1883 products were found matching your search for electrolytic in 1 shops:

"SMD Electrolytic capacitor 220 µF - 50 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance test 2000h - 5000hPanasonic series FK-VTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

"Bipolar electrolytic capacitor with 22 µF for demanding audio and electronic circuit applications. Depending on the operating conditions, the dielectric strength is approx. 35 V DC or 100 V and under load at 150 W/8 ohms and 300 W/4 ohms. A very low loss factor supports efficient operation, while the high current carrying capacity with good long-term stability ensures stable results.Technical data:Type: Bipolar electrolytic capacitorNominal value: 22 µFRated power: ~ 35 V/100 V, 150 W/8 ohms, 300 W/4 ohmsSpacing: 30 mm"

"Bipolar electrolytic capacitor with 2.2 µF for applications in which reliable long-term stability and a high current load are required. The dielectric strength is approximately 35 V DC or 100 V, correspondingly designed for continuous operation under real load conditions. A very low loss factor supports efficient operation and contributes to the stability of the overall system. The grid size of 20 mm enables easy, precise integration into suitable circuits. Technical data:Type: Bipolar electrolytic capacitorNominal value: 2.2 µFRated power: ~ 35 V/100 V, 150 W/8 ohms, 300 W/4 ohmsSpacing: 20 mm"

"SMD Electrolytic capacitor 220 µF - 35 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance test 2000h - 5000hPanasonic series FK-VTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

Axial Aluminum Electrolytic Capacitors PEG124, +105°C and +125°COverviewKEMET's PEG124 is an electrolytic capacitor with very longlife and outstanding electrical performance. The device has a polarized all-welded design, tinned copper wire leads, a negative pole connected to the case, and plastic insulation. Long-life and very high reliability are achieved by dimensioning of the capacitor, careful selection of materials/methods, and discipline in quality control allowing operation up to +125°C/+105°C. The PEG124 winding is housed in a cylindrical aluminum can, with a high purity aluminum lid and high quality rubber gasket. The sealing system is designed for electrolyte leakage-free operation and a very low gas-diffusion rate of electrolyte. The low ESR is the result of a low resistive electrolyte/paper system and an all-welded design.Benefits• Operating temperature of +125°C and +105°C• Very long life, up to 27,500 hours at +105°C• Low ESR• Low ESL• Polarized all-welded designApplicationsKEMET's PEG124 is a high performance axial electrolytic capacitor. Typical applications include smoothing, coupling/ decoupling and energy storage in telecommunication, power supply system, data processing, process control nand measuring, where long life and high reliability are of paramount importance.

Aluminum Electrolytic CapacitorsRadialLead TypeeSeries: MFeatures• Endurance : 85°C, 2000 h

Aluminum Electrolytic CapacitorsRadial Lead TypeSeries: NHGType: AFeatures• Endurance : 105°C / 1000 h to 2000 h

"SMD Electrolytic capacitor 100 µF - 25 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance tes 2000hPanasonic series FKSTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

"SMD Electrolytic capacitor 330 µF - 35 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance test 2000h - 5000hPanasonic series FK-VTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

"SMD Electrolytic capacitor 120 µF - 35 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance tes 2000hPanasonic series FKSTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

"SMD Electrolytic capacitor 1000 µF - 25 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance test 2000h - 5000hPanasonic series FK-VTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

"Aluminum electrolytic capacitorRadial, wiredSeries: FRType: AFeaturesLow ESR (as for FM series)Endurance : 5000 h to 10000 h at +105°CAttentionnot applicable for automotive"

"SMD Electrolytic capacitor 180 µF - 25 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance tes 2000hPanasonic series FKSTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

"SMD Electrolytic capacitor 10 µF - 16 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance test 2000h - 5000hPanasonic series FK-VTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

Aluminum Electrolytic CapacitorsRadial Lead TypeSeries: NHGType: AFeatures• Endurance : 105°C / 1000 h to 2000 h

"SMD Electrolytic capacitor 100 µF - 50 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance test 2000h - 5000hPanasonic series FK-VTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

Aluminum Electrolytic CapacitorsSurface Mount TypeSeries: FT (High temperature Lead-Free reflow)Type: VFeatures• Endurance: 2000 h at 105°C• Miniaturized, Low ESR (1 size smaller than series FK)• Vibration-proof product is available upon request. (Ø8 mm and larger)

"SMD Electrolytic capacitor 220 µF - 10 V - 105°C105°C - for increased requirementsLow ESR - low impedanceEndurance test 2000h - 5000hPanasonic series FK-VTemperature range -55°C bis +105°CCapacitance tolerance: ±20%"

Aluminum Electrolytic CapacitorsSurface Mount TypeSeries: FT (High temperature Lead-Free reflow)Type: VFeatures• Endurance: 2000 h at 105°C• Miniaturized, Low ESR (1 size smaller than series FK)• Vibration-proof product is available upon request. (Ø8 mm and larger)

Aluminum Electrolytic CapacitorsSurface Mount TypeSeries: FC (High temperature Lead-Free reflow)Type: VFeatures• Endurance : 105°C / 1000 h• Low impedance (1/2 for HA series)• Vibration-proof product is available upon request. (Ø8 mm and larger)• AEC-Q200 qualified.