19 products were found matching your search for propane in 1 shops:

Extension hose, 3 mPlastic hose3/8'' left on both sidesSuitable for all flame weeding devices

For all hose soldering devices, heating torches and flame weeding devices Input - G.5/output - H.6 3/8'' according to EN 16129, flow 6 kg/h With combination connection for 5, 11 and 33 kg propane cylinders Use outdoors only.

Continuously adjustable with manometer Input - G.5/output - H.6 3/8'' according to EN 16129, flow 6 - 10 kg/h Ideal for heating torches and flame weeding devices Use outdoors only.

Propane gas hose, 3 mPlastic hose1/4'' left on both sides

The MQ9 breakout board detects carbon monoxide, methane, propane and other flammable gases so that the right measures can be taken in good time. The sensor detects carbon monoxide at 10-1000 ppm and other combustible gases at 100-10000 ppm.The digital and analog outputs are located on the vias, marked DO and AO. The digital output can be obtained by setting a threshold value with a potentiometer. The analog output depends on the intensity of the gases.Technical dataGas detection: carbon monoxide, methane, propane, flammable gasesLogic voltage: 5 VOperating voltage: 5 VOperating temperature: -10°C to 50°C (14 to 122 °F)Gas detection range: 10-1000 ppm CO, 100-10000 ppm combustible gasesPreheating time: 48 hoursMounting holes: 2Dimensions: 22 x 38 mmInstructions for usethe sensor requires 48 hours to preheat to the optimum operating temperature. If it detects gas, the LED lights up. If no gases are present, it remains switched off.Highly corrosive gases considerably weaken the sensor.External linkshttps://github.com/SolderedElectronics/CO--flammable-gasses-sensor-MQ9-breakout-hardware-design

30% propane 70% butane Contents 600 ml/330 g

30% propane 70% butane 410 ml

Compressed gas can UG 440 30% propane 70% butane Contents 440 g Threaded connection 7/16'' UNEF

For conventional propane-butane compressed gas cans With extraction valve in accordance with DIN EN 417 Output H.6 3/8'' according to EN 16129 For propane gas canister soldering devices with gas hose 3/8'' left

DR460 pressure regulator for use with screw-in cartridge (CFH no. 52108, 52109)Type of gas: propane/butaneGas supply: screw-in cartridge with 7/16 inch UNEF threadDevice category: 50-mbar pressure regulatorIntended use: regulating the pressure of the gas cylinder to the working pressure required for the end deviceInput connection: 7/16 inch UNEFOutput connection: 1/4 inch leftRegulated pressure (Pd): 50 mbarFlow rate (Mg): 0.8 kg/h per hourMaterial: brass/metal alloyColours: brass/blueStandard: EN 16129

Butane/propylene/propane High-performance gas mixture Contents 110 ml/60g Suitable for immediate overhead work

Mobile, powerful cartridge hose soldering device Soldering possible in all positions For soldering, brazing, heating, defrosting, flaming, tinning, burning off, melting, treating thermoplastics and lighting charcoal Includes 1.5 m propane gas hose and steel bracket for attaching the cartridge container directly to work clothing Includes 2x CFH 52149 gas cartridge

Refill gas NG 96 Contents 250 ml/139 g 15% propane 85% butane Various filling adapters available

Professional, high-performance soldering and brazing device with a high-quality 20-mm dia. turbo torch and a special 14-mm dia. torch for spot solderingAlso suitable for connection to conventional propane/butane gas cylindersSoldering possible in all positionsComplete with mounting bracket for working clothes, including 1.5 m propane hose. Including 1x universal CR 52107 compressed gas can

GX-K2 gas alarm with external sensoraudiovisual warning (LED and loud piezo sound)Detects a variety of fluorinated refrigerants (HFCs)R-22, R-32, R-404a, R-410a, R-1234yf and many other HFCsCross-sensitivity to methane, butane, propane (R-290), ethanol, hydrogen and many moreIdeal for the operation of private air conditioning systemsVery simple sensor test with gas from lighterSensor service life up to approx. 5 years, external sensor can be replaced by the user himselflow-cost replacement possible with internal sensor from Elektrotechnik SchabusMost coolants and refrigerants are toxic, many are flammable and others also have a high GWP (= global warming potential), i.e. they are extremely harmful to the climate. A leak in the coolant line is usually noticed quickly, the cooling function is then no longer given, so thermometers are more helpful than coolant warning devices. However, the leaking coolant, which evaporates quickly due to its properties, should not be inhaled under any circumstances. This is precisely the purpose of the refrigerant sensors with the GX-K1 (int. sensor) and GX-K2 (ext. sensor) socket warning devices. These are warning devices that are primarily designed to protect human health. They are set very sensitively according to their purpose and also have cross-sensitivities to some flammable gases. For example, they can easily be tested for their function with the depressurized gas of a standard lighter, because R-290 is nothing other than propane, which is often used as a refrigerant in heat pumps. R-22, R-32, R-404a, R-410a, R-1234yf and many other HFCs can be detected with the GX-K1 and K2, with R-32 defined as the target gas. The sensor also has cross-sensitivity to methane, butane, propane (R-290), ethanol, hydrogen and other hydrocarbons.Possible applicationsheat pumpsair conditioning systemsCoolants and refrigerantsFluorocarbon

GX-K1 gas alarm with internal sensoraudiovisual warning (LED and loud piezo sound)Detects a variety of fluorinated refrigerants (HFCs)R-22, R-32, R-404a, R-410a, R-1234yf and many other HFCsCross-sensitivity to methane, butane, propane (R-290), ethanol, hydrogen and many moreIdeal for the operation of private air conditioning systemsVery simple sensor test with gas from lighterSensor service life up to approx. 5 years, external sensor can be replaced by the user himselflow-cost replacement possible with internal sensor from Elektrotechnik SchabusMost coolants and refrigerants are toxic, many are flammable and others also have a high GWP (= global warming potential), i.e. they are extremely harmful to the climate. A leak in the coolant line is usually noticed quickly, the cooling function is then no longer given, so thermometers help better than coolant warning devices. However, the leaking coolant, which evaporates quickly due to its properties, should not be inhaled under any circumstances. This is exactly what the refrigerant sensors with the GX-K1 (int. sensor) and GX-K2 (ext. sensor) socket warning devices are for. These are warning devices that are primarily designed to protect human health. They are set very sensitively according to their purpose and also have cross-sensitivities to some flammable gases. For example, they can easily be tested for their function with the depressurized gas of a standard lighter, because R-290 is nothing other than propane, which is often used as a refrigerant in heat pumps. R-22, R-32, R-404a, R-410a, R-1234yf and many other HFCs can be detected with the GX-K1 and K2, with R-32 defined as the target gas. The sensor also has cross-sensitivity to methane, butane, propane (R-290), ethanol, hydrogen and other hydrocarbons.Possible applicationsheat pumpsair conditioning systemsCoolants and refrigerantsFluorocarbon

Thanks to its high-quality sensors, this gas detector reacts with lightning speed to the generation of life-threatening gases such as methane, propane, butane, natural gas and town gas.TÜV/GS tested quality. Simple assembly. Significant safety-relevant advantages compared to gas detectors that are supplied without cables. Optional connection directly to 12V supply.Including mounting material, operating instructions and application descriptionPower supply: 220 V or 12 VDimensions: 85 x 85 x 35 mmWeight: 98 gPower consumption: approx. 1 Watt standby / 1.7 Watt alarmTemperature range: -10° - +40°warning tone: 85 dB / 3m distanceThe lifetime of the electrochemical sensor in the CC-3000 gas detector starts with initial activation. The date of replacement stated on the device is not relevant!

Propane/butane replacement and extension hose 1/4'' left For gas grills, camping stoves, etc.

Gaslock level indicator to determine the level of your butane or propane gas bottle (5 kg, 11 kg or 33 kg). Place the device in the upper part of the bottle (adheres by integrated magnets).A red light comes on when the push button is pressed. Remove the device from the bottle and place it a little further down on the bottle. As soon as you reach the liquefied gas area, the indicator light changes from red to green. The measuring point of the filling level can be seen on the raised central line with the two arrows on the device. A very precise filling level can be determined by moving the device up and down slightly.Easy to useFilling level displayed within seconds thanks to ultrasonic measurementIncl. batteryIdeal for camping, outdoor use, gas barbecue, boat etc. ABS plastic enclosure, CR2032 lithium battery, ultrasonic level measurement, dimensions H/W/D: 65 mm/30 mm/16 mm, II 3 G Ex na IIA T3