1566 products were found matching your search for pressure in 1 shops:

"Gas pressure regulator 50 mbar with 80 cm gas hose DRS 452The DRS 452 set consists of a gas pressure regulator (50 mbar) and an 80 cm gas hose. It reliably regulates the gas cylinder pressure for camping appliances and is suitable for propane, butane and LPG mixtures. Compatible with 5 and 11 kg gas cylinders, robust and safe - ideal for camping and outdoor applications.Set consisting of gas pressure regulator 50 mbar DR 117 and gas hose 80 cm (G 1/4"" LH)Ideal for gas barbecues, camping stoves, lamps and heatersFor connecting to 5 and 11 kg gas cylinders (with DE connection) The CFH gas pressure regulator DRS 452 (item no.: 52452) is the ideal solution for the safe operation of camping appliances. The set consists of a gas pressure regulator with 50 mbar working pressure and an 80 cm long gas hose. It reliably regulates the gas cylinder pressure and is suitable for LPG (propane, butane and their mixtures). The regulator is compatible with 5 and 11 kg gas cylinders (DE connection) and offers a nominal flow rate of 1.5 kg/h at an inlet pressure of 0.3-16 bar. The robust construction and compact design make the set perfect for camping and outdoor use. Scope of delivery: Set consisting of gas pressure regulator DR 117, gas hose 80 cmMatching products: CFH CK 411 camping stove"

" Suitable for camping stoves, camping lamps, camping heaters and other heaters 50 mbar G 1/4"" LH 1.5 kg/h Use outdoors only."

"Small, handy, practical: the testo 511 absolute pressure gauge measures absolute pressure and is also suitable for barometric height measurement between two points.The absolute pressure gauge testo 511 is very handy, small and very easy to use. It measures absolute pressure with an accuracy of +/-3 hPa and is ideal for absolute pressure compensation in flow measurements. By entering the altitude above sea level on site, this is converted to barometric air pressure. In addition, the meter allows barometric altitude measurement between two points.Product advantages:high precision absolute pressure measurement with ±3 hPasuitable for barometric altitude measurementscalculation of barometric air pressure8 pressure units availableTechnical features:Absolute pressureMeasuring range: 300 to 1200 hPaAccuracy: ±3 hPa ± 1 digitResolution: 0,1 hPaMeasuring cycle: 0.5 sGeneral technical dataOperating temperature: 0 to +50 °CProtection class: IP40Selectable units: hPa, mbar, Pa, mmH2O, inH2O, inHg, mmHg, psiBattery type: 2 micro cells AAALifetime: 200 h (typical without display illumination)Scope of delivery: testo 511 absolute pressure gauge including protective cap, belt pouch, batteries and calibration protocol."

"The DR 460 gas pressure regulator reliably reduces the pressure of screw-in cartridges to 50 mbar and ensures the safe operation of camping appliances. Suitable for LPG (propane, butane and their mixtures) and compatible with CFH screw-in cartridges UG 230 and UG 440. With integrated flow monitor and robust design - ideal for outdoor and camping useIdeal for gas barbecues, camping stoves, lamps and heatersWith regulating valve and excess flow valve (flow monitor)For connection to a UG 230 (art. no.: 52109) or UG 440 (art. no.: 52108) universal pressure gas canisterInlet: Cartridge connection valve G.35 (7/16"" - 28 UNEF)Outlet: Threaded connection H.4 (G 1/4"" LH)Outlet pressure: 50 mbarNominal flow rate: 0.8 kg/h The CFH DR 460 gas pressure regulator (item no.: 52460) is the perfect solution for the safe operation of camping devices with screw-in cartridges. It reliably regulates the gas pressure to 50 mbar and is suitable for LPG (propane, butane and their mixtures). The regulator is compatible with CFH UG 230 and UG 440 screw-in cartridges and offers a nominal flow rate of 0.8 kg/h at an inlet pressure of 0.3-16 bar. Thanks to the integrated regulating valve and flow monitor, the DR 460 guarantees maximum safety. The robust construction and compact design make it ideal for camping and outdoor use. Scope of delivery: DR 460 gas pressure regulatorMatching products: CFH universal pressure gas cans UG 230 (item no.: 52109), UG 440 (item no.: 52108)"

"edding 8890 Automatic carpenter's pencil - the marking tool for everyday use in the trade and DIYA refillable, durable and easy-to-use alternative to the classic wooden carpenter's pencil for the day-to-day work of tradespeople DIY enthusiasts. This interchangeable rectangular lead is particularly well-suited to hard and rough materials, and enables precise edge guidance. The robust aluminium shaft and the ability to refill with edding 8891 refill leads make it a reliable companion for tradespeople and DIY enthusiasts. The clip on the protective holster allows the edding 8890 to be easily attached to (work) clothingDescription:Automatic carpenter's pencil in a practical holster for marking on various surfaces such as wood, cardboard, stone and concreteParticularly robust aluminium shaftThe interchangeable rectangular lead (2x5 mm) is particularly well suited to hard and rough materials and enables precise edge guidanceReady-to-use product including HB graphite leadRefillable with the separately available edding 8891 refill leads (set of 6) in HB and 10H grades for a wide range of surfaces"

Single-sided pressure roller with ball bearing.For pressing edgebands, PVC welding foils etc.. For the HM/HG 2420 E, 2520 E, 2620 E, 2600 E and MobileHeat 7 hot air units.

Pressure roller with ball bearing, guided on one side.For pressing edgebands, PVC welding films etc. For the HM/HG 2420 E, 2520 E, 2620 E, 2600 E and MobileHeat 7 heat guns.

Brass pressure roller 7 mm x Ø 30 mm, with ball bearing.For pressing welding films at corners and angles for a perfect finished result. Brass roller with ball bearing, for HM/HG 2420 E, 2520 E, 2620 E and 2600 E.

Pressure roller.For edgebands and perfect welding of PVC sheets. For HM/HL/HG 1620 S, 1820 S, 1821 S, 1920 E, 2020 E, 2120 E, 2220 E, 2320 E, MOBILEHEAT 1/3/5 hot air units.

Pressure roller, guided on one side.Silicone pressure roller with ball bearing for pressing edgebands, PVC welding films etc. For the HM/HG 2420 E, 2520 E, 2620 E, 2600 E and MobileHeat 7 heat guns.

JUMO MIDAS C08OEM pressure transmitter - basicApplications• Compressors• Mechanical and plant engineering• Industrial pneumatics• Commercial vehicles• Building technologyDescriptionThis pressure transmitter is a basic product from the MIDAS range. It is ideal for applications requiring reliable and stable long-term implementation of measuring tasks and excellent value for money.The innovative and patented sensor design of the specially developed ceramic sensor ensures excellent long-term stability Features:• Process reliabilityThe construction of this pressure transmitter enables it to achieve excellent vibration resistance and can be used under high vibration loads, for example, in commercial vehicles.• EconomicalQuickon quick-clamp technology for easier and more secure installation. Spring contacts guarantee contact even under fluctuating temperatures.Technical dataBasic type: JUMO MIDAS C08 OEM pressure transmitter - basicRelative pressure measuring range: overpressure: 0 - 16 barOutput: 4 - 20 mA, two-wireSupply voltage: 8 - 30 V DC, nominal supply voltage 24 V DCProcess connection: G 1/4 DIN EN 837Process connection material: stainless steelSeal material: elastomerElectrical connection: cable socket DIN EN 175301-803, type A, ex DIN 43650

"The PeakTech 5144 is a measuring instrument used to determine pressure differences.It has a digital multifunction display with backlight. This high-precision measuring instrument can be used in the installation, diagnosis, repair, maintenance and optimisation of air conditioning, heating and ventilation systems. The USB interface and the supplied software are used to log the measured values over longer periods of time.Product benefits:For measuring static differences and pressure differencesMeasuring range of maximum 200 mBarPressure measurement in 11 selectable units of measurement such as: Bar, mbar, psi kg/cm2, kpa and many moreAuto power-off functionData hold functionMIN, MAX, AVG recording functionIntegrated magnetic holder for hands-free operationUSB interface and PC softwareAccessories: Case, USB interface cable, 4mm and 8mm connection tubes, tube adapter, software for Windows, batteries and instruction manual."

"ESD pressure screw with protective cap made of electrostatic dissipative material.The ESD pressure screw was specially developed for use in ESD protection zones (EPA - electrostatic protected area) for work on electrostatically sensitive components, assemblies or devices in accordance with the DIN EN 61340-5-1 standard.Product benefits:For open support arms, quenched and tempered, zinc-plated and passivatedStrength class 8.8With removable protective cap and nut-disc elementTechnical information:Discharge resistance according to DIN IEC/TR 61340-5-2 between 10^4 and 10^9 ohmsDischarge time according to DIN IEC/TR 61340-5-2 Surface voltage (electric field strength) according to DIN EN 61340-5-1 Note: The ESD pressure screw is not insulating. It must not be used in areas where work is carried out with open voltages."

"ESD pressure screw with protective cap made of electrostatic dissipative material.The ESD pressure screw was specially developed for use in ESD protection zones (EPA - electrostatic protected area) for work on electrostatically sensitive components, assemblies or devices in accordance with the DIN EN 61340-5-1 standard.Product benefits:For open support arms, quenched and tempered, zinc-plated and passivatedStrength class 8.8With removable protective cap and nut-disc elementTechnical information:Discharge resistance according to DIN IEC/TR 61340-5-2 between 10^4 and 10^9 ohmsDischarge time according to DIN IEC/TR 61340-5-2 Surface voltage (electric field strength) according to DIN EN 61340-5-1 Note: The ESD pressure screw is not insulating. It must not be used in areas where work is carried out with open voltages."

"ESD pressure screw with protective cap made of electrostatic dissipative material.The ESD pressure screw was specially developed for use in ESD protection zones (EPA - electrostatic protected area) for work on electrostatically sensitive components, assemblies or devices in accordance with the DIN EN 61340-5-1 standard.Product benefits:For push rod clamps, quenched and tempered, zinc-plated and passivatedStrength class 8.8With removable protective cap and nutTechnical information:Discharge resistance according to DIN IEC/TR 61340-5-2 between 10^4 and 10^9 OhmDischarge time according to DIN IEC/TR 61340-5-2 Surface voltage (electric field strength) according to DIN EN 61340-5-1 Note: The ESD pressure screw is not insulating. It must not be used in areas where work is carried out with open voltages."

"ESD pressure screw with protective cap made of electrostatic dissipative material.The ESD pressure screw was specially developed for use in ESD protection zones (EPA - electrostatic protected area) for work on electrostatically sensitive components, assemblies or devices in accordance with the DIN EN 61340-5-1 standard.Product benefits:For open support arms, quenched and tempered, zinc-plated and passivatedStrength class 8.8With removable protective cap and nut-disc elementTechnical information:Discharge resistance according to DIN IEC/TR 61340-5-2 between 10^4 and 10^9 ohmsDischarge time according to DIN IEC/TR 61340-5-2 Surface voltage (electric field strength) according to DIN EN 61340-5-1 Note: The ESD pressure screw is not insulating. It must not be used in areas where work is carried out with open voltages."

"ESD pressure screw with protective cap made of electrostatic dissipative material.The ESD pressure screw was specially developed for use in ESD protection zones (EPA - electrostatic protected area) for work on electrostatically sensitive components, assemblies or devices in accordance with the DIN EN 61340-5-1 standard.Product benefits:For push rod clamps, quenched and tempered, zinc-plated and passivatedStrength class 8.8With removable protective cap and nutTechnical information:Discharge resistance according to DIN IEC/TR 61340-5-2 between 10^4 and 10^9 OhmDischarge time according to DIN IEC/TR 61340-5-2 Surface voltage (electric field strength) according to DIN EN 61340-5-1 Note: The ESD pressure screw is not insulating. It must not be used in areas where work is carried out with open voltages."

"ESD pressure screw with protective cap made of electrostatic dissipative material.The ESD pressure screw was specially developed for use in ESD protection zones (EPA - electrostatic protected area) for work on electrostatically sensitive components, assemblies or devices in accordance with the DIN EN 61340-5-1 standard.Product benefits:For push rod clamps, quenched and tempered, zinc-plated and passivatedStrength class 8.8With removable protective cap and nutTechnical information:Discharge resistance according to DIN IEC/TR 61340-5-2 between 10^4 and 10^9 OhmDischarge time according to DIN IEC/TR 61340-5-2 Surface voltage (electric field strength) according to DIN EN 61340-5-1 Note: The ESD pressure screw is not insulating. It must not be used in areas where work is carried out with open voltages."

"IP protection class IP 67Horn speaker with waterproof design and 8-ohm impedance. High IP protection class, high sound pressure, good speech intelligibility, compact design.ApplicationsPublic address systems in factory halls, stations etc.External address system on vehiclesUse in alarm systemsRated power: 6 WMusic power: 10 WNominal impedance Z: 8 ohmTransmission range (-10 dB): 380 - 20,000 HzMean sound pressure level: 93 dB (1 W/1 m)Beam angle (-6 dB): 69°/4000 HzVoice coil diameter: 15 mmNet weight: 0.35 kgSound pressure level: 100 dB (1 W/1 m) @ 1600 HzColour: blackConnections: stripped cable ends (red = plus)Length of connection cable: 0.5 mIP protection class: IP 67Temperature range: -40 - 100°C"

"Weatherproof plastic cabinetUV-resistantFunctional at low temperatures in accordance with EN 60068-2-1 (-40°C, 96 h)Meets the requirements of Germanischer Lloyd (requirements for electrical equipment/cold)Plastic: ABS (UL 94: HB)IP protection type: IP66Short pressure chamber horn loudspeaker for the mid/high range. Waterproof version with 8 Ohm impedance made of black, impact-resistant ABS plastic, high IP protection class. High sound pressure and good speech intelligibility. Ideal for inconspicuous installation due to the very compact dimensions. Articulated bracket with metal base plate for mounting on ceilings, walls, projections etc. Additional mounting options are provided by two integrated metal threads (M4) on the rear.ApplicationsPublic address systems in factory halls, stations etc.Outdoor sound systemsUse in alarm systemsRated power: 15 WNominal impedance Z: 8 ohmTransmission range (-10 dB): 700 - 15,000 HzMean sound pressure level: 101 dB (1 W/1 m)Net weight: 0.45 kgMaximum sound pressure level: 112 dB (15 W/1 m)Length of connection cable: 0.35 mIP protection type: IP66Temperature range: -40 - 70°C"