96 products were found matching your search for report in 1 shops:

100% testing in the Class EA Channel LinkEach patch cable undergoes a Class EA Channel Link test after assembly. After successful measurement, each patch cable is provided with a wrap-around label including an individual serial number. The serial number is also listed on the enclosed measurement report for clear traceability. This gives users and operators of data networks the certainty that these patch cables operate without transmission problems in the Class EA Channel Link. Underwriter Laboratories (UL) approvedThese Cat. 6A patch cords from Good Connections® meet the highest international safety standards. They have been tested and found suitable by Underwriter Laboratories (UL) according to applicable safety regulations in the USA and Canada. High quality cable constructionThe conductor of this patch cable is made of 99.99% oxygen-free copper (OFC/CU). This high-quality cable construction enables optimal signal transmission and higher breaking strength of the cable. For a flawless signal transmission, the RJ45 plugs are shielded and equipped with 50 µ gold-plated copper contacts.S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure a consistently high and loss-free signal transmission. LSZH jacket for more safetyUnlike PVC cables, the Low Smoke Zero Halogen (LSZH) cable jacket causes very little toxic smoke and low smoke emission in the event of a fire. This makes the cables ideal for indoor installation - they are mandatory in public areas.Technical specification:- Cat. 6A component certified according to ANSI/TIA-568-C.2- With latching nose protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10 Gigabit capable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs - connector with 50 µ gold plated contacts- S/FTP cable (shielding with foil and braiding)- PiMF (cores in pairs in metal foil)- Raw cable manufactured according to Cat. 7 specifications- inner conductor: 4x2xAWG26/7- Conductor material and contacts made of 99.9% oxygen-free copper (OFC)- Outer sheath diameter: 6.5 mm- Flame retardant according to IEC 60332-1- Assignment 1:1 according to EIA/TIA-568B- Halogen-free according to IEC 60754-2- Low smoke according to IEC 61034- Gold-plated contact surfaces- Length imprint on connector sleeve- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 5 m

100% testing through Class EA Channel LinkEach patch cable undergoes the Class EA Channel Link test after assembly.After successful measurement, each patch cable is being labelled with a wrap label as well as an individual serial number. The serial number, which serves for a reliable traceability, is also listed in the measurement protocol. Users and operators of data networks are hereby provided with the security, that these patch cables work without signal transmission deficits in the Class EA Channel Link. Underwriter Laboratories (UL) certifiedThese Cat. 6A patch cables by Good Connections® have been manufactured in accordance to international safety regulations. They have been tested and certified by the Underwriter Laboratories (UL) in accordance to current safety regulations in the USA and Canada. High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC/CU). This enables an increased signal transmission and a higher breaking strength of the cable. The RJ45 plugs are shielded and equipped with 50µ gold plated copper contacts, to ensure a faultless signal transmission. S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure for a consistently high and loss-free signal transmission. LSZH cable sheath for more safetyThe Low Smoke Zero Halogen (LSZH) cable sheath causes, in the event of a fire, only a very little amount of toxic fumes and low production of smoke in comparison to PVC cables. Therefore the cable are ideal for an indoor installation - they are mandatory in public places. Technical specifications:- Cat. 6A component certified according to ANSI/TIA-568-C.2- Including latch protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10GB-compatable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs- Plugs with 50µ gold plated contacts- SFTP cable (foil & mesh shielding)- PiMF (pairs in metal foil)- Raw cable manufactured according to Cat. 7 requirements- Inner conductor: 4x2xAWG26/7- Conductor material and contacts made from 99,99% oxygen free copper (OFC)- Cable sheath diameter: 6,5 mm- Flame-retardant according to IEC 60332-1- Contacting: 1:1 according to EIA/TIA-568B- Cable length imprinted on grommets- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 1 m

100% testing through Class EA Channel LinkEach patch cable undergoes the Class EA Channel Link test after assembly.After successful measurement, each patch cable is being labelled with a wrap label as well as an individual serial number. The serial number, which serves for a reliable traceability, is also listed in the measurement protocol. Users and operators of data networks are hereby provided with the security, that these patch cables work without signal transmission deficits in the Class EA Channel Link. Underwriter Laboratories (UL) certifiedThese Cat. 6A patch cables by Good Connections® have been manufactured in accordance to international safety regulations. They have been tested and certified by the Underwriter Laboratories (UL) in accordance to current safety regulations in the USA and Canada. High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC/CU). This enables an increased signal transmission and a higher breaking strength of the cable. The RJ45 plugs are shielded and equipped with 50µ gold plated copper contacts, to ensure a faultless signal transmission. S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure for a consistently high and loss-free signal transmission. LSZH cable sheath for more safetyThe Low Smoke Zero Halogen (LSZH) cable sheath causes, in the event of a fire, only a very little amount of toxic fumes and low production of smoke in comparison to PVC cables. Therefore the cable are ideal for an indoor installation - they are mandatory in public places. Technical specifications:- Cat. 6A component certified according to ANSI/TIA-568-C.2- Including latch protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10GB-compatable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs- Plugs with 50µ gold plated contacts- SFTP cable (foil & mesh shielding)- PiMF (pairs in metal foil)- Raw cable manufactured according to Cat. 7 requirements- Inner conductor: 4x2xAWG26/7- Conductor material and contacts made from 99,99% oxygen free copper (OFC)- Cable sheath diameter: 6,5 mm- Flame-retardant according to IEC 60332-1- Contacting: 1:1 according to EIA/TIA-568B- Cable length imprinted on grommets- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 50 m

100% testing through Class EA Channel LinkEach patch cable undergoes the Class EA Channel Link test after assembly.After successful measurement, each patch cable is being labelled with a wrap label as well as an individual serial number. The serial number, which serves for a reliable traceability, is also listed in the measurement protocol. Users and operators of data networks are hereby provided with the security, that these patch cables work without signal transmission deficits in the Class EA Channel Link. Underwriter Laboratories (UL) certifiedThese Cat. 6A patch cables by Good Connections® have been manufactured in accordance to international safety regulations. They have been tested and certified by the Underwriter Laboratories (UL) in accordance to current safety regulations in the USA and Canada. High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC/CU). This enables an increased signal transmission and a higher breaking strength of the cable. The RJ45 plugs are shielded and equipped with 50µ gold plated copper contacts, to ensure a faultless signal transmission. S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure for a consistently high and loss-free signal transmission. LSZH cable sheath for more safetyThe Low Smoke Zero Halogen (LSZH) cable sheath causes, in the event of a fire, only a very little amount of toxic fumes and low production of smoke in comparison to PVC cables. Therefore the cable are ideal for an indoor installation - they are mandatory in public places. Technical specifications:- Cat. 6A component certified according to ANSI/TIA-568-C.2- Including latch protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10GB-compatable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs- Plugs with 50µ gold plated contacts- SFTP cable (foil & mesh shielding)- PiMF (pairs in metal foil)- Raw cable manufactured according to Cat. 7 requirements- Inner conductor: 4x2xAWG26/7- Conductor material and contacts made from 99,99% oxygen free copper (OFC)- Cable sheath diameter: 6,5 mm- Flame-retardant according to IEC 60332-1- Contacting: 1:1 according to EIA/TIA-568B- Cable length imprinted on grommets- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 3 m

100% testing through Class EA Channel LinkEach patch cable undergoes the Class EA Channel Link test after assembly.After successful measurement, each patch cable is being labelled with a wrap label as well as an individual serial number. The serial number, which serves for a reliable traceability, is also listed in the measurement protocol. Users and operators of data networks are hereby provided with the security, that these patch cables work without signal transmission deficits in the Class EA Channel Link. Underwriter Laboratories (UL) certifiedThese Cat. 6A patch cables by Good Connections® have been manufactured in accordance to international safety regulations. They have been tested and certified by the Underwriter Laboratories (UL) in accordance to current safety regulations in the USA and Canada. High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC/CU). This enables an increased signal transmission and a higher breaking strength of the cable. The RJ45 plugs are shielded and equipped with 50µ gold plated copper contacts, to ensure a faultless signal transmission. S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure for a consistently high and loss-free signal transmission. LSZH cable sheath for more safetyThe Low Smoke Zero Halogen (LSZH) cable sheath causes, in the event of a fire, only a very little amount of toxic fumes and low production of smoke in comparison to PVC cables. Therefore the cable are ideal for an indoor installation - they are mandatory in public places. Technical specifications:- Cat. 6A component certified according to ANSI/TIA-568-C.2- Including latch protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10GB-compatable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs- Plugs with 50µ gold plated contacts- SFTP cable (foil & mesh shielding)- PiMF (pairs in metal foil)- Raw cable manufactured according to Cat. 7 requirements- Inner conductor: 4x2xAWG26/7- Conductor material and contacts made from 99,99% oxygen free copper (OFC)- Cable sheath diameter: 6,5 mm- Flame-retardant according to IEC 60332-1- Contacting: 1:1 according to EIA/TIA-568B- Cable length imprinted on grommets- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 20 m

100% testing through Class EA Channel LinkEach patch cable undergoes the Class EA Channel Link test after assembly.After successful measurement, each patch cable is being labelled with a wrap label as well as an individual serial number. The serial number, which serves for a reliable traceability, is also listed in the measurement protocol. Users and operators of data networks are hereby provided with the security, that these patch cables work without signal transmission deficits in the Class EA Channel Link. Underwriter Laboratories (UL) certifiedThese Cat. 6A patch cables by Good Connections® have been manufactured in accordance to international safety regulations. They have been tested and certified by the Underwriter Laboratories (UL) in accordance to current safety regulations in the USA and Canada. High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC/CU). This enables an increased signal transmission and a higher breaking strength of the cable. The RJ45 plugs are shielded and equipped with 50µ gold plated copper contacts, to ensure a faultless signal transmission. S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure for a consistently high and loss-free signal transmission. LSZH cable sheath for more safetyThe Low Smoke Zero Halogen (LSZH) cable sheath causes, in the event of a fire, only a very little amount of toxic fumes and low production of smoke in comparison to PVC cables. Therefore the cable are ideal for an indoor installation - they are mandatory in public places. Technical specifications:- Cat. 6A component certified according to ANSI/TIA-568-C.2- Including latch protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10GB-compatable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs- Plugs with 50µ gold plated contacts- SFTP cable (foil & mesh shielding)- PiMF (pairs in metal foil)- Raw cable manufactured according to Cat. 7 requirements- Inner conductor: 4x2xAWG26/7- Conductor material and contacts made from 99,99% oxygen free copper (OFC)- Cable sheath diameter: 6,5 mm- Flame-retardant according to IEC 60332-1- Contacting: 1:1 according to EIA/TIA-568B- Cable length imprinted on grommets- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 40 m

100% testing through Class EA Channel LinkEach patch cable undergoes the Class EA Channel Link test after assembly.After successful measurement, each patch cable is being labelled with a wrap label as well as an individual serial number. The serial number, which serves for a reliable traceability, is also listed in the measurement protocol. Users and operators of data networks are hereby provided with the security, that these patch cables work without signal transmission deficits in the Class EA Channel Link. Underwriter Laboratories (UL) certifiedThese Cat. 6A patch cables by Good Connections® have been manufactured in accordance to international safety regulations. They have been tested and certified by the Underwriter Laboratories (UL) in accordance to current safety regulations in the USA and Canada. High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC/CU). This enables an increased signal transmission and a higher breaking strength of the cable. The RJ45 plugs are shielded and equipped with 50µ gold plated copper contacts, to ensure a faultless signal transmission. S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure for a consistently high and loss-free signal transmission. LSZH cable sheath for more safetyThe Low Smoke Zero Halogen (LSZH) cable sheath causes, in the event of a fire, only a very little amount of toxic fumes and low production of smoke in comparison to PVC cables. Therefore the cable are ideal for an indoor installation - they are mandatory in public places. Technical specifications:- Cat. 6A component certified according to ANSI/TIA-568-C.2- Including latch protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10GB-compatable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs- Plugs with 50µ gold plated contacts- SFTP cable (foil & mesh shielding)- PiMF (pairs in metal foil)- Raw cable manufactured according to Cat. 7 requirements- Inner conductor: 4x2xAWG26/7- Conductor material and contacts made from 99,99% oxygen free copper (OFC)- Cable sheath diameter: 6,5 mm- Flame-retardant according to IEC 60332-1- Contacting: 1:1 according to EIA/TIA-568B- Cable length imprinted on grommets- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 0,5 m

100% testing through Class EA Channel LinkEach patch cable undergoes the Class EA Channel Link test after assembly.After successful measurement, each patch cable is being labelled with a wrap label as well as an individual serial number. The serial number, which serves for a reliable traceability, is also listed in the measurement protocol. Users and operators of data networks are hereby provided with the security, that these patch cables work without signal transmission deficits in the Class EA Channel Link. Underwriter Laboratories (UL) certifiedThese Cat. 6A patch cables by Good Connections® have been manufactured in accordance to international safety regulations. They have been tested and certified by the Underwriter Laboratories (UL) in accordance to current safety regulations in the USA and Canada. High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC/CU). This enables an increased signal transmission and a higher breaking strength of the cable. The RJ45 plugs are shielded and equipped with 50µ gold plated copper contacts, to ensure a faultless signal transmission. S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure for a consistently high and loss-free signal transmission. LSZH cable sheath for more safetyThe Low Smoke Zero Halogen (LSZH) cable sheath causes, in the event of a fire, only a very little amount of toxic fumes and low production of smoke in comparison to PVC cables. Therefore the cable are ideal for an indoor installation - they are mandatory in public places. Technical specifications:- Cat. 6A component certified according to ANSI/TIA-568-C.2- Including latch protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10GB-compatable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs- Plugs with 50µ gold plated contacts- SFTP cable (foil & mesh shielding)- PiMF (pairs in metal foil)- Raw cable manufactured according to Cat. 7 requirements- Inner conductor: 4x2xAWG26/7- Conductor material and contacts made from 99,99% oxygen free copper (OFC)- Cable sheath diameter: 6,5 mm- Flame-retardant according to IEC 60332-1- Contacting: 1:1 according to EIA/TIA-568B- Cable length imprinted on grommets- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 10 m

100% testing through Class EA Channel LinkEach patch cable undergoes the Class EA Channel Link test after assembly.After successful measurement, each patch cable is being labelled with a wrap label as well as an individual serial number. The serial number, which serves for a reliable traceability, is also listed in the measurement protocol. Users and operators of data networks are hereby provided with the security, that these patch cables work without signal transmission deficits in the Class EA Channel Link. Underwriter Laboratories (UL) certifiedThese Cat. 6A patch cables by Good Connections® have been manufactured in accordance to international safety regulations. They have been tested and certified by the Underwriter Laboratories (UL) in accordance to current safety regulations in the USA and Canada. High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC/CU). This enables an increased signal transmission and a higher breaking strength of the cable. The RJ45 plugs are shielded and equipped with 50µ gold plated copper contacts, to ensure a faultless signal transmission. S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure for a consistently high and loss-free signal transmission. LSZH cable sheath for more safetyThe Low Smoke Zero Halogen (LSZH) cable sheath causes, in the event of a fire, only a very little amount of toxic fumes and low production of smoke in comparison to PVC cables. Therefore the cable are ideal for an indoor installation - they are mandatory in public places. Technical specifications:- Cat. 6A component certified according to ANSI/TIA-568-C.2- Including latch protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10GB-compatable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs- Plugs with 50µ gold plated contacts- SFTP cable (foil & mesh shielding)- PiMF (pairs in metal foil)- Raw cable manufactured according to Cat. 7 requirements- Inner conductor: 4x2xAWG26/7- Conductor material and contacts made from 99,99% oxygen free copper (OFC)- Cable sheath diameter: 6,5 mm- Flame-retardant according to IEC 60332-1- Contacting: 1:1 according to EIA/TIA-568B- Cable length imprinted on grommets- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 0,25 m

100% testing through Class EA Channel LinkEach patch cable undergoes the Class EA Channel Link test after assembly.After successful measurement, each patch cable is being labelled with a wrap label as well as an individual serial number. The serial number, which serves for a reliable traceability, is also listed in the measurement protocol. Users and operators of data networks are hereby provided with the security, that these patch cables work without signal transmission deficits in the Class EA Channel Link. Underwriter Laboratories (UL) certifiedThese Cat. 6A patch cables by Good Connections® have been manufactured in accordance to international safety regulations. They have been tested and certified by the Underwriter Laboratories (UL) in accordance to current safety regulations in the USA and Canada. High-quality cable structureThe shielded conductor consists by 99,99% of oxygen free copper (OFC/CU). This enables an increased signal transmission and a higher breaking strength of the cable. The RJ45 plugs are shielded and equipped with 50µ gold plated copper contacts, to ensure a faultless signal transmission. S/FTP shieldingThe S/FTP shielding (PiMF) of the cable and the shielded RJ45 plugs ensure for a consistently high and loss-free signal transmission. LSZH cable sheath for more safetyThe Low Smoke Zero Halogen (LSZH) cable sheath causes, in the event of a fire, only a very little amount of toxic fumes and low production of smoke in comparison to PVC cables. Therefore the cable are ideal for an indoor installation - they are mandatory in public places. Technical specifications:- Cat. 6A component certified according to ANSI/TIA-568-C.2- Including latch protection (RNS®)- Suitable for 10/100/1000/10000 Base-T Ethernet networks (10GB-compatable)- 500MHz, 10 Gbit/s- 2x shielded RJ45 Cat. 6A plugs- Plugs with 50µ gold plated contacts- SFTP cable (foil & mesh shielding)- PiMF (pairs in metal foil)- Raw cable manufactured according to Cat. 7 requirements- Inner conductor: 4x2xAWG26/7- Conductor material and contacts made from 99,99% oxygen free copper (OFC)- Cable sheath diameter: 6,5 mm- Flame-retardant according to IEC 60332-1- Contacting: 1:1 according to EIA/TIA-568B- Cable length imprinted on grommets- Class EA Channel Link 100% tested (incl. measurement protocol and serial number)- UL certifiedColor: GreyLength: 15 m

It is easy to understand why the classic GBC CombBind is one of the best-selling binders. Whether you want to create a training manual or an internal report, these plastic binders will help you to create elegantly bound, editable documents up to A4 size. The bound pages lie flat for easy writing and photocopying, and it is easy to add or remove pages quickly with a binding device. These binding spines, made of durable plastic, are scratch resistant, shock resistant, colourfast and can be reused over and over again.• Diameter: 6 mm• 21 rings for A4• Up to 25 pages• Black• Pack of 100

It is easy to understand why the classic GBC CombBind is one of the best-selling binders. Whether you want to create a training manual or an internal report, these plastic binders will help you to create elegantly bound, editable documents up to A4 size. The bound pages lie flat for easy writing and photocopying, and it is easy to add or remove pages quickly with a binding device. These binding spines, made of durable plastic, are scratch resistant, shock resistant, colourfast and can be reused over and over again.• Diameter: 10 mm• 21 rings for A4• Up to 65 pages• White• Pack of 100

It is easy to understand why the classic GBC CombBind is one of the best-selling binders. Whether you want to create a training manual or an internal report, these plastic binders will help you to create elegantly bound, editable documents up to A4 size. The bound pages lie flat for easy writing and photocopying, and it is easy to add or remove pages quickly with a binding device. These binding spines, made of durable plastic, are scratch resistant, shock resistant, colourfast and can be reused over and over again.• Diameter: 8 mm• 21 rings for A4• Up to 45 pages• Black• Pack of 100

It is easy to understand why the classic GBC CombBind is one of the best-selling binders. Whether you want to create a training manual or an internal report, these plastic binders will help you to create elegantly bound, editable documents up to A4 size. The bound pages lie flat for easy writing and photocopying, and it is easy to add or remove pages quickly with a binding device. These binding spines, made of durable plastic, are scratch resistant, shock resistant, colourfast and can be reused over and over again.• Diameter: 6 mm• 21 rings for A4• Up to 25 pages• White• Pack of 100

It is easy to understand why the classic GBC CombBind is one of the best-selling binders. Whether you want to create a training manual or an internal report, these plastic binders will help you to create elegantly bound, editable documents up to A4 size. The bound pages lie flat for easy writing and photocopying, and it is easy to add or remove pages quickly with a binding device. These binding spines, made of durable plastic, are scratch resistant, shock resistant, colourfast and can be reused over and over again.• Diameter: 14 mm• 21 rings for A4• Up to 125 pages• White• Pack of 100

It is easy to understand why the classic GBC CombBind is one of the best-selling binders. Whether you want to create a training manual or an internal report, these plastic binders will help you to create elegantly bound, editable documents up to A4 size. The bound pages lie flat for easy writing and photocopying, and it is easy to add or remove pages quickly with a binding device. These binding spines, made of durable plastic, are scratch resistant, shock resistant, colourfast and can be reused over and over again.• Diameter: 12 mm• 21 rings for A4• Up to 95 pages• White• Pack of 100

It is easy to understand why the classic GBC CombBind is one of the best-selling binders. Whether you want to create a training manual or an internal report, these plastic binders will help you to create elegantly bound, editable documents up to A4 size. The bound pages lie flat for easy writing and photocopying, and it is easy to add or remove pages quickly with a binding device. These binding spines, made of durable plastic, are scratch resistant, shock resistant, colourfast and can be reused over and over again.• Diameter: 14 mm• 21 rings for A4• Up to 125 pages• Black• Pack of 100

It is easy to understand why the classic GBC CombBind is one of the best-selling binders. Whether you want to create a training manual or an internal report, these plastic binders will help you to create elegantly bound, editable documents up to A4 size. The bound pages lie flat for easy writing and photocopying, and it is easy to add or remove pages quickly with a binding device. These binding spines, made of durable plastic, are scratch resistant, shock resistant, colourfast and can be reused over and over again.• Diameter: 10 mm• 21 rings for A4• Up to 65 pages• Black• Pack of 100

It is easy to understand why the classic GBC CombBind is one of the best-selling binders. Whether you want to create a training manual or an internal report, these plastic binders will help you to create elegantly bound, editable documents up to A4 size. The bound pages lie flat for easy writing and photocopying, and it is easy to add or remove pages quickly with a binding device. These binding spines, made of durable plastic, are scratch resistant, shock resistant, colourfast and can be reused over and over again.• Diameter: 12 mm• 21 rings for A4• Up to 95 pages• Black• Pack of 100

The brightness sensor for your alarm control unitThe LUPUSEC light sensor reports the brightness value at the installation location to the control panel. This information can help you create automations controlled by brightness levels, for example automatically raising the roller blinds during the day or lowering the blinds when there is too much direct sunlight.