34 products were found matching your search for Multimedia Design in 4 shops:

It's time to experience the future of studio monitoring with the iLoud Precision 6 6.5" 150W Active 2-Way Professional High-Resolution Studio Monitor. This innovative product from the iLoud Precision series is a testament to IK's over 25 years of expertise in loudspeaker design and digital signal processing. Handcrafted in Italy, these monitors deliver an unparalleled level of sonic detail, outperforming competitors priced three times higher.The iLoud Precision 6 boasts a truly class-defying audio performance, offering a best-in-class frequency response with an extended range of 36 Hz - 30 kHz. Its ultra-flat response from 45 Hz to 30 kHz ensures precise and uncolored audio across the entire listening range, providing an unmatched clarity and translation.Equipped with a state-of-the-art 96 kHz internal DSP system, digital crossover, and custom-designed audiophile amplifiers, the iLoud Precision 6 delivers a true linear phase response above 150 Hz. This results in precise stereo imaging, sharp transients, solid bass, and breathtaking detail, providing a sound quality that's absolutely true to life.The iLoud Precision 6 also sets a new standard for time coherence, offering the highest level of time accuracy without sacrificing frequency response. This precise time alignment provides an incredibly transient response and frequency balance, eliminating ear fatigue that can develop over longer listening sessions.With built-in acoustic calibration based on the acclaimed ARC System technology, the iLoud Precision 6 can tune itself to any environment, from your mixing room to your living room. This feature, coupled with an adjustable bass roll-off, allows for unparalleled low-end performance in any setup, without the need for an external crossover.The iLoud Precision 6 also introduces X-MONITOR, a newly developed advanced control application for Mac and Windows. This powerful software assists with ARC calibration and enables extended acoustic and voicing selection and adjustments, allowing you to fine-tune your monitor to your taste. Plus, X-MONITOR emulates the frequency and phase response of the most famous studio monitors on the market, providing a breathtakingly true-to-life experience.Each iLoud Precision 6 comes with a high precision MEMS measurement microphone for easy setup and 4 iLoud Isolation Pods to reduce the propagation of vibrations between the speaker and supporting surface. These features, along with its advanced electro-acoustic design and stunning audio performance, make the iLoud Precision 6 a must-have for any professional audio setup.

iLoud MTM uses the most advanced DSP techniques for sound quality that's simply not obtainable with traditional analog designs. A midrange-tweeter-...

Find the ultimate solution to your audio monitoring needs with the iLoud Precision 5 5" 135W Active 2-Way Professional High-Resolution Studio Monitor. This innovative product from the iLoud Precision series is a testament to IK's 25+ years of expertise in loudspeaker design and digital signal processing. Designed and handcrafted in Italy, this studio monitor offers a class-defying audio performance that outperforms monitors triple its price. It boasts a best-in-class frequency response with an extended range of 36 Hz - 30 kHz, offering a stunningly accurate ultra-flat response from 45 Hz to 30 kHz. This ensures precise and uncolored audio throughout the entire listening range, making it perfect for creating mixes that translate perfectly to the outside world.The iLoud Precision 5 Studio Monitor is equipped with a unique linear phase response for unmatched clarity. This feature, combined with its advanced 96 kHz internal DSP system, digital crossover, and custom-designed audiophile amplifiers, delivers a true-to-life sound quality that is clear, transparent, and revealing. The monitor's perfect time alignment matches the theoretical ideal speaker performance, offering an incredibly transient response and frequency balance. This eliminates ear fatigue that can develop over longer listening sessions, improving the "readability" of the program and its translation.One of the standout features of the iLoud Precision 5 Studio Monitor is its built-in acoustic calibration based on the acclaimed ARC System technology. This feature, coupled with the included MEMS measurement microphone, allows the monitor to tune itself to any environment, from your mixing room to your living room.The iLoud Precision 5 Studio Monitor also offers deep, controlled bass with or without a sub. With bass extension down to 36 Hz at only - 4 dB, it delivers a powerful yet balanced bass performance. The monitor also comes with X-MONITOR software, which includes 20+ iconic monitor emulations and extended voicing controls. This allows you to fine-tune the monitor to your taste and provides convenient remote access to the settings on the Precision's back panel.Each iLoud Precision 5 Studio Monitor includes a high precision MEMS measurement microphone and a kit of 4 iLoud Isolation Pods. These features, along with its advanced electro-acoustic design and state-of-the-art DSP/software, make the iLoud Precision 5 5" 135W Active 2-Way Professional High-Resolution Studio Monitor a must-have for audio professionals and musicians alike.

Discover the ShuttleXpress, a sleek and durable multimedia control surface designed to elevate your audio and video editing experience. This stylish, compact device is the perfect companion for both Mac and Windows users seeking a user-friendly solution for multimedia control.Crafted by the reputable Contour Design, the ShuttleXpress is modeled after the award-winning ShuttlePRO and offers high-quality professional multimedia control at an exceptional value. With its five fully programmable buttons, this device allows for quick and easy access to your most essential functions, such as play, pause, and volume adjustments.The ShuttleXpress is not just about functionality; it's also about efficiency and comfort. The ergonomic design ensures that users can maintain productivity without sacrificing comfort, providing one-hand access to the intuitive jog and shuttle controls. The inner jog wheel rotates through a full 360 degrees for precise frame-by-frame navigation, making it an indispensable tool for detailed video editing.The outer shuttle ring, with its rubberized, spring-loaded design, enables effortless fast-forwarding and rewinding, enhancing your control during playback and editing tasks. This versatility extends beyond traditional multimedia applications, as the jog and shuttle can be used for a variety of other purposes, including scrolling through documents, controlling volume levels, and managing sequences with ease.Pre-configured for many leading audio and video applications, the ShuttleXpress streamlines your workflow right out of the box. However, its true power lies in its customizability. Tailor the ShuttleXpress to your specific needs, no matter the application, ensuring that your creative process is as smooth and uninterrupted as possible.In summary, the ShuttleXpress stands out as a stylish, durable, and compact multimedia control surface that offers a user-friendly interface and high-quality performance. Whether you're editing on the go or in a studio setting, the ShuttleXpress is designed to enhance your multimedia projects with precision and ease.

iKlip Xpand is a new microphone stand mount for tablets. Its expandable design fits the iPad (from mini to Air, all generations), Samsung Tab, Gala...

Overview 'Swiss Army knife' direct box for multi-media Easy to use, ultra-quiet passive design Eliminates ground loops that cause hum and buzz...

What sets the Canon LE-RC01 Remote Control apart is its seamless integration and dedicated design for the LE-5W Multimedia Projector. This durable remote control is built to withstand frequent use, making it an ideal accessory for professionals and enthusiasts alike who rely on their projector for presentations, lectures, or home entertainment.Crafted with a compact form factor, the LE-RC01 is not only easy to handle but also conveniently portable, ensuring it fits comfortably in your hand and can be taken wherever your presentations or screenings may lead. Its user-friendly interface simplifies navigation, allowing you to effortlessly access and control a wide range of functions on your LE-5W projector with the touch of a button.As a multifunctional tool, the LE-RC01 enhances your multimedia experience by providing you with the power to adjust settings such as volume, input selection, and power on/off without needing to physically interact with the projector. This high-quality remote control ensures that you can focus on delivering impactful presentations or enjoying your media content from a distance, with the confidence that every command will be executed promptly and accurately.Choosing the Canon LE-RC01 Remote Control means opting for a product that is specifically tailored to complement and control your LE-5W Multimedia Projector with precision. Its dedicated compatibility eliminates the hassle and uncertainty that can come with universal remotes, providing a streamlined and efficient user experience.Whether you're in a classroom, conference room, or cozying up for a movie night at home, the Canon LE-RC01 Remote Control is the quintessential companion to your LE-5W Multimedia Projector, designed to enhance functionality and user engagement with every use.

What sets the DXE-CAT-S1 apart in the Digital Xtreme Series is its unique blend of affordability, advanced features, and user-friendly design. Unlike traditional CAT extenders, this product revolutionizes the market with its innovative design and functionality. The DXE-CAT-S1 is meticulously designed with all connectors on one side, promoting a cleaner wiring setup and facilitating easier rack mounting. This thoughtful design feature simplifies the installation process and enhances the overall aesthetic of your setup. One of the standout features of this HDMI HDBaseT CAT Extender Set is Aurora's exclusive FleXPower circuit (Patents Pending). This groundbreaking technology allows for flexible power options, enabling both the transmitter and receiver to be powered from either side using a single wall supply. This not only reduces installation time but also contributes to a neater, more organized setup. The DXE-CAT-S1 is also equipped with HDBaseT technology, a key feature that ensures optimal performance over long distances. With just a single CAT cable, this extender set can transmit up to 230ft with 1080p 60Hz 36bit color depth, depending on the model and cable used. Moreover, the DXE-CAT-S1 supports bi-directional transmission of RS-232 and IR signals over the same cable, adding to its versatility and convenience. This HDMI HDBaseT CAT Extender Set is not just a product, but a comprehensive solution for your audio and video transmission needs.

Before settling for an average CAT extender, discover the advanced capabilities of the Aurora Multimedia DXE-CAT-RX3 HDMI HDBaseT Extender with Relays. This cutting-edge device not only shatters expectations with its cost-effectiveness but also stands out with its comprehensive feature set and user-friendly design. The DXE-CAT-RX3 Series is expertly engineered to integrate seamlessly with the Digital Xtreme Series of HDBaseT transmitters, including the DXW-2 Series HDBaseT wall plates, DXE-CAT-TX1, DXE-CAT-TX2, and DXM Matrixes. Its rear-mounted connectors facilitate a polished and professional installation, ensuring that your setup is both efficient and aesthetically pleasing.Harness the power of HDBaseT technology to extend your HDMI signal with unparalleled clarity and stability. The DXE-CAT-RX3 can transmit a full 1080p 60Hz signal with a 48-bit color depth up to 330 feet using a standard CAT cable. For longer distances, achieve 1080p 60Hz with a 24-bit color depth over 500 feet with CAT 6 cabling, or an impressive 600 feet with CAT 6A Shielded cabling, depending on the transmitter model used.Moreover, this extender supports bi-directional RS-232, IR, and LAN signal transmission, allowing you to send and receive data and control signals over the same single CAT cable. This feature simplifies the cabling requirements for AV installations in educational settings, corporate environments, or for home theater enthusiasts, making it an ideal solution for rolling carts, podiums, and credenzas.Elevate your multimedia experience with the Aurora Multimedia DXE-CAT-RX3 HDMI HDBaseT Extender with Relays, a device that redefines the standards for audiovisual signal extension.

Before settling for an average CAT extender, discover the advanced capabilities of the Aurora Multimedia DXE-CAT-RX3 HDMI HDBaseT Extender with Relays. This cutting-edge device not only shatters expectations with its cost-effectiveness but also stands out with its comprehensive feature set and user-friendly design. The DXE-CAT-RX3 Series is expertly engineered to integrate seamlessly with the Digital Xtreme Series of HDBaseT transmitters, including the DXW-2 Series HDBaseT wall plates, DXE-CAT-TX1, DXE-CAT-TX2, and DXM Matrixes. Its rear-mounted connectors facilitate a polished and professional installation, ensuring that your setup is both efficient and aesthetically pleasing.Harness the power of HDBaseT technology to extend your HDMI signal with unparalleled clarity and stability. The DXE-CAT-RX3 can transmit a full 1080p 60Hz signal with a 48-bit color depth up to 330 feet using a standard CAT cable. For longer distances, achieve 1080p 60Hz with a 24-bit color depth over 500 feet with CAT 6 cabling, or an impressive 600 feet with CAT 6A Shielded cabling, depending on the transmitter model used.Moreover, this extender supports bi-directional RS-232, IR, and LAN signal transmission, allowing you to send and receive data and control signals over the same single CAT cable. This feature simplifies the cabling requirements for AV installations in educational settings, corporate environments, or for home theater enthusiasts, making it an ideal solution for rolling carts, podiums, and credenzas.Elevate your multimedia experience with the Aurora Multimedia DXE-CAT-RX3 HDMI HDBaseT Extender with Relays, a device that redefines the standards for audiovisual signal extension.

Classic American EQ is what the EQ P50A module screams about. Its three band proportional Q design the result of an ingenious mind and clever eng...

The AXE I/O Audio Interface with Advanced Guitar Tone Shaping from IK Multimedia is a professional 2-in/5-out audio interface and controller design...

iKlip Xpand is a new microphone stand mount for tablets. Its expandable design fits the iPad (from mini to Air, all generations), Samsung Tab, Gala...

Fulltone Collection includes 3 powerful processors that are equally at home for music production as well as creative sound design. Wether you are a...

Multi-button Jog & Shuttle Multimedia Control Surface.... Sleek innovative design, pre-configured for many of today's popular applications, advanced programmability, and ease of use... in short, the perfect marriage of form and function. The ShuttlePRO V.2 is a powerful productivity enhancement tool for video and audio editors. The ShuttlePRO V.2 even comes pre-configured for many of the leading Audio and Video applications. You can also easily customize the ShuttlePRO V.2 for virtually any application. The ShuttlePRO V.2 is designed for ergonomic integrity and maximizing productivity, allowing one-hand access to the fully programmable buttons and jog/shuttle knob. Nine (9) of the buttons have removable keycaps for easy labeling and referencing. The inner ring or 'jog' rotates through 360 degrees and provides precision frame by frame control. The outer black ring or 'shuttle' is rubberized and spring-loaded. It facilitates fast forward and rewind. You can also use the jog and shuttle for many other purposes such as scrolling, volume control, and sequencing. With Key Composer, users can now assign multiple keystroke combinations, or macros, to execute from a single button on the ShuttlePRO V.2. These macros can be executed either all at once, or step by step, giving ShuttlePRO V.2 users much more control over their applications. Key Composer provides users many productivity enhancements, including: - rapid cycling through application tools and windows, - execution of complex multi-step tasks with the touch of one button, and - access to multi-key command shortcuts. The ShuttlePRO V.2 is pre-programmed to make editing fast and easy right out of the box for many leading audio and video applications, providing productivity for users across their entire production workflow. Supported applications include Apple Final Cut Pro and Final Cut Express, Avid Express DV, Adobe Premiere Pro and Audition, Cakewalk SONAR, Digidesign ProTools, Emagic Logic Audio, MOTU Digital Performer, Pinnacle Edition and Commotion, Sonic Foundry ACID, Sound Forge and Vegas Video, Steinberg Cubase and Nuendo, and many more. Through an intuitive control panel interface, the ShuttlePRO V.2 is easily programmed to work with virtually any application.

While the UNO Synth Pro Desktop Portable Monophonic Analog Synthesizer may be compact in size, it delivers a powerful punch in terms of performance and versatility. This next-generation analog synthesizer is designed for all levels of users, boasting a 3-oscillator paraphonic design, dual-filter system, and an impressive 256 presets. The UNO Synth Pro Desktop is equipped with a new 64-step sequencer and expanded CV/Gate and audio connections, making it a comprehensive solution for your music production needs. With three analog oscillators, each offering continuously variable waveshape, pulse-width modulation, sync, oscillator FM, and ring modulation, this synthesizer can generate a wide array of analog synth sounds. It also features a white noise generator for added sonic possibilities.The dual-filter design of this synthesizer sets it apart. It incorporates both the original UNO 2-pole OTA multimode filter and a new SSI 2/4-pole LP filter with self-oscillation. These can be used in series or parallel with invertible phase, providing 24 unique filter modes. The UNO Synth Pro Desktop offers massive flexibility with two full ADSR envelopes for both filter and amplitude, and two LFOs for creating classic synth vibrato, wah, and tremolo. It also includes a 16-slot modulation matrix for complex modulation schemes, accepting both internal and external sources, including MIDI controllers.The synthesizer also comes with deep onboard effects, featuring four effect blocks: an analog overdrive circuit, and 12 new digital effects, including modulation, delay, and reverb. External signals can be routed through these effects, with pre-effects filtering for added versatility.The UNO Synth Pro Desktop also offers 256 user-editable presets, a 64-step sequencer, and a 10-mode arpeggiator. The new "chord mode" leverages the paraphonic design of the UNO Synth Pro, offering even more creative possibilities.In terms of connectivity, this synthesizer is advanced and versatile. It features two balanced stereo outputs, a headphone out, USB, MIDI I/O, and assignable CV/Gate connections, allowing it to interact seamlessly with modular gear. An audio input also provides access to the filter and FX section, in addition to pass-through for daisy-chaining multiple units.

From the sleek design to the high-tech functionality, the Aurora Multimedia DXW-2EU VGA to HDMI Converter is a modern solution for your multimedia needs. This elegant white wall plate transmitter is equipped with HDBaseT CAT extension, enabling it to convert VGA (YPbPr, S-Video, Video) with audio to HDMI locally and transmit the signal up to an impressive 600ft. This sets the DXW-2EU apart in the market, offering superior compatibility with a wide range of devices such as computers, laptops, TVs, and projectors.The DXW-2EU is not just a converter, it's a stylish and modern switcher, converter, and extender all rolled into one. The sources can be easily selected using the buttons on the wall plate or remotely via RS-232 commands sent through the matching receiver device (DXE-CAT-RX, DXM Matrixes, etc). Adding to its versatility, the DXW-2EU features a LAN port, allowing for easy connection to the network without the need for a separate wall plate. It also boasts two USB ports, perfect for powering USB devices and transmitting 480Mbps up to 230ft independently to a different location. The DXW-2EU can be remotely powered by the receiver device and also has the ability to receive IR signals via the sensor window on the front of the unit. This allows for remote control of IR controllable devices, adding another layer of convenience to this high-tech device. In summary, the Aurora Multimedia DXW-2EU VGA to HDMI Converter is a stylish, modern, and high-tech solution that saves money and simplifies installation by combining the functionality of a switcher, converter, and extender into one sleek package.

Add frame-by-frame control to your existing NLE system with the black ShuttlePRO v2 multimedia controller from Contour Design. Cross-platform and...

Lock in the highest level of projector security with the Peerless PE1120 Projector Enclosure (White). Its solid steel construction provides maximum security and is designed to be easily retrofitted to any mount, protecting the projector from theft and physical damage. Its wrap-around design and 'Hook-n-Hang' frame enables easy one-person installation and projector maintenance.

Lock in the highest level of projector security with the Peerless PE1120 Projector Enclosure (Black). Its solid steel construction provides maximum security and is designed to be easily retrofitted to any mount, protecting the projector from theft and physical damage. Its wrap-around design and 'Hook-n-Hang' frame enables easy one-person installation and projector maintenance.