340 products were found matching your search for spacer in 2 shops:

The spacers are fitted between the mainboard and the enclosure mainboard support. The external thread is an imperial thread. Internal thread is for M3 screws.

Spare rubber round with spacer ring. Silicone straps are super elastic, with high clamping and restoring force.

Plastic spacer blocks with snap-lock fastening

Plastic spacer blocks with snap-lock fastening

Plastic spacer blocks with snap-lock fastening

The NA-IS1-14 Sx2 set consists of two 5-mm thick spacers for suction operation, which can be mounted on the inlet side of Noctua 140x25-mm fans. In applications where the fan draws in through obstacles such as grids, perforated plates, mesh panels, filters or radiators, this can often improve both the acoustics and the flow rate. The additional distance between the fan and the obstacle means that the NA-IS1 spacers reduce turbulence in the inflow, which, depending on the application and fan model, can not only increase the volume flow, but also often reduces the sound pressure level and makes the running noise more pleasant for your ears. Since the NA-IS1-14 replaces the NA-AVP1 anti-vibration pads pre-mounted on the fan, they are compatible with all current Noctua 140x25-mm fans with a square frame and are also easy to mount.

The NA-IS1-12 Sx2 set consists of two 5-mm thick spacers for suction operation, which can be mounted on the inlet side of Noctua 120x25-mm fans. In applications where the fan draws in through obstacles such as grids, perforated plates, mesh panels, filters or radiators, this can often improve both the acoustics and the flow rate. The additional distance between the fan and the obstacle means that the NA-IS1 spacers reduce turbulence in the inflow, which, depending on the application and fan model, can not only increase the volume flow, but also often reduces the sound pressure level and makes the running noise more pleasant for your ears. Since the NA-IS1-12 replaces the NA-AVP1 anti-vibration pads pre-mounted on the fan, they are compatible with all current Noctua 120x25-mm fans with a square frame and are also easy to mount.

The NA-IS1-14 Sx2 set consists of two 5-mm thick spacers for suction operation, which can be mounted on the inlet side of Noctua 140x25-mm fans. In applications where the fan draws in through obstacles such as grids, perforated plates, mesh panels, filters or radiators, this can often improve both the acoustics and the flow rate. The additional distance between the fan and the obstacle means that the NA-IS1 spacers reduce turbulence in the inflow, which, depending on the application and fan model, can not only increase the volume flow, but also often reduces the sound pressure level and makes the running noise more pleasant for your ears. Since the NA-IS1-14 replaces the NA-AVP1 anti-vibration pads pre-mounted on the fan, they are compatible with all current Noctua 140x25-mm fans with a square frame and are also easy to mount.

Plastic spacer blocks with snap-lock fastening

Spacer screw for wood-wood, Countersunk head, 6.0 x 70, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 100 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0600702-1GTIN/EAN: 4005674013468Diameter d: 6 mmLength L: 70 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head

Spacer screw for wood-wood, Countersunk head, 6.0 x 90, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 100 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0600902-1GTIN/EAN: 4005674013482Diameter d: 6 mmLength L: 90 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head

Spacer screw for wood-wood, Countersunk head, 6.0 x 80, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 100 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0600802-1GTIN/EAN: 4005674013475Diameter d: 6 mmLength L: 80 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head

Spacer screw for wood-wood, Countersunk head, 6.0 x 60, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 100 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0600602-1GTIN/EAN: 4005674403276Diameter d: 6 mmLength L: 60 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head

Spacer screw for wood-wood, Countersunk head, 6.0 x 50, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 100 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0600502-1GTIN/EAN: 4005674013451Diameter d: 6 mmLength L: 50 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head

Spacer screw for wood-wood, Countersunk head, 6.0 x 110, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 50 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0601109-1GTIN/EAN: 4005674013505Diameter d: 6 mmLength L: 110 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head

Spacer screw for wood-wood, Countersunk head, 6.0 x 100, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 50 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0601009-1GTIN/EAN: 4005674013499Diameter d: 6 mmLength L: 100 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head

Spacer screw for wood-wood, Countersunk head, 6.0 x 120, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 50 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0601209-1GTIN/EAN: 4005674013512Diameter d: 6 mmLength L: 120 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head

Spacer screw for wood-wood, Countersunk head, 6.0 x 160, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 50 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0601609-1GTIN/EAN: 4005674013543Diameter d: 6 mmLength L: 160 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head

Spacer sleeves

Spacer screw for wood-wood, Countersunk head, 6.0 x 145, Partial thread (L1), TX 25, Steel, zinc plated, blue passivated, 50 Pcs.DESCRIPTIONSpacer screw for wood-woodPRODUCT FEATURES:TXExcellent power transmissionNo slippingSecure processingCountersunk head with milling ribsMilling ribs ensure effective milled recessing of the head in the materialFlush countersinkingThread under headNo creaking or wobbling of the wood connectionSecure hold and permanent fix Increasing the head pull-through resistanceSingle-start threadHigh load-bearing capacityCutting pointPre-drills and minimises splitting of the materialImmediate screw startFIELDS OF APPLICATION:Distance correction of wood connections and substructures in indoor applications.Roof extension, interior construction, renovationsPROCESSING RECOMMENDATIONS:Corrections can be made after screwing by twisting the screw back.FEATURESArticle number: 000197S121-0601459-1GTIN/EAN: 4005674013536Diameter d: 6 mmLength L: 145 mmDrive: TX 25Thread type: Partial thread (L1)Head shape: Countersunk head