5187 products were found matching your search for switching in 1 shops:

NETGEAR GS108 switch — 8 connections — EN, Fast EN, Gigabit EN — 10Base-T, 100Base-TX, 1000Base-T• Device type: switch• Type: external• Width: 15.8 cm• Depth: 10.5 cm• Height: 2.7 cm• Weight: 0.9 kg• Expansion/connectivity • Interfaces: 8 x network — Ethernet 10BASE-T/100BASE-TX/1000BASE-T — RJ-45Network• No. of Connections: 8 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T• Data transfer rate: 1 Gbps• Data link protocol: Ethernet, fast Ethernet, gigabit Ethernet• Connection technology: wired• Communication mode: half-duplex, full-duplex• Switching-Protokoll: Ethernet• Size of the MAC address table: 8000 entries• Status indicator: link activity, collision status, connection transfer speed, connection duplex mode, power supply, link OK Features:• Full-duplex capability, automatic detector per device, auto uplink Product certifications:• IEEE 802.3U, IEEE 802.3i, IEEE 802.3zMiscellaneous:• Mounting kit: included for wall mounting• MTBF: 87,600 hour(s) Power supply• Power supply: external power supply unit Power consumption during operation:• 14.4 W Software/system requirements• Required operating system: Apple MacOS, Novell NetWare, Linux, Microsoft Windows

Product description: NETGEAR GS105 switch — 5 connections — EN, Fast EN, Gigabit EN — 10Base-T, 100Base-TX, 1000Base-TThis switch is a high-performance Gigabit copper switch.It is an easy way to upgrade an existing network to transfer speeds of 1000 Mbit/s via category-5 cable (Cat 5). Five 1000BASE-T full duplex ports dramatically increase the performance of your network. It can be used both in traditional Fast Ethernet networks as well as in Gigabit networks. • 5 Gigabit Ethernet ports with 10/100/1000 MBit/s • All ports support auto-negotiating and auto uplink • Silent operation, as there is no fan

Programmable DC switching power supply by PEAKTECH.This switching power supply by PEAKTECH is ideal for continuous inspection tasks in production and manufacturing as well as for use in research and development laboratories. It features 9 freely programmable memory units for different voltages and currents that can be recalled at any time. A further 10 programmed voltage and current values and time intervals can be saved for retrieval at any time via the keyboard or a connected PC. Connection to PC via RS-232 or RS-485 interface, cooling via heat-controlled fan. Up to 32 power supply units can be controlled by one PC.- 1 - 40 V DC/0 - 5 A DC- 4-digit multifunction LCD display (48x66 mm) with backlight, +/- 1.5% + 2 digits- Control voltage and control current display with automatic switchover- Windows software for recording and storing data and test results- Safety: IEC-1010-1Includes RS-232 cable and user manual.

"PROeco II switching power supplies, single-phaseSolve your power supply problem cost-effectivelyPROeco combines all the basic functions in a compact formThe second generation PROeco power supplies maximise the availability of automation applications. The twelve-unit series covers standard functionalities with high performance, efficiency and easy system integration. The three-colour LED makes service activities easier and makes the integration of the PROeco devices incredibly simple. The series is compatible with DC UPSs, electronic load monitors and diode modules and is suitable for building power management systems. The compact design is suitable for applications where space is limited, such as low-profile control cabinets.Technical dataOutput voltage/nominal output current: 24 V DC/40.0 AInput voltage range AC/input voltage range DC: 85 - 264 V AC/110 - 370 V DC Min./max. clamping range/input/output: 0.18 - 6.0 mm²/0.5 - 16.0 mm²/screwDesign: single-phase"

"PROeco II switching power supplies, three-phaseSolve your power supply problem cost-effectivelyPROeco combines all the basic functions in a compact formThe second generation PROeco power supplies maximise the availability of automation applications. The twelve-unit series covers standard functionalities with high performance, efficiency and easy system integration. The three-colour LED makes service activities easier and makes the integration of the PROeco devices incredibly simple. The series is compatible with DC UPSs, electronic load monitors and diode modules and is suitable for building power management systems. The compact design is suitable for applications where space is limited, such as low-profile control cabinets.Technical dataOutput voltage/nominal output current: 24 V DC/5 AInput voltage range AC/input voltage range DC: 3 x 320 - 3 x 575 V AC/450 - 800 V DCMin./max. clamping range/input/output: 0.18 - 6.0 mm²/0.5 - 6.0 mm²/screwDesign: three-phase"

"PROmax switching power supplies, three-phasePowerful power supply for machinery and plantsPROmax opens up versatile solutions for challenging automation applicationsPowering large machinery and plants is a particular challenge because failures due to equipment defects affect the entire production line and can result in high costs. In addition, intensive torque loads place additional demands on the power supply. The powerful, durable PROmax switching power supplies are designed for challenging tasks and deliver high boosting capability and full performance in wide temperature ranges. PROmax supplies the energy required for overloads - even at high temperatures. Even longer-term overloads of up to 120%/min or short-term peak loads of 300% can easily be covered by the PROmax. Switching power supplies from Weidmüller can be used all around the world and, thanks to their small width, can also be used in confined spaces.Technical dataOutput voltage/nominal output current: 24 V DC/40.0 AInput voltage range AC/input voltage range DC: 3 x 320 - 575 V AC/450 - 800 V DCMin./max. clamping range/input/output: 0.22 - 6.0 mm²/0.5 - 16.0 mm²/screwDesign: three-phase"

"PROeco II switching power supplies, single-phaseSolve your power supply problem cost-effectivelyPROeco combines all the basic functions in a compact formThe second generation PROeco power supplies maximise the availability of automation applications. The twelve-unit series covers standard functionalities with high performance, efficiency and easy system integration. The three-colour LED makes service activities easier and makes the integration of the PROeco devices incredibly simple. The series is compatible with DC UPSs, electronic load monitors and diode modules and is suitable for building power management systems. The compact design is suitable for applications where space is limited, such as low-profile control cabinets.Technical dataOutput voltage/nominal output current: 24 V DC/10.0 AInput voltage range AC/input voltage range DC: 85 - 264 V AC/110 - 370 V DC Min./max. clamping range/input/output: 0.18 - 6.0 mm²/0.5 - 6.0 mm²/screwDesign: single-phase"

"The PSP-Series are single output, 200W, programmable switching DC power supplies. OVP, OCP, OTP, and OPP protect the PSP-Series and its loads from unexpected conditions. The PSP-Series have large LCD panel do display output and parameter simutaneously and a key lock feature to prevent changing the settings. The PSP-Series is suitable for generic bench-top applications in laboratories and educational institutions.FeaturesLCD displayOutput On / off controlOutput voltage: 0 - 40 V DCOutput current: 0 - 5 A3-Stage fan regulationsVoltage / current / power adjustablekey lockOVP, OCP & OPP protectionNormal, +% & -% output operatorHigh efficiency andhigh power densityStandard Interface:RS-232Cdelivery contentpower supply, manual, power cord, measurment cables"

"The SPS-Series are single output, 360W, switching DC power supply. OVP protects the SPS-Series and their load from unexpected conditions. High regulation is maintained at 0.01%. Remote sensing adds extra level of precision by compensating cable losses between loads. Turning the output On/Off from external device is available through remote control terminals. The SPS-Series are an ideal solution for power-efficient bench-top or portable applications requiring high regulation.FeaturesDual measurement display 0,01 % high resolutionOutput voltage: 0 - 36 V DCOutput current: 0 - 10 AConstant voltage and constant current operationhigh Effizienzhigh power densityhigh voltage protection ON/OFF Steuerungdelivery contentpower supply, power cord, measurment cables, manual"

Number of teeth: 20Operating angle: 18°With ball lockHAZET 2-component handleSurface: Chromed, polished headDIN 3122, ISO 3315Made In GermanyOutput: Square 6,3 mm (1/4 inches)Dimensions / Length:115 mm Net weight (kg): 0.07 kg For manual operation

Number of teeth: 32Operating angle: 11.25°With ball lockHAZET 2-component handleSurface: Chromed, polishedDIN 3122, ISO 3315Made In GermanyOutput: Square 12,5 mm (1/2 inches)Dimensions / Length:275 mm Net weight (kg): 0.57 kg For manual operation

"Single-wall Z-Wave dimmerHeatit ZM Dimmer is a 250W dimmer suitable for use with LED lights and other light sources. The dimmer works with most low loads without causing flicker. The dimmer allows the user to control light sources from the Z-Wave network and/or an external switch. Heatit ZM Dimmer is a built-in dimmer for installation in European electrical wall boxesFlush-mounted dimmer: For 2- or 3-wire installations, power 5 W - 250 WCompatible lamp types: LED, incandescent and halogenSafety functions: Overload, short-circuit, overvoltage and overheating protectionIntelligent control: SmartStart Scene Controller, Z-Wave 800 chip, encryption-capable (S0, S2)External operation: connection for up to two external switches, adjustable min/max dimming levelThe Heatit ZM dimmer works on most low loads of LEDs and other lights without causing flickering. Two switching inputs & wireless scene controlThe dimmer has 2 switch inputs that can be used as scene controllers in addition to controlling the dimmer.The dimmer can be connected wirelessly to other devices via associations. Heatit ZM Dimmer has active power measurement and provides real-time information about your power consumption."

"Switch panel relay, single channel with extension inputIntended useFor switching lights and motorsOperated using the appropriate attachmentFor controlling electric underfloor heating and electrothermal actuators in combination with a room temperature controller attachmentMounting in an appliance socket with dimensions according to DIN 49073Product featuresIt is possible to connect extensions.Adjustable post-run timeTest mode to test the functionAdaptive zero-point switching"

"Switch panel electronics, single channel with extension inputIntended useOperated using the appropriate attachmentMounting in an appliance socket with dimensions according to DIN 49073Operation with neutral conductor:For switching light bulbs, HV halogen bulbs, electronic or inductive transformers with halogen or LED bulbs, switchable or dimmable HV LED or compact fluorescent bulbsOperation without neutral conductor:For switching light bulbs, HV halogen bulbs, electronic or inductive transformers with halogen or LED bulbs, dimmable HV LED or compact fluorescent bulbsProduct featuresSwitch on by means of light-saving soft startIt is possible to connect extensions.Electronic short-circuit protection with permanent shutdown after no later than seven secondsElectronic overtemperature protectionTest mode to test the functionOperation with neutral conductor:The device is supplied via phase conductors and neutral conductors, meaning there is no leading edge or trailing edgeOperation without neutral conductor:The device is supplied by the external conductor and the connected load and therefore operates in the leading edge or trailing edge principleAutomatic or manual setting of the operating mode suitable for the loadLED display of the set operating mode"

"Switch panel relay, dual channel with extension inputIntended useFor switching lights and motorsOperated using the appropriate attachmentMounting in an appliance socket with dimensions according to DIN 49073Product featuresIt is possible to connect extensions.Test mode to test the functionIn combination with LB-Management dual pushbuttons:Two independent outputsTime function can be set for output a2In combination with LB-Management single pushbuttons, LB-Management timer display, LB-Management motion detector:Output a2 switches in relation to output a1, e.g., to switch on ventilation in relation to the lighting and to switch it off with a delay.Switch-on delay can be set for output a2Switch-off delay can be set for output a2In combination with 3-wire extension and LB management dual pushbuttons:Two independent outputsIn combination with 2-wire extension, rotary extension or pushbutton:Output a2 switches in relation to output a1, e.g., to switch on ventilation in relation to the lighting and to switch it off with a delay"

"InLine® switch for switching chassis fan on and off, with 3 pin connector and speed signalOpening size for switch ca. 20x14mmCable length ca. 2x 25cm"

"LCM-_: built-in dimming function (external voltage 1...10V DC, PWM)Plastic enclosure IP20Overload protection, current limiting, auto recoveryProtections: short circuit/over load/over voltageBuilt-in active PFC functionInsulation Class IISuitable for LED lighting and moving sign applicationsConstant current selectable by DIP switchEN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13, EN61547 Criteria Aoutput voltage: 6 - 50 V DCoutput current: 350/500/600/700/900/1050 mApower: 25,2 WRipple&Noise: 400 mVppefficiency: 86%dimensions: 105 x 68 x 23 mm / 160 g"

"FeaturesConstant PowerIndependent power supplyWide input rangeMetal housingOverload protection: constant current limiting, auto recoveryProtections: short circuit, over load, over voltage, over temperatureBuilt-in active PFC functionLow no load power consumptionSuitable for LED lighting applicationsSELVSafety standards: EN61347-1, EN61347-2-13, EN62384 and moreEMC standards: EN55015, EN61000-3-2 Class C, EN61000-3-3, EN61547 and moreSurge Immunity Level 6kVIP67, current adjustable through built-in potentiometer, dimming via executed control line, 3 in 1 dimming function (0...10V DC, 10V PWM, potentiometer)"

"FeaturesConstant PowerIndependent power supplyWide input rangeMetal housingOverload protection: constant current limiting, auto recoveryProtections: short circuit, over load, over voltage, over temperatureBuilt-in active PFC functionLow no load power consumptionSuitable for LED lighting applicationsSELVSafety standards: EN61347-1, EN61347-2-13, EN62384 and moreEMC standards: EN55015, EN61000-3-2 Class C, EN61000-3-3, EN61547 and moreSurge Immunity Level 6kVIP67, current adjustable through built-in potentiometer, dimming via executed control line, 3 in 1 dimming function (0...10V DC, 10V PWM, potentiometer)"

"Wi-Fi Smart 2-channel switch module, Tuya compatibleTurn your switches into wireless, controllable devicesControl via an existing Wi-Fi network with the free Smart Life or Megos Smart Home appTuya compatible, supports Amazon Alexa and Google HomeInput: AC 90-230 V/10 A, 50/60 HzOutput: 150 W channelOutput connection: terminal blockInstallation: flush mountingSystem requirements: Android 5 or higher / iOS 11 or higherDesign your smart home! Turn your switches into wireless and app-controllable devices.Scope of delivery:1x switch actuator1x user manual"