2036 products were found matching your search for machine in 2 shops:

Jaw width 100 mm. Span 75 mm. Distance from slot centre to slot centre 135 mm. Slots 105 x 15 mm. Weight: 5.0 kg. Otherwise like PRIMUS 75.

8½", with millimeter graduation. Super lightweight, fiberglass reinforced. The wavy teeth with parallel arrangement, manages to keep the hair at the desired length while cutting. Handy, flexible handle with short and long hole, making it easy to work from the wrist.

Machine viceManufactured from die-cast zinc. With three machined bearing surfaces. Plus a groove to fit the longitudinal stop for bench drill TBM and drill stand MB 140/S.Vertical and horizontal prism for round material. Jaw width 50 mm. Jaw height 10 mm. Maximum clamping width 34 mm.

ULTIMATECUT combi machine tap for core hole and through-hole threads HSSThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)Nominal thread size: M10Net weight: 20 gThread pitch: 1.50 mmLength: 80 mmDiameter: 85 mmCoating: uncoatedShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassAluminiumOther areas of application BronzeCast ironPlastic

ULTIMATECUT combi machine tap for core hole and through-hole threads HSSThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)Nominal thread size: M8Net weight: 14.1 gThread pitch: 1.25 mmLength: 72 mmDiameter: 68 mmCoating: uncoatedShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassAluminiumOther areas of application BronzeCast ironPlastic

ULTIMATECUT combi machine tap for core hole and through-hole threads HSSThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)Nominal thread size: M6Net weight: 10.3 gThread pitch: 1.00 mmLength: 63 mmDiameter: 5 mmCoating: uncoatedShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassAluminiumOther areas of application BronzeCast ironPlastic

ULTIMATECUT combi machine tap for core hole and through-hole threads HSSThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)Nominal thread size: M5Net weight: 9.4 gThread pitch: 0.80 mmLength: 57 mmDiameter: 42 mmCoating: uncoatedShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassAluminiumOther areas of application BronzeCast ironPlastic

ULTIMATECUT combi machine tap for core hole and through-hole threads HSSThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)Nominal thread size: M4Net weight: 8.5 gThread pitch: 0.70 mmLength: 54 mmDiameter: 33 mmCoating: uncoatedShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassAluminiumOther areas of applicationBronzeCast ironPlastic

ULTIMATECUT combi machine tap for core hole and through-hole threads HSSThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)Nominal thread dimension: M3Net weight: 8.4 gThread pitch: 0.50 mmLength: 51 mmDiameter: 2.5 mmCoating: uncoatedShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassAluminiumOther areas of application BronzeCast ironPlastic

Machine screws +/-self-tapping Ø 3.2 mmCountersunk head with PZ1/S combination driveDouble surface finishCorrosion resistant to DIN VDE

ULTIMATECUT combi machine tap for core hole and through-hole threads HSS RUnaTECThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)RUnaTEC Even more wear-resistant, even more biting when removing material. The RUnaTEC coating developed by RUKO guarantees even better performance. The coated RUnaTEC variant is particularly impressive for demanding materials, such as tempered steel, thanks to its powerful penetration into the material and even better wear resistance. Nominal thread size: M10Net weight: 20 gThread pitch: 1.50 mmLength: 80 mmDiameter: 85 mmCoating: RUnaTECShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassBronzeAluminiumOther areas of application Steel 1100 N/mm²Cast ironPlastic

ULTIMATECUT combi machine tap for core hole and through-hole threads HSS RUnaTECThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)RUnaTEC Even more wear-resistant, even more biting when removing material. The RUnaTEC coating developed by RUKO guarantees even better performance. The coated RUnaTEC variant is particularly impressive for demanding materials, such as tempered steel, thanks to its powerful penetration into the material and even better wear resistance. Nominal thread size: M8Net weight: 14.1 gThread pitch: 1.25 mmLength: 72 mmDiameter: 68 mmCoating: RUnaTECShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassBronzeAluminiumOther areas of application Steel 1100 N/mm²Cast ironPlastic

ULTIMATECUT combi machine tap for core hole and through-hole threads HSS RUnaTECThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)RUnaTEC Even more wear-resistant, even more biting when removing material. The RUnaTEC coating developed by RUKO guarantees even better performance. The coated RUnaTEC variant is particularly impressive for demanding materials, such as tempered steel, thanks to its powerful penetration into the material and even better wear resistance. Nominal thread size: M6Net weight: 10.3 gThread pitch: 1.00 mmLength: 63 mmDiameter: 5 mmCoating: RUnaTECShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassBronzeAluminiumOther areas of application Steel 1100 N/mm²Cast ironPlastic

ULTIMATECUT combi machine tap for core hole and through-hole threads HSS RUnaTECThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)RUnaTEC Even more wear-resistant, even more biting when removing material. The RUnaTEC coating developed by RUKO guarantees even better performance. The coated RUnaTEC variant is particularly impressive for demanding materials, such as tempered steel, thanks to its powerful penetration into the material and even better wear resistance. Nominal thread size: M5Net weight: 9.4 gThread pitch: 0.80 mmLength: 57 mmDiameter: 42 mmCoating: RUnaTECShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassBronzeAluminiumOther areas of application Steel 1100 N/mm²Cast ironPlastic

ULTIMATECUT combi machine tap for core hole and through-hole threads HSS RUnaTECThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)RUnaTEC Even more wear-resistant, even more biting when removing material. The RUnaTEC coating developed by RUKO guarantees even better performance. The coated RUnaTEC variant is particularly impressive for demanding materials, such as tempered steel, thanks to its powerful penetration into the material and even better wear resistance. Nominal thread dimension: M3Net weight: 8.4 gThread pitch: 0.50 mmLength: 51 mmDiameter: 2.5 mm

ULTIMATECUT combi machine tap for core hole and through-hole threads HSS RUnaTECThe ULTIMATECUT combi machine tap is ideal for sheet metal working with a cordless screwdriver with clockwise/anti-clockwise rotation. The FLOWSTEP® tip allows perfect centring without centre punching.Flanks: relief-groundDimensions: 1/4'' x 27.0 mmMax. material thickness: 1 x M (e.g. M10 = 10 mm material thickness)RUnaTEC Even more wear-resistant, even more biting when removing material. The RUnaTEC coating developed by RUKO guarantees even better performance. The coated RUnaTEC variant is particularly impressive for demanding materials, such as tempered steel, thanks to its powerful penetration into the material and even better wear resistance. Nominal thread size: M4Net weight: 8.5 gThread pitch: 0.70 mmLength: 54 mmDiameter: 33 mmCoating: RUnaTECShank: bit shankCutting direction: clockwiseMaterial: HSSTolerance: ISO 2 6HMain application Steel 900 N/mm²BrassBronzeAluminiumOther areas of application Steel 1100 N/mm²Cast ironPlastic

The precise vertical milling machine for the finest work. Spindle speeds 5000 - 20,000 rpm. For working with extremely small cutters.Stable machine base made of cast iron, vertical guide and cross table. With play-free, readjustable dovetail guide in all axes. Diecast aluminium boom housing, with 24-pole special motor (balanced). For vibration-free working at high speeds.Tools held by MICROMOT system collets (steel, hardened, three slot), with one each of 1 - 1.5 - 2 - 2.4 - 3 and 3.2 mm. Table with three continuous T-slots (MICROMOT standard 12 x 6 x 5 mm). A sliding ruler facilitates the positioning of the cross carriage.Technical data:230 V. 100 W. 50/60 Hz. 5000 - 20,000 rpm. Table 200 x 70 mm. Travel: X (transverse) 134 mm, Y (longitudinal) 46 mm, Z (vertical) 80 mm. Machine base (installation area) 130 x 225 mm. Overall height 370 mm. Weight: approx. 7 kg. The clamping claws shown are included in the scope of delivery, but not the workpiece!

Practical height adjustment via rack and pinion with smooth-running crank.Powerful, durable direct current motor. Spindle drive via three-speed pulley with the advantage of almost six times the torque in the lower speed range. Practical drill depth display with adjustable stop. Precision-mounted drilling spindle. Spindle head with 1/2'' thread for the associated ring-gear drill chuck (industrial quality). Spindle with additional holder for NO 28 200 steel collets. Ideal also for coordinate drilling with the KT 150 cross table.Technical data:230 volts. Spindle speeds 1080, 2400 and 4500 rpm. Stroke 63 mm. Height adjustment via crank 70 mm. Throat: 140 mm. Usable table surface 200 x 200 mm. Column 45 x 500 mm. Tool holder up to 10 mm. Drill capacity in steel 10 mm. Weight: approx. 10 kg. Practical height adjustment via rack and pinion with side crank.Stable, highly ribbed, face-milled work table with two T-slots.Practical drill depth display with adjustable stop.Ideal also for coordinate drilling with the KT 150 cross table.Note:Table and cantilever of the table drill machine offered here are made of die-cast aluminium. A high-grade, stainless, statically very strong material. Fittings and guides are machined (milled, spindled, turned) on our state-of-the-art CNC-controlled machines.

Tool holder for cylindrical grinding on lathesMade of steel with 20 mm MICROMOT system fit.For precise clamping of IBS/E or LBS/E drill grinders in the steel holder of the lathe. Stem size 8 x 10 mm. Total length: 65 mm.

Machine hammer, 300 g, with steel head and wooden handle, ideal for precision work, woodwork, repairs and DIY tasks, comfortable grip and optimum controlThis 300-g machine hammer is ideal for woodwork, assembly and various household tasks. The steel head enables precise and controlled impacts, while the wooden handle provides a natural and pleasant grip. Lightweight and well balanced, it is perfect for medium-sized nails, repairs and detailed work. A reliable hand tool for beginners and experienced DIY enthusiasts who appreciate precision and convenience.