63 products were found matching your search for exhaust in 2 shops:

Radio exhaust control COMFORT AS-7030, with DIBT approval and 2x radio transmitters:1x radio thermo-transmitter for stovepipe1x radio mini transmitter for windowDIBT approval: Z-85.2-19Saves heating costs and avoids unnecessary continuous ventilationThermosensor: cable length 2mPlug-in fuse incl. main switch for Euro and earthing contact plugsWireless window contact in mini housing, housing in white and brown (for wooden windows)Battery life of the transmitter up to 5 yearsMaximum load 1800 watts (8A), operating voltage 230V / 50 HzRadio range up to 50 meters (free field)Radio frequency: 868 MHz (coded)ExpandableUp to 16 radio transmitters can be taught-inThese can be switched individually or in seriesOptional additional transmittersMod. AS T30 additional transmitter THERMO:- e.g. for operation of another fireplace / stoveMod. AS F20 Additional transmitter WINDOWS:- e.g. in case of existing winter garden or opening of another windowMod. AS R40 Additional transmitter ROLLLADEN:- e.g. for operation of an upstream roller shutter- A 5mm cable gland to the roller shutter must be provided by the customer.Power supply:Window transmitter: 1x 3V Lithium CR2477A (included in delivery)Thermo-transmitter: 3x 1,5 V Mignon battery (not included)Receiver: 230V/50HzScope of deliveryTransmitter for windows with magnetic contact + replacement housing in brownBattery CR2477ATransmitter for stovepipe incl. mounting materialSwitching device2 x plug-in fuse1 x mounting material/instructions

Replacement part for the Hair Vacuum. Part of the dual filtration system that keeps the air in your salon clean.

Exhaust gas temperature monitor ATW 519 - KDS 110/116The Cetrotec flue gas temperature monitor type 519 with 40°C switching point and 10 k resistor is approved for use in heat-generating systems and is mounted with a flange on a free piece of stove pipe with a diameter of at least 120 mm. Its normally open contact is only intended for control tasks and has been bridged by us with a 10 kOhm cable breakage protection resistor, which is why this version of the temperature monitor is only suitable as an optional accessory for our KDS cable exhaust air control systems, in order to activate an exhaust air system when the stove is cold without having to open a window every time, provided the approval of the master chimney sweep is available, as an exhaust air control system in combination with an exhaust gas temperature monitor does not have DIBt approval.Approved for use in heat-generating systems, TÜV tested in accordance with DIN EN 14597_2012-09Intrinsically safe design, maintenance-free with simple installation on the flue pipeNO contact with pre-mounted 10k cable break protection resistor, especially for KDS 110 and 116Approved medium temperature 500°C, max. 180°C on cable and switch headThis flue gas temperature monitor refined by Elektrotechnik Schabus is specially designed for use with the KDS cable exhaust air control systems. The KDS systems distinguish a deliberately open contact from a cable break with the help of a parallel-connected resistor of around 10 kOhm. The window contact and exhaust gas temperature monitor are connected in series. The negative state (window closed, oven burning) is produced by the closed contact, the positive state (window open or oven cold) causes the control line to become highly resistive. It is therefore not always necessary to open a window to operate the extractor hood, even though the oven may only be in operation very rarely. The pre-assembled 2 meter long temperature-resistant silicone cable can be extended with any 2-core cable if the heat range was reliably left during installation.Possible applicationsMonitoring tasks to switch off the exhaust air system in rooms with open or closed fireplaces to prevent exhaust gases from being sucked back into the rooms when the fireplace is burningOther monitoring and control tasks, such as controlling the storage loading pump in conjunction with KDS devicesNoteInvolve your chimney sweep in your planning before ordering so that nothing stands in the way of approval afterwards. There are significant regional differences over which Elektrotechnik Schabus has no influence.

Remove hot air from a computer case with a rear exhaust fan-Ball bearing fan design-Standard (full) profile expansion slot design-Inline LP4 Molex power connectorsThis high quality PCI Fan is an add-in cooling fan designed to fit in the PCI, ISA or AGP expansion slots of any computer. The PCI fan helps improve expansion card (video card, etc.) performance, by preventing overheating, making it a great video card cooler for older, hot-running 3D graphics cards like the Voodoo, TNT2, GeForce256 and more. Powered through a simple LP4 connection to the computer power supply, the quiet-running PCI Fan utilizes a brushless DC motor that helps maintain expansion card temperatures while creating minimal noise levels. Compact enough to fit into almost any expansion slot such that airflow can be directed as needed most, StarTech.com's PCI Fan is backed by 2-year warranty and free lifetime technical support.

The use of the remote ventilation control FTW 510 with a remote temperature system means that the ventilation system can only be used if the oven or the combustion sites are not running or are cold. A transmitter in the exhaust gas temperature monitor checks whether the oven is running or is off, and sends this information wirelessly to the receiver. This only releases the power supply for the ventilation system when the oven is off.. TÜV-tested. DIBt (Deutsches Institut für Bautechnik — German institute for civil engineering)) Approval Z-85.2-11 (receiver). DIN EN 14597_2012-09 (transmitter). Wireless link and battery monitoring. Relay contact 5 A changer (potential-free). Lighting of the extractor hood also works for the operation of the combustion sites. the FTW transmitter must be installed by a specialist company

1/2'' exhaust gas probe socket, external hexagon, 20 mmApplication: Operation of the lambda probe, particle sensor, NOX sensor and exhaust gas temperature sensorRobust design for fixed exhaust gas probesDouble square drive 1/2'' (12.5 mm)or actuation via hexagon 24 mmWrench size 20 mm for lambda sensor/particle filter sensor on e.g. IVECO Stralis, S-WayAlso suitable for closing the slot to avoid widening the opened hexagonTorque-controlled tighteningSlot width: 8 mm

One-minute switch-on delay (non-adjustable), run-on switch (adjustable from 2 to 30 minutes), interval timer (fan on every 0, 6, 12 or 24 hours)Innovative, low-noise and energy-saving exhaust fan in a stylish design with low noise level for intermittent or continuous ventilation of bathrooms, shower rooms, kitchens and other living spaces.Ball bearing motorFor exhaust air removalSuitable for wall mountingEnclosure and impeller made of high-quality, robust and UV-resistant ABS plasticCompatible with 100-mm dia. ventilation pipesThe aerodynamically profiled, semi-radial impeller ensures high air delivery performance and low noise levelsRemovable fan unit for easy cleaningThermal actuator for smooth opening and closing of the cover and to prevent return air flow when the fan isn't runningIncludes overheating protection

Radio exhaust control AS-7020 with DIBT approval and 1x radio transmitterThe PROTECTOR AS-7020 radio exhaust control is completely wireless and has a new mini transmitter, which can be used either with white or brown housing (suitable for wooden windows).DIBT approval: Z-85.2-19Saves heating costs and avoids unnecessary continuous ventilationPlug-in fuse incl. main switch for Euro and earthing contact plugsWireless window contact in mini housing, housing in white and brown (for wooden windows)Incl. battery: battery life up to 5 yearsMaximum load 1800 watts (8A), operating voltage 230V / 50 HzRadio range up to 50 meters (free field)ExpandableUp to 16 radio transmitters can be taught-inThese can be switched individually or in seriesOptional additional transmittersMod. AS T30 additional transmitter THERMO:- e.g. for operation of another fireplace / stoveMod. AS F20 Additional transmitter WINDOWS: - e.g. in case of existing winter garden or opening of another windowMod. AS R40 Additional transmitter ROLLLADEN:- e.g. for operation of an upstream roller shutter- A 5mm cable gland to the roller shutter must be provided on site.Power supplyReceiver: 230V/50HzTransmitter: 1x 3V-CR2477AScope of delivery:ReceiverMini radio transmitter window (with changeable housing in brown)3V Lithium battery CR2477AMounting material/instructions

Wireless exhaust controller, PROTECTOR, AS-500Simply installing the wireless exhaust controller AS-500 ensures that connected devices such as extractor hoods and fans will only operate when the window is open.Wireless range: up to 50 m (unobstructed)Coded to avoid interference with similar wireless devicesWireless frequency: 434 MHzTransmitter (window)Flat, white transmitter housing with 20-cm sensor cable for universal mountingBattery life: approx. 1 yearLED status indicators: window OPEN, window CLOSED and BATTERYReceiver (hood, fan)Child-safe intermediate plugSwitches connected devices ON when the window is open and OFF when the window is closedLED status indicators: window OPEN, window CLOSED and mains operationSwitching power 1800 W (8 A)Power supplyReceiver: 230 V/50 HzTransmitter: 3x AAA 1.5 V alkaline (not included in delivery)Included in delivery:Wireless window switch contactWireless socket switching device (receiver)Mounting materials/instructions

RADIO EXHAUST AIR CONTROL ASF-410Thanks to the simple installation of the ASF-410 wireless exhaust air control, connected appliances, such as extractor hoods or fans, can only be operated when the window is open.Radio range up to 50 meters (free field)Coded to prevent overlapping with similar devicesTransmitter (window)The new innovative transmitter does not require a magnetic contact. This makes faulty switching due to dropped or defective magnets a thing of the past.Quick and easy installation: concealed screw connection of the anchor plate. Slide on the transmitter, screw in, fine-tune (via rotating spacer threaded sleeve) - done!LED status display: Window OPEN (green), window CLOSED (red)Incl. 3V lithium battery CR2477 (service life approx. 3 years)Receiver (extractor hood, fan)Plug-in unit incl. childproof lockSwitches connected devices ON when the window is open and OFF when the window is closedLED status indicators: Window OPEN, window CLOSED and mains operationSwitching capacity 1800 watts (8A)Note: This wireless window contact switch does not have DIBt approval (German Institute for Building Technology)! Please ask your chimney sweep whether DIBt approval is mandatory before purchasing.

One-minute switch-on delay (non-adjustable), run-on switch (adjustable from 2 to 30 minutes), humidity sensor (adjustable from 60% to 90%)Innovative, low-noise and energy-saving exhaust fan in a stylish design with low noise level for intermittent or continuous ventilation of bathrooms, shower rooms, kitchens and other living spaces.Ball bearing motorFor exhaust air removalSuitable for wall mountingEnclosure and impeller made of high-quality, robust and UV-resistant ABS plasticCompatible with 100-mm dia. ventilation pipesThe aerodynamically profiled, semi-radial impeller ensures high air delivery performance and low noise levelsRemovable fan unit for easy cleaningThermal actuator for smooth opening and closing of the cover and to prevent return air flow when the fan isn't runningIncludes overheating protection

Innovative, low-noise and energy-saving exhaust fan in a stylish design with low noise level for intermittent or continuous ventilation of bathrooms, shower rooms, kitchens and other living spaces.Ball bearing motorFor exhaust air removalSuitable for wall mountingEnclosure and impeller made of high-quality, robust and UV-resistant ABS plasticCompatible with 100-mm dia. ventilation pipesThe aerodynamically profiled, semi-radial impeller ensures high air delivery performance and low noise levelsRemovable fan unit for easy cleaningThermal actuator for smooth opening and closing of the cover and to prevent return air flow when the fan isn't runningIncludes overheating protection

RADIO EXHAUST AIR CONTROL ASF-510Thanks to the simple installation of the ASF-510 wireless exhaust air control, connected appliances such as extractor hoods or fans can only be operated when the window is open.Radio range up to 50 meters (free field)Coded to prevent overlapping with similar devicesTransmitter (window)The new innovative transmitter does not require a magnetic contact. This makes faulty switching due to dropped or defective magnets a thing of the past.Quick and easy installation: concealed screw connection of the anchor plate. Slide on the transmitter, screw in, fine-tune (via rotating spacer threaded sleeve) - done!LED status display: Window OPEN (green), window CLOSED (red)Incl. 3V lithium battery CR2477 (service life approx. 3 years)Receiver (extractor hood, fan)Plug-in unit incl. childproof lockSwitches connected devices ON when the window is open and OFF when the window is closedLED status indicators: Window OPEN, window CLOSED and mains operationSwitching capacity 1800 watts (8A)Note: This wireless window contact switch does not have DIBt approval (German Institute for Building Technology)! Please ask your chimney sweep whether DIBt approval is mandatory before purchasing.

Wireless exhaust controller, transmitter and receiver in white, max. switching power 1800 W (8 A)Simply installing the wireless exhaust controller AS-510 ensures that connected devices such as extractor hoods and fans will only operate when the window is open.Wireless range: up to 50 m (unobstructed)Coded to avoid interference with similar devicesTransmitter (window)Slim wireless transmitter housing in white for universal mountingBattery life: approx. 1 yearReceiver (hood, fan)Child-safe intermediate plugSwitches connected devices ON when the window is open and OFF when the window is closedLED status indicators: window OPEN, window CLOSED and mains operationSwitching power 1800 W (8 A)Power supply:Transmitter: 1x 3 V CR 2032 (included in delivery)Receiver: 230 V/50 HzFrequency: 434 MHzIncluded in deliverySwitching device (receiver)Transmitter incl. 1x 3 V lithium battery CR2032Mounting materialsOperating instructions with calculation formula

Quick exhaust valve for compressed airPlug connection both sidesFor nylon, soft nylon and polyurethaneExhaust tube connection, external Ø: 6 mm

Integrated wireless exhaust controller AS-6020.3INTEGRATED DEVICE for extractor hood or flush-fitted socket with a new mini transmitter. Can be installed optionally with a white or brown housing (to suit wooden windows).Mini transmitter unitIncl. transmitter housing in brown (suitable for wooden windows)Simple sensor technology, with switchMaximum load capacity 1000 W (5 A)Operating voltage 230 V/50 Hz: 3 V - CR2450 (transmitter)Wireless range up to 50 m, depending on local conditionsThe light function of the extractor hood remains completely unchangedPotential-free contactIncluded in deliveryReceiverMini wireless transmitter (with replacement housing in brown)Mounting materials/instructions

Built-in radio exhaust air control with kinetic window transmitter ASK-6020ASK-6020 built-in radio exhaust air control with kinetic window transmitter.Controls exhaust air unit depending on the window openingThe exhaust air appliance (extractor hood, exhaust air fan, etc.) is released by the window contact when the window is opened. Installation variantLight function can be retainedExpandable with up to 7 additional transmittersKINETIK power in the window transmitterBatteries are no longer required - this saves money and protects the environment.Innovative security transmitter without magnetic contactMore security for your home - no incorrect switching due to incorrectly fitted or dropped magnets.Quick and easy installationFit the anchor plate, slide on the transmitter, engage, fine-tune - done! Suitable for tilt and turn windows.Window transmitter (for turn-tilt windows)NEW with KINETIK-POWER for the transmitter, i.e. batteries are no longer required.Innovative security transmitter without magnetic contact - no incorrect switching due to incorrectly fitted magnetsQuick and easy installation: Mount the anchor plate. Slide on the transmitter, click into place, fine-tune - done!Expandable with up to 7 additional window transmitters Mod. ASK-10Power supply: Mechanical kinetic generatorReceiver (extractor hood, fan)For installation in the extractor hood or in the flush-mounted boxLight function can be maintained even if the extractor is blocked (depending on model)Power supply: 230V / 50HzSwitching capacity: Max. 1000 W (4.3A)Radio range up to 100 meters (free field)Frequency: 434 MHz (coded)Scope of delivery:1x receiver (installation version)1x kinetic transmitter for the window1x installation material/instructionsNote: This wireless window contact switch does not have DIBt approval (German Institute for Building Technology)!Please ask your chimney sweep whether DIBt approval is mandatory before purchasing.

ASK-5020 wireless exhaust air control with battery-free kinetic window transmitter A world first - the new generation of radio window transmittersKINETIK power in the window transmitter:Batteries are no longer required - saving money and protecting the environment.Innovative security transmitter without magnetic contact: More security for your home - no false switching due to incorrectly fitted or dropped magnets.Quick and easy installation: Mount the anchor plate, slide on the transmitter, click into place, fine-tune - done! Suitable for tilt and turn windows.Window transmitter (for turn-tilt windows)NEW with KINETIK-POWER for the transmitter, i.e. batteries are no longer required.Innovative security transmitter without magnetic contact - no incorrect switching due to incorrectly fitted magnetsQuick and easy installation: Mount the anchor plate. Slide on the transmitter, click into place, fine-tune - done!Expandable with up to 7 additional window transmitters Mod. ASK-10Power supply: Mechanical kinetic generatorReceiver (extractor hood, fan)Intermediate plug-in unit incl. child safety lockMechanical plug-in fuse with main switch functionPower supply: 230V / 50 HzSwitching capacity: Max. 1800 W (8A)Radio range up to 100 meters (free field)Frequency: 434 MHz (coded)

Exhaust air flow control valve, GRE-1/8Technical data:Valve function: throttle sound pressure functionSelection of additional function: with silencerPneumatic connection 1: G1/8Adjusting element: slotted screwMounting method: screw-inNominal flow rate in throttle direction: 520 l/minNormal flow 0.6->0 MPa (6->0 bar, 87->0 psi): 0 l/min to 520 l/minAmbient temperature: -10°C to 70°CInstallation position: anySymbol: 00991451Operating pressure, complete temperature range: 0 to 10 barOperating medium: compressed air according to ISO 8573-1:2010 [7:-:-]Note on the operating/control medium: oiled operation possible (required for further operation)LABS conformity: VDMA24364-B1/B2-LMedium temperature: -10°C to 70°CRated tightening torque: 12 NmTolerance to the rated tightening torque: ± 20%Product weight: 15 gScrewed plug material: aluminium wrought alloyNote on materials: RoHS-compliantSeal material: NBRAdjustment screw material: brass

Exhaust air flow control valve, GRE-1/2FESTO is one of the world's leading manufacturers of high-quality technological automation solutions and pneumatic components, offering a wide range of products from precise valves and cylinders to complete system solutions.The innovative products are characterised by high levels of reliability and durability.Technical data:Selection of additional function: with silencerPneumatic connection 1: G1/2Adjusting element: slotted screwMounting method: screw-inNominal flow rate in throttle direction: 3600 l/minNormal flow 0.6->0 MPa (6->0 bar, 87->0 psi): 0 l/min to 4300 l/minOperating pressure: 0 to 10 barAmbient temperature: -10°C to 70°CInstallation position: anySymbol: 00991451Operating medium: compressed air according to ISO 8573-1:2010 [7:-:-]Note on the operating/control medium: oiled operation possible (required for further operation)LABS conformity: VDMA24364-B1/B2-LMedium temperature: -10°C to 70°CProduct weight: 75 gScrewed plug material: aluminium wrought alloyNote on materials: RoHS-compliantSeal material: NBRAdjustment screw material: brass