921 products were found matching your search for wiring in 1 shops:

Wiring pliers for gripping, bendingand stripping insulation from wires from 0.5 - 0.75/1.5and 2.5 mm² as well as for crimpingwire end ferrules 0.75/1.5/2.5mm².

RVS-3PHAS+N/125, wiring bridge, rigid, 3p+N, 125 mm

RVS-3PHAS/125 wiring bridge, rigid, 3p, 125 mm

VALUE wiring tool LSA plusWiring tool for LSA-plus IDC connectorsCut through the insulation, press in the wire, make contact and cut off the protruding end in one operationFold-out pull hook and release bladeWire diameter: 0.4 to 0.8 mm

Wiring bridgeH07VK 6 mm²,With cable lug on both sides dia. 5.2 mm,Length: 250 mm

Wiring bridgeH07VK 6 mm²,With cable lug on both sides,Length: 123 mm

BP83N assembly package, consisting of: Cross-wiring control cable 7-pin cable and terminalWithout upper connection compartment terminalW x H x D: 133 x 107 x 58 mmAccessories for meter cabinet ABN

The V6K series (RAL7030) ducts are made from PVC and have the following characteristics:RoHS compliantUL and CSA approvalVDE approvalDIN base perforations from a width of 80 mm, three-trackNon-slip cover thanks to rubber lip inside the coverWire retention tabs on the strut to prevent any wires already laid from slipping outPredetermined breaking point of the horizontal strut in the base. It is therefore possible to have transitions from vertical tracks to horizontal ducts as far as the baseRigid struts in the base give the duct additional stabilityThe upper edges of the strut are deburredThe predetermined breaking point at the end of the strut allows the struts to be easily broken off for larger cross-sectionsFrom a width of 60 mm, mounting lugs for cable ties are in the base, so that wiring harnesses can be bundled and strain relief is possible

The channels of the V6K series are made of PVC and have the following characteristics:RoHS compliantUL and CSA approvedVDE approvalDIN bottom holes from width 80 mm three-trackNon-slip lid thanks to the rubber lip on the inside of the lidWire retention lugs on the web to prevent slipping of already laid wiresPredetermined breaking point of the crossbar in the floor. This makes it possible for the transitions from longitudinal tracks to transversely routed channels to the groundStiffening bars in the bottom, giving the channel more stabilityTop edges of the web are terminatedPredetermined breaking point on the web attachment, allows the web to be easily broken out for larger cross-sectionsFrom a width of 60 mm, the fastening eyelet for cable ties in the floor, so that cable harnesses can be bundled and strain relief is possible

The DIN PVC wiring ducts (RAL7030) have the following characteristics:RoHS compliantUL and CSA approvalDIN base perforations from a width of 75 mm, three-trackOptimum fit of the cover that is vibration resistant, easy assembly and disassemblyWire retention tabs on the strut from a height of 37.5 mm to prevent any wires already laid from slipping outThe upper edges of the strut are deburredStiffening bars in the base give the duct extra stability, and cable supports and dividers can be mounted on themThe predetermined breaking point at the end of the strut allows the struts to be easily broken off for larger cross-sectionsDouble-sided adhesive tape on the base for fixing when attaching the duct

The DIN wiring ducts made of PVC (RAL7030) have the following characteristics:RoHS compliantUL and CSA approvedDIN bottom holes from width 75 mm three-trackOptimal lid seat Vibration-resistant, easy assembly and disassemblyWire retention lugs on the web from height 37.5 mm to prevent slipping out of already laid wiresTop edges of the web are terminatedStiffening bars in the floor, give the channel more stability and can be used to mount cable holders and separation barsPredetermined breaking point on the web attachment, allows the web to easily break out for larger cross-sectionsDouble-sided adhesive tape on the floor for fixation during attachment

The DIN PVC wiring ducts (RAL7030) have the following characteristics:RoHS compliantUL and CSA approvalDIN base perforations from a width of 75 mm, three-trackOptimum fit of the cover that is vibration resistant, easy assembly and disassemblyWire retention tabs on the strut from a height of 37.5 mm to prevent any wires already laid from slipping outThe upper edges of the strut are deburredStiffening bars in the base give the duct extra stability, and cable supports and dividers can be mounted on themThe predetermined breaking point at the end of the strut allows the struts to be easily broken off for larger cross-sectionsDouble-sided adhesive tape on the base for fixing when attaching the duct

The DIN wiring ducts made of PVC (RAL7030) have the following characteristics:RoHS compliantUL and CSA approvedDIN bottom holes from width 75 mm three-trackOptimal lid seat Vibration-resistant, easy assembly and disassemblyWire retention lugs on the web from height 37.5 mm to prevent slipping out of already laid wiresTop edges of the web are terminatedStiffening bars in the floor, give the channel more stability and can be used to mount cable holders and separation barsPredetermined breaking point on the web attachment, allows the web to easily break out for larger cross-sectionsDouble-sided adhesive tape on the floor for fixation during attachment

The DIN PVC wiring ducts (RAL7030) have the following characteristics:RoHS compliantUL and CSA approvalDIN base perforations from a width of 75 mm, three-trackOptimum fit of the cover that is vibration resistant, easy assembly and disassemblyWire retention tabs on the strut from a height of 37.5 mm to prevent any wires already laid from slipping outThe upper edges of the strut are deburredStiffening bars in the base give the duct extra stability, and cable supports and dividers can be mounted on themThe predetermined breaking point at the end of the strut allows the struts to be easily broken off for larger cross-sectionsDouble-sided adhesive tape on the base for fixing when attaching the duct

The channels of the V6K series are made of PVC and have the following characteristics:RoHS compliantUL and CSA approvedVDE approvalDIN bottom holes from width 80 mm three-trackNon-slip lid thanks to the rubber lip on the inside of the lidWire retention lugs on the web to prevent slipping of already laid wiresPredetermined breaking point of the crossbar in the floor. This makes it possible for the transitions from longitudinal tracks to transversely routed channels to the groundStiffening bars in the bottom, giving the channel more stabilityTop edges of the web are terminatedPredetermined breaking point on the web attachment, allows the web to be easily broken out for larger cross-sectionsFrom a width of 60 mm, the fastening eyelet for cable ties in the floor, so that cable harnesses can be bundled and strain relief is possible

The channels of the V6K series are made of PVC and have the following characteristics:RoHS compliantUL and CSA approvedVDE approvalDIN bottom holes from width 80 mm three-trackNon-slip lid thanks to the rubber lip on the inside of the lidWire retention lugs on the web to prevent slipping of already laid wiresPredetermined breaking point of the crossbar in the floor. This makes it possible for the transitions from longitudinal tracks to transversely routed channels to the groundStiffening bars in the bottom, giving the channel more stabilityTop edges of the web are terminatedPredetermined breaking point on the web attachment, allows the web to be easily broken out for larger cross-sectionsFrom a width of 60 mm, the fastening eyelet for cable ties in the floor, so that cable harnesses can be bundled and strain relief is possible

The channels of the V6K series are made of PVC and have the following characteristics:RoHS compliantUL and CSA approvedVDE approvalDIN bottom holes from width 80 mm three-trackNon-slip lid thanks to the rubber lip on the inside of the lidWire retention lugs on the web to prevent slipping of already laid wiresPredetermined breaking point of the crossbar in the floor. This makes it possible for the transitions from longitudinal tracks to transversely routed channels to the groundStiffening bars in the bottom, giving the channel more stabilityTop edges of the web are terminatedPredetermined breaking point on the web attachment, allows the web to be easily broken out for larger cross-sectionsFrom a width of 60 mm, the fastening eyelet for cable ties in the floor, so that cable harnesses can be bundled and strain relief is possible

The channels of the V6K series are made of PVC and have the following characteristics:RoHS compliantUL and CSA approvedVDE approvalDIN bottom holes from width 80 mm three-trackNon-slip lid thanks to the rubber lip on the inside of the lidWire retention lugs on the web to prevent slipping of already laid wiresPredetermined breaking point of the crossbar in the floor. This makes it possible for the transitions from longitudinal tracks to transversely routed channels to the groundStiffening bars in the bottom, giving the channel more stabilityTop edges of the web are terminatedPredetermined breaking point on the web attachment, allows the web to be easily broken out for larger cross-sectionsFrom a width of 60 mm, the fastening eyelet for cable ties in the floor, so that cable harnesses can be bundled and strain relief is possible

The channels of the V6K series are made of PVC and have the following characteristics:RoHS compliantUL and CSA approvedVDE approvalDIN bottom holes from width 80 mm three-trackNon-slip lid thanks to the rubber lip on the inside of the lidWire retention lugs on the web to prevent slipping of already laid wiresPredetermined breaking point of the crossbar in the floor. This makes it possible for the transitions from longitudinal tracks to transversely routed channels to the groundStiffening bars in the bottom, giving the channel more stabilityTop edges of the web are terminatedPredetermined breaking point on the web attachment, allows the web to be easily broken out for larger cross-sectionsFrom a width of 60 mm, the fastening eyelet for cable ties in the floor, so that cable harnesses can be bundled and strain relief is possible

The channels of the V6K series are made of PVC and have the following characteristics:RoHS compliantUL and CSA approvedVDE approvalDIN bottom holes from width 80 mm three-trackNon-slip lid thanks to the rubber lip on the inside of the lidWire retention lugs on the web to prevent slipping of already laid wiresPredetermined breaking point of the crossbar in the floor. This makes it possible for the transitions from longitudinal tracks to transversely routed channels to the groundStiffening bars in the bottom, giving the channel more stabilityTop edges of the web are terminatedPredetermined breaking point on the web attachment, allows the web to be easily broken out for larger cross-sectionsFrom a width of 60 mm, the fastening eyelet for cable ties in the floor, so that cable harnesses can be bundled and strain relief is possible