432 products were found matching your search for pferd in 1 shops:

The fabric is suitable for universal, heavy-duty processing of alloyed and non-alloyed steels as well as non-ferrous metals. The carton has a tear-off edge for separating off sections of the abrasive strip at the workplace.Technical data:PFERD TOOLS type: SBR 38Width metric: 38 mmHole dia.: 75 mmAbrasive: corundum ALength metric: 25 mGrain size: 40Advantages:Optimum contour adjustment due to high flexibility.Low wear due to high tear resistance and very good grain adhesion.

The set contains six HSS spiral drills in the INOX version in HSSE-Co5 (M35) for industrial use. The shatterproof plastic box protects the tools from dirt and damage.Technical data:Quantity: 6PFERD TOOLS type: SET DIN338 HSSG N INOX 6PCVersion: INOXSpiral angle, from: 36°Angle: 135°Advantages:Excellent chip removal.High concentricity accuracy.Precise centring and low feed force thanks to cross-grinding.Ideal for tough and hard materials such as alloyed and high-strength steel, stainless steel (INOX).Stable tip design.Very long service life.Excellent temperature resistance thanks to Co content.Recommendations for use:Observe the recommended speeds.When drilling metals, use a high-quality cutting oil or coolant whenever possible. This promotes smooth running and extends the service life of the drill. Exception: When machining aluminium, use petroleum instead of cutting oil.To prevent corrosion, remove the particles from the workpiece that are a result of machining stainless steel (INOX). Clean the workpiece chemically or mechanically (etching/polishing etc.).

The diamond handy file sets come in a practical shatterproof plastic box that protects the tools from damage. These are ideal for storage in places such as in the tool trolley or in the workbench. Diamond riffler files are used to process hard-to-reach areas and complex geometries. The coating length is 25 mm on both sides of the files.Technical data:Grit size: D 126Recommendations for use:File by applying little pressure, especially on edges.Added diamond files can be cleaned in petroleum or antistatic plastic cleaner with a file brush. Alternatively, it can be cleaned using an ultrasonic process. In a lot of cases simple tapping will suffice.Work as grease-free as possible!Machinable materials:Abrasive materialsCase-hardened steelsFerrite (magnetic material)GlassGraphite and electrocarbonSuperalloys, nickel or titanium-basedSteel materials with a hardness > 54 HRC

PFERD TOOLS chain saw files are used worldwide for sharpening saw chains. They can be used individually with a handle or in combination with depth gauge files with the CHAIN SHARP chain saw sharpeners that are so popular with users. Flat file for repairing and sharpening saw chains with angular tooth base. For edge grinding on saw chains. Cut for universal sharpening.Technical data:PFERD TOOLS type: 1215Shape: flat stumpWidth, metric: 12.4 mmCut: 2Length, metric: 175 mmHeight: 3.3 mmAdvantages:The flat version can be used both to sharpen the cutting edge and to lower the depth gauge. Especially recommended for beginners.Machinable materials:Steels up to 1200 N/mm² (Machining tasks:SharpeningDrive types:Manual insert

PFERD TOOLS offers holders for various files and file blades. The PFERD TOOLS range includes riffler file holders, adjustable holders for body files, as well as holders for file blades, carbide files and manual deburrers. PFERD TOOLS adjustable holders enable individual clamping of body file blades to adjust to the surface contour to be machined. The bending radius of the file can be continuously adjusted thanks to the clamping device. The ergonomically shaped and particularly lightweight holder allows individual clamping of body file blades to adapt to the surface contour to be machined.Technical data:PFERD TOOLS type: KFHSuitable for length [mm]: 350 mmAdvantages:The bending radius of the file is infinitely adjustable by means of a clamping device.Extremely lightweight plastic construction without plasticisers.Can be used on points and over areas, as the body file can be used both bent and straight.Low-fatigue work thanks to vibration-dampening rubber buffers.Drive types:Manual insert

Universally applicable for cleaning, rust removal, smoothing, cleaning of weld seams, light deburring and removal of corrosion and varnishes. Specially designed for use at low speeds on cordless screwdrivers and power drills. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications.

PFERD TOOLS offers a wide range of coated abrasive tools for the processing of different workpiece geometries and materials. They consist of a backing material, a base bond and a coating bond to which the abrasive grain adheres. Depending on the grain size, coated abrasive tools can achieve high material removal or a very fine surface finish. The backing materials available differ in their properties such as tear resistance, flexibility and wear. With the right base, the grinding tool is adapted to the requirements of the intended application: paper is used in the woodworking industry and in the craft industry, e.g. among carpenters, painters and varnishers, cloth is mainly used in metal processing, and vulcanised fibre is very wear-resistant and is used in different thicknesses mainly for the production of fibre discs.

The diamond needle file set comes in a practical shatterproof plastic box that protects the tools from damage. This provides ideal storage in places such as the tool trolley or workbench. Diamond needle files can be used universally in tool making. The set contains one file of the profile flat, triangular, square, half-round and roundTechnical data:Grit size: D 126Length, cover: 70 mmLength, total: 140 mmRecommended use:File by applying only a little pressure, especially on edges.Added diamond files can be cleaned in petroleum or antistatic plastic cleaner with a file brush. Alternatively, it can be cleaned using an ultrasonic process. In a lot of cases simple tapping will suffice.Work as grease-free as possible!Machinable materials:Abrasive materialsCase-hardened steelsFerrite (magnetic material)GlassGraphite and electrocarbonSuperalloys, nickel or titanium-basedSteel materials with a hardness > 54 HRCTechnical ceramicTool steelsCarbide

The set contains three cutting discs and a POLIFAN flap disc for steel and stainless steel (INOX) with high cutting performance/stock removal rate and good service life.Technical data:PFERD TOOLS type: SET 125 PSF STEELOX (EHT 1.0/PFC Z60)Max. RPM: 12,200 RPMHole dia.: 22.23 mmOutside dia. metric: 125 mmAdvantages:Can be used universally on steel and stainless steel (INOX).Fast work progress due to high cutting performance/good stock removal rate.High cost-effectiveness due to good service life.Processable materials:Stainless steel (INOX)SteelApplications:ChamferingCuttingCutting of thin sheet metal and profilesDeburringSurface grindingWeld seam processingDrive types:Angle grinderCordless angle grinder

Suitable for medium-duty brushing tasks such as rust removal, brushing of weld seams and light deburring work. To meet the special requirements when machining stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience gained from the industrial environment confirms that it offers very good corrosion resistance with an optimal service life. All PFERD TOOLS brushes with INOX filament are marked blue and suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic during cold hardening, meaning it is attracted to magnets.This is caused by a structural change caused by deformation, e.g. during wire drawing. This does not affect the quality and corrosion resistance of the INOX filament. It retains its corrosion-resistant properties. Stainless steel wire (INOX) withstands temperatures up to 450°C.

Depth gauge files are flat rectangular sharpening files that allow precise re-sharpening of depth gauges on saw chains. Depth gauge files are also available to fit the various PFERD TOOLS chain saw sharpeners. Rectangular file, tanged, with two round uncut edges and cut on two sides. Shape F according to DIN 7262. Flat chainsaw files are used for filing the depth gauges of saw chains. Single cut for universal sharpening. Files are delivered in point-of-sale packaging without a handle.Technical data:PFERD TOOLS type: 1213 rukShape: Flat stumpWidth, metric: 20 mmCut: 2Length, metric: 200 mmHeight: 3.5 mmAdvantages:Removal rate precisely tailored to depth gauges.Machinable materials:Steels up to 1200 N/mm² (Machining tasks:SharpeningDrive types:Manual insert

The PFERD TOOLS bench grinding wheels are designed for commonly available grinding wheels on the market. The UNIVERSAL version is ideal for universal use in workshops.Technical data:Max. rpm: 4500 rpmWidth, metric: 20 mmHole diameter: 32 mmOuter diameter, metric: 150 mmGrit size: 60Advantages:Long service life.Excellent dimensional stability.High grinding performance.Integrated reduction sleeves for mounting on almost any grinding bench spindle.Recommendations for use:Regular pulping of the disc exposes sharp grit and maintains a straight grinding surface.Adjust the workpiece backing continuously to the grinding wheel diameter (max. gap width 3 mm).Machinable materials:Cast ironStainless steel (INOX)Steel

Hole saws are made of tough, shatterproof and sturdy HSS bimetal. The saw teeth are made of high-quality M42 (Co8) material. They are used to create breakthroughs. The thread version 5/8-18 UNF includes the threads LS 32 to LS 210. The matching hole saw shaft is LSS 2.Technical data:RPM of stainless and acid resistant steels: 70 rpmRPM of soft non-ferrous metals: 190 rpm RPM of steels up to 1200 N/mm²: 140 rpmRPM of thermoplastics, fibre-reinforced plastics (GRP/CFRP): 230 rpmCutting depth, max.: 31 mmOuter diameter, metric: 60 mmAdvantages:Economical sawing of round openings.No rattling thanks to variable tooth pitch.Excellent concentricity accuracy.Good chip removal.Convenient centring and guiding of the hole saw thanks to the changeable HSS centring drill.Delivery of the hole saw shaft with compression spring for improved ejection of the sawn material.

POLINOX grinding drums are particularly suitable for processing large surfaces. The non-woven abrasive is arranged radially in a lamellar shape. The lamellae are packed very tightly, resulting in a long service life.Technical data:Max. RPM: 4800 RPMOpt. RPM: 2500 RPMWidth metric: 100 mmHole dia: 19 mmAbrasive: corundum AOutside dia. metric: 100 mmGrain size: 180Advantages:Long service life due to densely packed lamellae.Cool grinding and low thermal load on the workpiece.No clogging of the tool due to open structure and high flexibility of the non-woven material.Machinable materials:AluminiumBrassBronzeCast steelCobalt-based alloysCopperFibre-reinforced thermosets (GRP, CFRP)Hardened, tempered steels above 1200 N/mm² (Nickel-based alloys (e.g. Inconell and Hasteloy)Stainless steel (INOX)Steel materials with a hardness > 54 HRCSteels up to 1200 N/mm² (ThermoplasticsTitaniumTitanium alloysZinc

High-performance support plate with long service life due to abrasion-resistant, glass-fibre reinforced plastic. Impresses with particularly cool grinding due to radial cooling fins and high removal rate by the fibre disc due to a sturdy, rigid design.Technical data:PFERD TOOLS type: H-GT 125Max. RPM: 12,200 RPMSuitable for dia. metric: 125Suitable for: angle grinder 125, holder M14Version: not specifiedThread dia: M14Recommendations for use:Use fibre discs according to ISO 15636 with support plate on commercially available angle grinders.Drive types:Angle grinderCordless angle grinderOrdering instructions:The matching clamping nut is includedSafety instructions:The maximum permissible peripheral speed is 80 m/s.For safety reasons, the specified maximum permissible speed must never be exceeded.

Set of different POLICAP grinding caps with matching holder. POLICAP tools have a seamless design and the entire tool surface can be used. Colour identification of grain sizes: 60 and 80 = brown, 150 = black, 280 = red-brown Cylindrical shape WRC (formerly shape C).Technical data:PFERD TOOLS type: PCS WRC 110Shape: WRCWidth metric: 145 mmLength metric: 180 mmHeight: 40 mmAdvantages:Robust, reusable plastic packaging.Secure seating of the grinding caps and sleeves on the holder as the holder expands during use.High dimensional stability and excellent fine grinding due to a special manufacturing process.Simple tool change.Recommendations for use:

The PFERD TOOLS bench grinding wheels are designed for commonly available grinding wheels on the market. The HSS version is used in particular for sharpening HSS drill bits or for machining other high-alloy steels.Technical data:Max. rpm: 3350 rpmWidth, metric: 25 mmHole diameter: 51 mmOuter diameter, metric: 200 mmGrit size: 80Advantages:Long service life.Excellent dimensional stability.High grinding performance.Integrated reduction sleeves for mounting on virtually any grinding bench spindle.

The COMBICLICK system consists of a specially developed backing pad and a stable mounting on the back of the tool. The backing pad allows COMBICLICK tools to be used on commercially available angle grinders. The special geometry of the cooling slots ensures a high air flow rate, which significantly reduces the thermal load on the abrasive material and the workpiece. Compared to conventional tools, the quick-release system, the robust mounting, the secure locking of the tool and the integrated cooling system result in up to 30% lower workpiece temperatures, 25% higher cutting performance, 30% longer service life and better utilisation of the abrasive material. Set for surface processing from coarse to mirror-polished. Consisting of COMBICLICK fibre discs, non-woven discs, felt discs, backing plates and matching polishing paste. The set with a diameter of 125 mm is particularly flexible in the edge area. The universal polishing paste is not available separately, but only as part of the set.Technical data:PFERD TOOLS type: CC-SET 125 M14Outside dia. metric: 125 mmThread dia.: M14

Support plate for optimal contour adjustment due to high flexibility. Complies with ISO 15636.Technical data:PFERD TOOLS type: GT 125Max. RPM: 12,200 RPMSuitable for dia. metric: 125Suitable for: angle grinder 125, holder M14Version: not specifiedThread dia: M14Recommendations for use:Use fibre discs according to ISO 15636 with support plate on commercially available angle grinders.Drive types:Angle grinderCordless angle grinderOrdering information:The matching clamping nut is included.Safety instructions:The maximum permissible peripheral speed is 80 m/s.For safety reasons, the specified maximum permissible speed must never be exceeded.

Carbide rotary cutters with MICRO teeth are specially designed for fine machining and are used in areas where mounted points are used, among other tools. They offer a higher cutting performance compared to grinding cutters and impress with excellent surface quality. At the same time, they are low vibration and low noise. They retain their geometry for their entire service life. They are ideal for machining tasks in manual and machine use. Virtually all materials up to a hardness of 68 HRC can be machined. The 1502 MICRO set contains ten small carbide rotary cutters for finishing in the most common shapes and dimensions. The shatterproof plastic box protects the tools from dirt and damage.