailored to the specific conditions on site. The motion detector is wired up so easily and quickly, your neighbour won't even notice you installing it.

"A breeze. Get started with the classic.Are you thinking about installing a motion detector on your building? The IS 140-2 infrared controlled motion detector offers you all the advantages of a modern detector. Of course, we always use the latest technology for our long-standing favourites. In this generation, we have equipped the product with even more class: a larger adjustment angle, even greater range and even better detection. Get intelligent sensor technology for your home. Infrared motion detector with 140° detection angle and up to 14 m detection range For wall or corner mounting (with optional corner wall bracket) indoors and outdoors (IP 54), ideal for targeted detection around the house Made of UV-resistant plastic for a long service life Sensor can be swivelled horizontally by 180° and vertically by 90°, including cover plates for precise adjustment of the detection area Stepless adjustment of time (8 sec. - 35 min.) and switch-on brightness (2 - 2000 lux) Reliably switches any illuminant with a total max. 1000 W switching load, connection of up to 6 LEDs possible Includes assembly accessories - plastic-free packaging"

"A breeze. Get started with the classic.Are you thinking about installing a motion detector on your building? The IS 140-2 infrared controlled motion detector offers you all the advantages of a modern detector. Of course, we always use the latest technology for our long-standing favourites. In this generation, we have equipped the product with even more class: a larger adjustment angle, even greater range and even better detection. Get intelligent sensor technology for your home. Infrared motion detector with 140° detection angle and up to 14 m detection range For wall or corner mounting (with optional corner wall bracket) indoors and outdoors (IP 54), ideal for targeted detection around the house Made of UV-resistant plastic for a long service life Sensor can be swivelled horizontally by 180° and vertically by 90°, including cover plates for precise adjustment of the detection area Stepless adjustment of time (8 sec. - 35 min.) and switch-on brightness (2 - 2000 lux) Reliably switches any illuminant with a total max. 1000 W switching load, connection of up to 6 LEDs possible Includes assembly accessories - plastic-free packaging"

"FireAngel carbon monoxide detector FA-3313-EUX10 with replaceable 1.5 V AA batteriesPowerful electrochemical CO sensor (10 years lifetime) Replaceable 1.5 V AA batteries (included)Mute and test function Audible and visual alarm indication Built-in loud buzzer: 85 dB (A) at 3 mThe FireAngel Carbon Monoxide Detector FA-3313-EUX10 with replaceable 1.5 V AA batteries detects and recognizes even very small amounts of carbon monoxide in the ambient air. Response thresholds according to EN 50291 in ppm = parts per million50 ppm triggering after 60-90 min.100 ppm triggering after 10-40 min. 300 ppm triggering Technical data:Sensor type: electrochemicalResponse thresholds according to EN 50291 Audible and visual alarmAlarm volume: over 85 dB (A) at 3 mPower source: replaceable 1.5 V AA batteries Installation: wall mountingOperating temperature: -10°C to +40°CMaterial: PC + ABSdimensions: 119 x 62 x 38 mmWeight: 128 gramsCertification: EN 50291- 1 and EN50291-2, CE certified "

"10 Year Smoke Alarm - Optical, Replaceable 3 Year Battery, Escape LightThe FireAngel FA-6111-INT optical smoke alarm with flood light has replaceable batteries that last approximately 3 years. In case of emergency, the smoke alarm alerts all occupants in time so that there is enough time to get to safety. With the LED escape light, corridors and escape routes are illuminated for better orientation in the event of an alarm.Escape light- an extra bright light to illuminate the escape route.Battery operated optical smoke detectorReduces false alarmsLarge central test buttonSleep Easy - mutes the beep for 8 hours when the battery is lowLow battery warning - ""beeps"" approximately every 40 seconds when battery needs to be replacedLoud 85 decibel alarmSuitable for recreational accommodation vehiclesEasy installation - mounting hardware includedQuiet test function supports discreet testing at lower volume compared to standard alarms"

"FireAngel Carbon Monoxide Detector FA-3322-EUX10 with Color LCD Displaypowerful electrochemical CO sensor (10 years lifetime) low power consumption, 10 years battery life additional temperature display additional humidity sensor Mute and test function Acoustic and visual alarm indication built-in loud alarm: 85 dB (A) at 3 mVisualized plain text displays Color LCD display The FireAngel Carbon Monoxide Detector FA-3322-EUX10 with color LCD display detects and recognizes even very small amounts of carbon monoxide in the ambient air. Response thresholds according to EN 50291 in ppm = parts per million50 ppm triggering after 60-90 min.100 ppm triggering after 10-40 min. 300 ppm triggering Technical data:Sensor type: electrochemicalResponse thresholds according to EN 50291 Acoustic and optical alarm indication Alarm volume: 85 dB (A) at 3 mColor LCD display Battery life: 10 yearsPermanently sealed lithium battery Installation: wall mountingOperating temperature: -10°C to +40°CMaterial: PC + ABSDimensions: 129 x 76 x 31 mmWeight: 121 gramsCertification: EN 50291- 1 and EN50291-2, CE certified "

"FireAngel carbon monoxide detector FA-3820 -EUX10 with fixed 10 year batteryPowerful electrochemical CO sensor (10 years lifetime) Low power consumption, 10 years battery life Mute and test function Audible and visual alarm indication Built-in loud alarm generator: 85 dB (A) at 3 mLED indicators for alarm / fault and operation. Carbon monoxide is a dangerous respiratory poison and is produced by the incomplete combustion of fossil fuels such as oil, gas, wood, coal pallets, etc. The CO detector provides early warning of CO poisoning and triggers a loud audible and visual alarm. The response thresholds for CO detectors are defined and prescribed in EN standard 50291. Response thresholds according to EN 50291 in ppm = parts per million50 ppm Triggering after 60-90 min.100 ppm triggering after 10-40 min. 300 ppm trip Technical data:Sensor type: electrochemicalResponse thresholds according to EN 50291 Acoustic and optical alarm indication Alarm volume: 85 dB (A) at 3 mBattery life: 10 yearsPermanently sealed lithium battery Installation: wall mountingOperating temperature: -10°C to +40°CMaterial: PC + ABSDimensions: 125 x 67 x 33 mmWeight: 95 gramsCertification: EN 50291- 1 and EN50291-2, CE certified "

"10-year smoke alarm - Optical, sealed lithium batteryThe FireAngel FA-6120-INT battery-powered smoke alarm is quick and convenient to install. The installation material for the optical smoke alarm is included.Under normal operating conditions, the smoke detector is functional for 10 years. You should replace the smoke detector after that to ensure continuous protection of your home.Battery operated optical smoke detectorReduces false alarmsLarge central test buttonSleep Easy - mutes the beep when the battery is low for 8 hoursLow battery warning - .beeps. approximately every 40 seconds when battery needs to be replacedLoud 85 decibel alarmSuitable for recreational vehiclesEasy installation - mounting hardware includedQuiet test feature allows discreet testing at lower volume compared to standard alarms"

"The FireAngel ST-630-DE P-Line with the Thermoptek technology detects both slow smouldering fires and fast fires with a fast reaction time. The ST-630 can be equipped with a W2 radio module (optional, see accessories). ST-630s equipped with this accessory can be operated with 2 to 50 units networked together. Smoke detector has a powerful permanently sealed Panasonic 10-year battery. Thermoptek sensor technology: The technically advanced combined thermo-optical detection method ensures fast detection of both smouldering fires and fast-burning flames.Wireless interface for mounting the W2 wireless module.Includes a non-removable, integrated lithium battery with a 10-year service life under normal operating conditions.Two additional thermal sensors.Integrated, readable event memory.Self-monitoring with fault indicator.Separate yellow fault LED.Optional anti-theft protection.Easy to set up a wireless connection."

"10 years of safety without changing the batteryThe new Q2 smoke detector from world market leader Kidde with a 10-year manufacturer warranty (US product liability) is VdS-certified and carries the coveted Q label for sustained operation — proven in demanding additional tests. New features include an event memory and contamination compensation, which reduces nuisance alarms to a bare minimum by automatically adjusting the sensitivity of the sensor.These quality criteria ensure that the microprocessor-controlled Q2 smoke detector provides fault-free operation over the entire 10-year period.Q label certifiedCompact, discreet and unobtrusiveMulti-function button for low-noise detector test and alarm stopAutomatic detector activation during initial assemblyIncludes anti-tamper protection"

Modern look meet innovative technology.The IS 180 digi presents itself in a flat, straight design and boasts a subtle lens. Thanks to the perfect integration of the lens into the housing, the IS 180 digital appears particularly elegant and inconspicuous as compared to the conventional infrared sensors - and thus always inserts itself optimally into the respective environment. Even the inner values are impressive. With the IS 180 digi, we have achieved a real breakthrough in terms of infrared sensor technology. Radial movements can now be detected much more precisely with the 180-degree sensor. And the once time-consuming sensor area limit is faster and easier than ever thanks to the digital and zone-for-zone approach. The sensitivity is also digitally adjustable for each of the three zones.

Modern look meet innovative technology.The IS 180 digi presents itself in a flat, straight design and boasts a subtle lens. Thanks to the perfect integration of the lens into the housing, the IS 180 digital appears particularly elegant and inconspicuous as compared to the conventional infrared sensors - and thus always inserts itself optimally into the respective environment. Even the inner values are impressive. With the IS 180 digi, we have achieved a real breakthrough in terms of infrared sensor technology. Radial movements can now be detected much more precisely with the 180-degree sensor. And the once time-consuming sensor area limit is faster and easier than ever thanks to the digital and zone-for-zone approach.

"FireAngel Smoke & Carbon Monoxide Alarm FA-SCB10-INT1 warning detector against 2 deadly hazards: advanced optical smoke sensor to minimize false alarms innovative electrochemical carbon monoxide sensor for better detection of CO, both sensors work independently of each otherloud alarm generator 85 dB-ASealed 3V lithium battery with 10 year lifetimelarge test & mute buttonThe FireAngel FA-SCB10-INT Combined Smoke & Carbon Monoxide Alarm is an easy-to-install combination detector designed to protect occupants from fire and CO. It is ideal for protection in bedrooms and living areas. The device has both smoke and carbon monoxide sensors to detect both hazards. It has clear indicators and warnings so you can see which hazard is acute when the alarm sounds. The smoke & carbon monoxide detector has a sealed 3V lithium battery with a 10 year life.Dimension: 134mm (diameter) x 39.4mm depthBattery: Sealed 3V lithium battery 10 years lifetimeTechnology: Optical (smoke), electrochemical (carbon monoxide- CO)Alarm sound level: 85dB(A) at 3m (minimum)Installation: ceiling/wallOperating temperature: 0°C to +40°CMaterial: ABS, UL94 VO fire retardantManufacturer warranty: 3 yearsWeight: 0,200 kgCertified according to: EN14604:2005+AC:2008 / EN 50291-1:2018"

Sync Alarm PIR motion detectorTamper-proof motion detectionTriggers your alarm and notifies you immediately if movement is detected within a large range of 12 metres and 110 degrees.Instant notificationsGet notified in your Yale app if there is movement in the apartment when the alarm system is activated.Simple set-up and installationThe connection to your Yale Sync Smart Home alarm system is available immediately after unpacking, so you can customise your system with 40 accessories. Easy installation on walls and corners, without the need for tools.Cordless range of up to 200 mProtect your garage and outbuildings with our 200-m wireless range.Secure encryptionThe latest technology to keep your home safe and protected.Intelligent alerts with the Yale Home appThere are no monthly fees or subscriptions to the Yale Home app. You can activate, deactivate, partially activate and check your alarm status via the app.

Targeted coverage around the house. IS 130-2 infrared motion detector, for outdoors and indoors, ideal for the targeted coverage at home, 130° coverage angle, with a range of up to 12 m, adjustable time and twilight threshold, sensor pivots horizontally by 50° and vertically by 90° to be precisely adjusted to suit the coverage area.Dimensions (H x W x D): 130 x 78 x 84 mmPassive infrared sensorCan be used indoors and outdoorsInstallation: wallMax. power (resistive load, e.g. conventional lamp) 600 WMax. power (uncompensated, inductive, cos ? = 0.5, e.g. fluorescent lamps) 500 WMax. power (electronic ballast, capacitive, e.g. energy saving lamps) max. 4 St., C? 88 µFMains connection 230–240 V, 50 HzAngle of coverage 130° with creep zone protectionSegmental coverage suppression possible yesHorizontal swivel range 50°Vertical swivel range 90°Range: max. 12 mResponse brightness 2–2000 lxTime setting 8 s to 35 min.Protection class (IP): IP54Protection class II

Homeowners' favourite. IS180-2 infrared motion detector, for outdoors and indoors, ideal for large house fronts and entrances, corner mounting with corner wall bracket possible, 180° coverage angle, range adjustable up to 12 m or up to 5 m, adjustable time and twilight threshold, coverage range can be limited by covers.Dimensions (H x W x D): 120 x 76 x 56 mmPassive infrared sensorCan be used indoors and outdoorsInstallation: wall, cornerMax. power (resistive load, e.g. conventional lamp) 1000 WMax. power (uncompensated, inductive, cos ? = 0.5, e.g. fluorescent lamps) 500 WMax. power (electronic ballast, capacitive, e.g. energy saving lamps) max. 6 St., C? 132 µFMains connection 230–240 V, 50 HzCoverage angle 180° with 90° opening angleSegmental coverage suppression possible yesRange: max. 12 m (temperature-stabilised)Response brightness 2–2000 lxTime setting 10 s to 15 min.Protection class (IP): IP54Protection class IIIncluding corner wall bracket for outdoor and indoor corner installation

"Smoke alarm RM250Smartwares RM250 smoke detector allows you to act in time in case of fire. The sensor of the smoke detector has a service life of 10 years, the supplied battery of 1 year. With the 85 dB loud alarm sound, you can avoid life-threatening situations.Protect yourself and your family by acting quickly in case of fireSensor with 10 years lifetimeSmoke detector with convenient test buttonA battery warning tells when the battery needs to be changedEasy to install and cleanA smoke alarm saves livesA fire can break out at any time, even when you are asleep. The toxic gas can cause you to pass out and not wake up. However, if a fire breaks out, it is important to wake up in time. A smoke alarm will warn you in time, so you can quickly respond to life-threatening situations. It should be taken into account that smoke alarms have a maximum lifespan of 10 years. Therefore, always check the date of your smoke alarm and buy a new device every 10 years. This is the only way to ensure that your smoke alarms are working correctly.Choose the right smoke alarmAll Smartwares smoke alarms are equipped with optical sensors. An optical sensor responds quickly to a glowing fire, triggers significantly fewer false alarms, and is environmentally friendly. The RM250 smoke detector's battery has a 1-year life span and the sensor lasts for a maximum of 10 years. The battery warning beeps when the battery needs to be changed. The smoke detector has a silence button that can be used to silence a suspected false alarm.MountingTo be reliably warned when a fire breaks out, you should install at least one smoke detector on each floor. It is advisable to mount the smoke detectors in the places you pass when escaping, for example, in the reception hall or stairwell. Since smoke rises upwards, the smoke detector must always be mounted on the ceiling, which is not a problem with a few screws or a mounting plate. Smartwares smoke detectors work wirelessly, so you can mount them anywhere in your home. Thanks to the locking pin, you can mount the smoke detector only when the battery is inserted.MaintenanceThe functionality of the smoke detector may decrease due to dust and dirt. It is therefore important to wipe the smoke detector with a slightly damp cloth once a month and vacuum it twice a year. Do not use any cleaning products and do not paint the smoke detector with paint.Test smoke alarmsYou should test your smoke alarm regularly using the test button. The smoke detector should be tested once in a moment to make sure it works well in case of fire. When the battery power decreases, a short beep will sound to indicate that the battery...

"Smoke alarm RM250/4 pack of 4With the Smartwares RM250 smoke alarm, you can act in time in case of fire. The smoke alarm comes with a 5-year battery. With the 85 dB loud alarm sound, you can avoid life-threatening situations.Protect yourself and your family by acting quickly in case of fireLoud alarm with 85 dBThe smoke detector has a convenient test buttonA battery warning tells when the battery needs to be changedEasy to install and cleanA smoke alarm can save livesA fire can break out at any time, even when you are asleep. The toxic gas can cause you to pass out and not wake up. But if a fire breaks out, you should definitely wake up in time. A smoke alarm will warn you in time, so you can quickly respond to life-threatening situations. It is important to know that smoke alarms have a maximum life of 10 years after activation due to dust accumulation. Therefore, always check the date of your smoke alarm and buy a new device every 10 years to ensure proper operation.Choose the right smoke detectorAll Smartwares smoke alarms are equipped with an optical sensor. An optical sensor responds quickly to a glowing fire, triggers significantly fewer false alarms, and is environmentally friendly. The RM250 smoke detector's battery has a 5 year life span and the sensor lasts for a maximum of 10 years. The battery warning beeps when the battery needs to be changed. The smoke detector has a silence button that can be used to silence false alarms.MountingTo be reliably warned when a fire breaks out, you should install at least one smoke alarm on each floor. It is advisable to mount the smoke detectors in the places you pass when fleeing, e.g. in the hallway or stairwell. Since smoke rises upward, the smoke detector must always be mounted on the ceiling. With a few screws or a retaining plate, this is quite simple. Smartwares smoke alarms work wirelessly, so you can mount them anywhere in your home. Thanks to the locking pin, you can only mount the smoke alarm when the battery is inserted.MaintenanceThe functionality of the smoke detector may decrease due to dust and dirt. It is therefore important to wipe the smoke detector with a slightly damp cloth once a month and vacuum it twice a year. Do not use any cleaning products and do not paint the smoke detector.Test your smoke detectorsIt is important to test your detector regularly using the test button. The smoke detector should be tested once in a moment to make sure it works well in case of fire. When the battery power decreases, a short beep will sound to indicate that the battery needs to be replaced.Scope of supply:4x smoke...