10856 products were found matching your search for voltage in 3 shops:

Application: Voltage testingStandard: ISO 57680/6 and VDE 0680/6 for 150 to 250 V

SOSU Cosmetics Eye Voltage Eyeliner Pen, 1 pc, Eyeliner for Women, Do you want to accentuate your eye contours and draw attention to your eyes? SOSU Cosmetics Eye Voltage Eyeliner Pen will help you do just that. It gives your look additional intensity and drama, accentuating the effects of any additional makeup products. Its easy-to-apply texture allows you to line your eyes precisely with bold, rich colour in just one stroke, framing your eyes perfectly and enhancing their beauty. No matter the occasion, it makes it quick and easy to achieve a perfect makeup look that lasts. Characteristics: rich and intense colour smudge-resistant liners draws precise lines matte look easy to apply – also suitable for beginners has a quick-drying formulation Ingredients: vegan product How to use: Draw the liner gently across the eyelid. Leave to dry.

The new TechnoSatin Gel Lipstick is the perfect combination of art and science. The pleasant and weightless formulation coats the lips with intense color and provides 24-hour moisture - for a silky, shiny finish. Thanks to the innovative Stretch-Flex technology, lips are coated with a long-lasting, weightless layer of color and pampered with maximum comfort. The formulation contains over 68% nourishing ingredients, such as Benibana oil, which nourishes the lips and leaves them feeling comfortable and hydrated. Available in 15 different shades, whose names are inspired by our technological age as well as SHISEIDO's enduring passion for science and innovation. Full coverage. Silky glossy finish. Long-lasting color. 24 hours of moisture. Dermatologically tested. Application: The product can be applied directly to the lips. When doing so, use the angled tip of the lipstick to define the lip contour. This will give you an immediate, intense color effect.

60-W Magnastat mains voltage soldering iron with non-twist guard. The Magnastat system works by means of a permanent magnet and a ferro-magnetic temperature sensor. If the soldering tip is cold, the permanent magnet is pulled by the ferro-magnetic temperature sensor. When this happens, the switch is closed and the heating is switched on. When the temperature sensor approaches its Curie point, i.e. the selected tip temperature, its magnetic behaviour changes and the heating is switched off. If the tip cools slightly, the temperature sensor pulls again and the control circuit starts afresh. The working temperature is chosen by simply changing the soldering tip with the one attached to its temperature sensor. The Weller longlife soldering tips cover the temperature ranges 260°C, 310°C, 370°C, 425°C and 480°C.The soldering iron is supplied with the following tip: CT5C7.Replacement tips for 370°C can be found under ''TOP CT5...''.

Shiseido Makeup Technosatin gel lipstick, 4 g, Lipsticks for Women, Beautifully accentuated lips never go out of style. The Shiseido Makeup Technosatin gel lipstick lipstick envelops the surface of your lips in a continuous layer of irresistible and rich colour, accentuating any makeup look perfectly, whether you’re heading to work, a meeting or a party. It allows you to emphasise your lips while also giving them the shape you want or a fuller look. In just a moment, it will give your lips a gorgeous colour and perfect shape, making them the centre of attention and irresistibly kissable. Characteristics: high pigmentation give lips a fine gloss moisturises and cares for your lips How to use: Apply lipstick to lips from the centre to the corners using gentle strokes.

The NA-VC1 is a sophisticated, premium grade 24-V DC to 12-V DC step-down voltage converter that allows running standard 12-V fans in 24-V environments such as 3D printers or industrial and automotive applications. Its neat, ultra-compact and lightweight design makes it easy to integrate into virtually any environment. Compatible with both 4-pin PWM and 3-pin fans, the NA-VC1 channels RPM and PWM signals for speed monitoring and PWM-based speed control (4-pin fans only). At the same time, it adjusts output with input voltage for voltage-based speed control. Supporting a total output power of 9 W, the NA-VC1 can run multiple fans using the optional NA-SYC1 splitter cables or NA-FH1 fan hub. For speed controlling PWM fans, it can be nicely combined with the optional NA-FC1 fan controller. With a maximum operating temperature of up to 60°C, integrated protection against short-circuits, reverse polarity, overcurrent and overheating (automatic shutdown), the NA-VC1 is as bulletproof as a voltage converter can be.

Over-voltage protection module Over-voltage protectionEasy to installation and removalLED indicator - allows users to see the status of their equipmentThe EA2100 over-voltage protection module prevents damage to equipment from surges and spikes once installed in a PDU. The integrated over-voltage protection includes an LED indicator allowing the user to see the status of their equipment.Included in delivery:1x over-voltage protection module1x user guide

Blade nickel-plated, fully insulated blade conforming to DIN VDE 0680-6 4615 3 with metal clip and yellow cap No. 4615 3 with metal clip and yellow cap

The voltage tester in accordance with VDE 0680 from PROXXON. Displays the phase voltage 220 - 250 V, 50/60 Hz (up to 500 Hz). Made from high-strength ABS, with a textured, grippy surface. Tested piece by piece at 2000 V. Nickel-plated blade 0.5 x 3.0 mm, hardened throughout. Spring steel clip for breast pocket. Blade length: 60 mm. Total length: 140 mm.

The PCI Express card by Delock expands a PC by one external serial port. Connected devices can be optionally supplied with a voltage of 5 V or 12 V. By using the included low profile bracket, the PCI Express card can be also installed into a Mini-PC. Specification Connectors: external: 1 x serial RS-232 DB9 male internal: 1 x PCI Express x1, V2.0 1 x SATA 15 pin plugChipset: SUN2212Data transfer rate up to 115.2 KbpsFIFO: 128 byteCompatible with 16C950 UART±15 kV ESD protection for all serial signals meets IEC1000-4-2 standardSignals: DCD/12V/5V, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI/12V/5V5 V or 12 V can be set individually through the jumper (pin 1 or 9)Windows WHQL certifiedSystem requirements Linux Kernel 2.6.x or aboveWindows Server 2008 R2/Server 2012/Server 2012 R2/Server 2016Windows 7/7-64/8.1/8.1-64/10/10-64PC with one free PCI Express slotPower supply with a free SATA power connectorPackage content PCI Express cardLow profile bracketDriver CDUser manualPackage Retail Box

Self-adhesive warning labels in accordance with DIN 4844Contents: 10 labels

Self-adhesive warning labels in accordance with DIN 4844Contents: 10 labels

The new Fluke voltage and continuity testers with the latest measurement and safety/security technology are now even more stable and user-friendly than ever before. They simplify your work and offer the best combination of security, ease of use and direct notifications in all work situations.• Safety specification: CAT III 690 V, CAT IV 600 V, HSE GS 38 (probes), IEC EN 61243-3: 2010• LED display• A continuity test with audible signal and vibration emitter for tactile feedback• Measured value display with backlight• Tactile feedback from vibration emitter• Battery voltage display• Voltage detection even when batteries are discharged• Improved accommodation of the test probes for secure storage• Rotating field indicator for three-phase systems• Function to check RCDs. Connection of a load using two-button operation offers the possibility to draw a higher current from the circuit to be measured and to trigger residual current devices (RCDs).• Built-in electric flashlight• Rapid determination of live conductors using a single-pole phase test• Slide-on probes, guard for test probes and accessories for storage• Guard for test probes and accessories for storage. With the guard you always have one hand free when opening the safety sockets.• Detection of damaged test leads with WearGuard™ insulationTechnical data:AC and DC voltage: 12 V - 690 VContinuity test: 0 - 400 kOFrequency measurement: 0 / 40 - 400 HzPhase rotation direction: 100 V - 690 VResponse time (LEDs): 200 k ohm input impedance: power consumption 3.5 mA at 690 V / Current consumption 1.15 mA at 230 V7 K ohm input impedance (engaged load): Power consumption 30 mA at 230 VSafety specification: CAT III 690 V, CAT IV 600 VIP specification: IP64Power supply: 2 AA batteriesNet weight: 280 gDimensions (L x W x H): 26 x 7 x 3.8 cm

The new Fluke voltage and continuity testers with the latest measurement and safety/security technology are now even more stable and user-friendly than ever before. They simplify your work and offer the best combination of security, ease of use and direct notifications in all work situations.• Safety specification: CAT III 690 V, CAT IV 600 V, HSE GS 38 (probes), IEC EN 61243-3: 2010• LCD and LED display• A continuity test with audible signal and vibration emitter for tactile feedback• Backlit reading display• Tactile feedback from vibration emitter • Battery voltage display• Voltage detection even when batteries are discharged• Improved accommodation of the test probes for secure storage• Rotating field indicator for three-phase systems• Function to check RCDs. Connection of a load using two-button operation offers the possibility to draw a higher current from the circuit to be measured and to trigger residual current devices (RCDs).• Keep the reading on the display • Built-in electric flashlight • Rapid determination of live conductors using a single-pole phase test• Slide-on probes, guard for test probes and accessories for storage• Guard for test probes and accessories for storage. With the guard you always have one hand free when opening the safety sockets.• Resistance measurement up to 1999 ohm• Detection of damaged test leads with WearGuard™ insulationTechnical data:DC and AC voltage: 6 V - 690 VContinuity test: 0 - 400 kOFrequency measurement: 0 / 40 - 400 HzPhase rotation direction: 100 V - 690 VResistance measurement: up to 1999 ohmResponse time (LEDs): 200 k ohm input impedance: power consumption 3.5 mA at 690 V / current consumption 1.15 mA at 230 V7 k ohm input impedance (engaged load): power consumption 30 mA at 230 VSafety specification: CAT III 690 V, CAT IV 600 VIP specification: IP64Power supply: 2 AA batteriesNet weight: 280 gDimensions (L x W x H): 26 x 7 x 3.8 cm

The new Fluke voltage and continuity testers with the latest measurement and safety/security technology are now even more stable and user-friendly than ever before. They simplify your work and offer the best combination of security, ease of use and direct notifications in all work situations.• Safety specification: CAT III 690 V, CAT IV 600 V, HSE GS 38 (probes), IEC EN 61243-3: 2010• LCD and LED display• A continuity test with audible signal and vibration emitter for tactile feedback• Backlit reading display• Tactile feedback from vibration emitter• Battery voltage display• Voltage detection even when batteries are discharged• Improved accommodation of the test probes for secure storage• Rotating field indicator for three-phase systems• Function to check RCDs. Connection of a load using two-button operation offers the possibility to draw a higher current from the circuit to be measured and to trigger residual current devices (RCDs).• Keep the reading on the display• Built-in electric flashlight• Rapid determination of live conductors using a single-pole phase test• Slide-on probes, guard for test probes and accessories for storage• Guard for test probes and accessories for storage. With the guard you always have one hand free when opening the safety sockets.• Detection of damaged test leads with WearGuard™ insulationTechnical data:DC and AC voltage: 6 V - 690 VContinuity test: 0 - 400 kOFrequency measurement: 0 / 40 - 400 HzPhase rotation direction: 100 V - 690 VResponse time (LEDs): 200 k Input impedance: power consumption 3.5 mA at 690 V/ current consumption 1.15 mA at 230 V7 K? Input impedance (engaged load): power consumption 30 mA at 230 VSafety specification: CAT III 690 V, CAT IV 600 VIP specification: IP64Power supply: 2 AA batteriesNet weight: 280 gDimensions (L x W x H): 26 x 7 x 3.8 cm

Self-adhesive warning labels in accordance with DIN 4844Contents: 10 labels

Self-adhesive warning labels in accordance with DIN 4844Contents: 10 labels

The output voltage or output current can be separately regulated for the DC output and AC output. AC output with current limit and electronic overload protection.Blue 14 mm LED displays: ± 1.0% accuracy + 2 digitsOperating voltage: 230 V AC(W x H x D): 380 x 140 x 300 mm/12 kgSafety: EN 61010-1Accessories: mains cable and user manualDC output voltage: 0 ~ 30 VAC output voltage: 0 ~ 30 VDC output current: 0 ~ 6 AAC output current: max. 6 ADC residual ripple: 1 mVrms/3 mArms

NaniNails NANI Amazing Line, 5 ml, Nail Varnishes for Women, A gorgeous manicure as though you’d just left the nail salon? The NaniNails NANI Amazing Line nail polish lets you achieve it in the comfort of your own home. It coats the surface of the nail with a continuous layer of long-lasting, intense colour with a glossy finish, helping to give your nails a manicured, perfectly groomed look. You can use it to accentuate your nails or perhaps to enhance your outfit and style. So which colour will you choose to make your nails pop? Characteristics: bright, rich colour ensures a high gloss easy to apply use only with a LED nail lamp resistant to rubbing and flaking off How to use: Apply the polish using a brush for polish-free, degreased nails. For best results, apply two layers.

The MCC 118 and MCC 128 DAQ HATs provide eight channels of analog voltage measurement for Raspberry Pi-based data acquisition systems. Each device has a maximum sampling rate of 100 kS/s for single-point or waveform voltage measurements. Up to eight MCC HATs can be stacked on a Raspberry Pi for up to 64 channels of data and a maximum throughput of 320 kS/s.MCC 118 features 12-bit resolution and 8 SE analog inputs with an input range of +/-10 V.Features8 single ended 12-bit voltage inputsMaximum sampling rate 100 kS/s (320 kS/s for stacked cards)+/-10 V input rangeOnboard sample buffers enable high speed acquisitionexternal sampling clock I/Oexternal digital trigger inputScrew terminal connectionsAll DAQ HATs include C/C++® and Python™ examples and an open source library. Comprehensive API and hardware documentation is also provided.Up to eight MCC HATs can be stacked on a Raspberry Pi-.Scope of delivery1 MCC DAQ HAS MCC1282x 20 header connector (plugs into the 40-pin GPIO connector on the Pi board)jumpers (3)spacers (4)screws (4)nuts (4)dedprinted insert: Getting started with MCC DAQ HATsMCC packaging unit/foam, etc.NoteThe Raspberry Pi is not included in the scope of delivery.