870 products were found matching your search for drill in 1 shops:

"edding 8850 drill hole marker - easy marking of hard-to-reach areasSometimes marking boreholes is really annoying, especially when other objects block access and make it impossible to reach the right places. Fortunately, the edding 8850 borehole marker is equipped with an extra-long, fine tip that releases its waterproof black ink for precise, permanent markings. No wonder that it is used by both carpenters and ambitious do-it-yourselfers.The quick-drying, wipe-resistant edding is suitable for almost all dry and dust-free surfaces. With its robust, long metal tip, it is the best tool for marking the right spot to build stable and durable buildings - for professionals and DIY enthusiasts alike.Description:Drill hole marker for permanent marking in hard-to-reach areas on almost all dust-free materials, e.g. metal, stone, glass, wood, plasticWith its long and narrow mouthpiece (20 mm), the pin is particularly suitable as a mounting aid in places that are difficult to access, e.g. drill holes when mounting shelves.The bullet tip has a line width of 1 mmThe quick-drying ink is water and smudge-proofCharacteristics Shape of the tip: bullet tipLine width: 1 mmpermanentlow odourwaterproofsmudge-prooffast-dryingCap reversiblewith cliphas a roll stop"

"Hammer drill for a wide range of applications in the home and workshop.Keyless double sleeve chuck makes changing drill bits quick and easy Bosch Electronic Speed Control for speed control during drillingCompact, lightweight and ergonomic for comfortable operationEffortless drilling in masonry up to 13 mm and wood up to 25 mmIncluded in delivery EasyImpact 600 hammer drill Auxiliary handle Depth stopDelivered in a box"

Drilling and milling unit Micromot 60/E for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing.Voltage supply: 12 V by Proxxon power supply unit 28704/28706Idle speed: adjustable from 5000 - 20,000 rpm with Proxxon power supply unit

Drilling and milling unit Micromot 60 for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing.Voltage supply: 12 VIdle speed: 20,000 rpmExtremely easy to manage with a diameter of only 35 mm. As well as a low weight (approx. 230 g), this product features a pleasant singing sound and free running due to the balanced motor with a ground, ball bearing spindle. Thanks to high-quality MICROMOT steel collets, even the smallest shafts are tensioned completely concentrically. Application tools do not rattle and knock around. Like all machines of this size, they are powered by a low-voltage safety voltage. A power supply unit with a minimum output of 1.0 A is required for operation. We recommend MICROMOT power supply units

For drilling, milling, grinding, polishing, cleaning, cutting, engraving and signing. For precision mechanics, model builders, jewellers, opticians, artists and craftsmen, and electronics engineers.• Ball bearing spindle made of ground steel. With lock button for tool changes.• Quiet, powerful 100 W motor. Controlled with full wave electronics of 5000 - 20,000 rpm.• Slim housing head made of die-cast aluminium. For precise ball bearing fits. More stability under extreme loads.• Uncompromising safety with protective isolation according to class 2.• With 34 application tools in industrial quality. All shafts Ø 2.35 mm. Complete with six triple slit steel collets from 1.0 to 3.2 mm.• High concentricity (max. 3/100 mm).• Application tools do not rattle and knock around.• With 20-mm MICROMOT front system fit for use in drilling and horizontal stands. In plastic case with 34 application tools.High-speed with a balanced DC special motor. Infinitely adjustable electronic speed regulator (full-wave electronics). Ball bearing precision shaft made of ground steel. With 6 triple slit MICROMOT steel collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm including clamping nut).Technical data:• Speed: 5000 - 20,000 rpm.• Power consumption: max. 100 W• Voltage: 220 - 240 V.• Stable gear head made of die-cast aluminium.• Main housing: glass-fibre-reinforced polyamide with soft component in the grip area.• Length: 230 mm.• Weight: 500 g.• Class 2 protective insulation.

Clamping up to 5 mm. Used in place of the rotating centring tip. Feed is achieved by moving the entire tailstock.

"Step drill HSS spiral grooved.The deep-ground and spiral-shaped flute offers absolute smooth running and high cutting performance. In particular, non-breaking chips are removed cleanly as with a twist drill. This reduces the formation of built-up cutting edges and cold welding on the cutting edges. The cone facilitates the retraction of bored plates.Material:HSSCoating: blankCutting direction: right-hand cuttingShaft: three-face shaftPointing out: Form C: Cross sectionTip angle: 118°Point grinding: factory standardStep angle: 90°Tolerance: factory standard"

Tungsten-vanadium steel twist drill. Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

Centring drill for drill bits 68,80,68S,80S.Packaging: Self-service pouch.(supplied without mounting shank and crown)

Tungsten-vanadium steel twist drill.Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

"Switch between drilling and screwing in one simple movement Perfect for tasks that require pre-drillingSpeed is automatically adjusted when changing the operating modeElectronic torque monitoringKeyless and HEX chucksThe Maxxpack collection from Batavia is a flexible 18-V Li-ion platform for indoor and outdoor applications. Maxxpack allows you to operate multiple tools using just one type of battery and a charger.Technical data: Battery voltage: 18 V, Lithium-ion Idle speed: 0 - 450/0 -1500 rpm Torque settings: 12 Max. torque 26 Nm Gears: 2 Chuck: 10 mm, keyless Metal belt clip: yes LED work light: yes Product weight without accessories: 1.2 kg Product dimensions (L x W x H): 23.5 x 20.5 x 5.5 cmIncludes: drill bit and screwdriverBattery and charger not included"

For drilling, milling, grinding, polishing, cleaning, carving and engraving.Maximum speed: 20,000/min230V / 100WClass 2 protective insulation.

"Table drilling machine TBM 220 with three-stage belt drive and precision-bearing spindle.Plane-milled work table made of die-cast aluminium (220 x 120 mm) with rip fence and scale. As well as threaded holes for mounting the MICRO-coordinate table KT 70.Solid steel column (20 x 340 mm). Die-cast aluminium extension arm with spindelled guides and fits. High-quality, VDE-tested electric motor, extremely quiet and very durable. Drive via 3-fold belt pulley. By folding the flat belt, 3 idling speeds are achieved with more than 3 times the torque in the lower speed range. Practical drilling depth indicator with adjustable stop.Technical data:220 - 240 V. 85 W. 50 - 60 Hz. Idling speeds: 1,800, 4,700 and 8,500 rpm. Throat (column inside to centre of drilling spindle) 140 mm. Sleeve stroke 30 mm. Tool holding by 6 triple slotted MICROMOT steel collets (1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm). 3/8"" thread to screw on a gear rim drill chuck. Weight 3.3 kg.Max. Duty cycle: 10 min6 MICROMOT steel collets are included in the scope of delivery."

Tungsten-vanadium steel twist drill.Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

"Practical height adjustment via rack and pinion with smooth-running crank.Powerful, durable direct current motor. Spindle drive via three-speed pulley with the advantage of almost six times the torque in the lower speed range. Practical drill depth display with adjustable stop. Precision-mounted drilling spindle. Spindle head with 1/2"" thread for the associated ring-gear drill chuck (industrial quality). Spindle with additional holder for NO 28 200 steel collets. Ideal also for coordinate drilling with the KT 150 cross table.Technical data:230 volts. Spindle speeds 1080, 2400 and 4500 rpm. Stroke 63 mm. Height adjustment via crank 70 mm. Throat: 140 mm. Usable table surface 200 x 200 mm. Column 45 x 500 mm. Tool holder up to 10 mm. Drill capacity in steel 10 mm. Weight: approx. 10 kg. Practical height adjustment via rack and pinion with side crank.Stable, highly ribbed, face-milled work table with two T-slots.Practical drill depth display with adjustable stop.Ideal also for coordinate drilling with the KT 150 cross table.Note:Table and cantilever of the table drill machine offered here are made of die-cast aluminium. A high-grade, stainless, statically very strong material. Fittings and guides are machined (milled, spindled, turned) on our state-of-the-art CNC-controlled machines."

"Strong and versatile problem solver for the fine job in crafts and industry! Made in the EU.High-quality 10.8 V Li-ion battery with 2.6 Ah for a performance comparable to that of our mains-connected counterpart.With a battery charge, you can work for at least 30 minutes even when used powerfully. No one can do more in this performance class!With transmission head made of die-cast aluminum for precise ball bearing adjustments. Main housing made of glass fiber reinforced POLYAMIDE with soft component in the grip area.With balanced special DC motor, strong, quiet and durable.For Drilling, Milling, Grinding, Polishing, Cleaning, Disconnect, Engrave, Sign.With continuously variable electronic speed control for high torque even in the lower speed range. Double ball bearing precision shaft made of ground steel and six 3-way slotted MICROMOT steel clamps (1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm) ensure high concentricity. No chatter and beating of the insertion tools. With 20 mm MICROMOT system fit for use in drilling and horizontal stands. In a plastic case with 34 insertion tools, as shown here. The scope of delivery includes Li-ion Li/A2 (10.8 V) battery and LG/A. battery charger The new battery commissioning/a is TOP and comparable in performance to our mains-connected device. For working outdoors or when you need to use an extension cable, its use brings great advantages.Technical Data:10.8 V. 7,000 - 23,000 bpm. Length 270 mm. Weight approx. 700 g (incl. battery). The battery IBS/a with complete equipment is packed in a practical, stylish and super-stable plastic case made of high-quality PP. A side sticker defines the content."

Tungsten-vanadium steel twist drill.Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

Industrial drill chuck with MK 1For the tailstock of the PD 250/E. Clamping up to 10 mm.

For precision drilling, milling, sanding, polishing, brushing, derusting, engraving, chiselling and cutting.With drill chuck (clamping range 0.3 - 3.2 mm). Precision ball-bearing spindle made of ground steel that can be locked at the push of a button for tool changes. Recessed spindle head for inserting MICROMOT steel collets. Special balanced, powerful, quiet and long-lasting DC motor. Infinitely variable speed regulator with feedback effect (high tightening torque in the lower speed range). Housing made of glass-fibre-reinforced POLYAMIDE. We recommend the use of MICROMOT mains adapters with at least 2.0 A for operation.Technical data:DC voltage: 12 - 18 V. 100 W. 3,000 - 15,000 rpm. Length 185 mm. Weight: 450 g.

"Strong and versatile problem solver for the fine job in crafts and industry! Made in the EU.High-quality 10.8 V Li-ion battery with 2.6 Ah for a performance comparable to that of our mains-connected counterpart.With a battery charge, you can work for at least 30 minutes even when used powerfully. No one can do more in this performance class!With transmission head made of die-cast aluminum for precise ball bearing adjustments. Main housing made of glass fiber reinforced POLYAMIDE with soft component in the grip area.With balanced special DC motor, strong, quiet and durable.For Drilling, Milling, Grinding, Polishing, Cleaning, Disconnect, Engrave, Sign.With continuously variable electronic speed control for high torque even in the lower speed range. Double ball bearing precision shaft made of ground steel and six 3-way slotted MICROMOT steel clamps (1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm) ensure high concentricity. No chatter and beating of the insertion tools. With 20 mm MICROMOT system fit for use in drilling and horizontal stands. In a plastic case with 34 insertion tools, as shown here. The scope of delivery includes Li-ion Li/A2 (10.8 V) battery and LG/A. battery charger The new battery commissioning/a is TOP and comparable in performance to our mains-connected device. For working outdoors or when you need to use an extension cable, its use brings great advantages.Technical Data:10.8 V. 7,000 - 23,000 bpm. Length 270 mm. Weight approx. 700 g (incl. battery). Supplied without battery and charger in the box"