Er zijn 101 producten gevonden die overeenkomen met uw zoekopdracht voor dante in 7 winkels:

RME HDSPe AoX-D, Dante PCI-Express Card The HDSPe AoX PCIe x4 audio interface cards combine two network ports with headphone output, AES3, MIDI and internal expansion headers for up to four MADI ports. Whether in a Thunderbolt™ expansion chassis or built into DAWs or audio processors, these cards send and receive up to 512 audio channels and offer numerous mixing and routing options. The PCIe x4 interface, which only occupies a single slot, transmits and receives up to 512 channels of network audio signals via two separate RJ45 connectors. The network audio channels can be partially replaced by MADI signals (or extended in the case of the Milan® version) by adding up to two optional dual optical or dual coaxial expansion cards. This makes it possible for the first time to integrate four MADI input signals, four MADI output signals and up to 256 network audio channels per direction into a single audio interface - under macOS and Windows. Compared to these massive channel counts, the ¼’ stereo headphone jack takes up a lot of space on the card - for good reason, as it allows you to monitor any signal that reaches the card - from the computer, the network or the optional MADI inputs. And to bring another signal into the mix, a digital AES3 stereo I/O is available along with MIDI via a breakout cable, making it a versatile and fully-fledged professional interface. The large number of channels can be managed by the user in two steps. Using a driver dialogue or a web interface, the user first sets the number of network or optional MADI channels and then selects which inputs reach the 256-channel TotalMix engine. The remaining 256 channels are passed through directly. All 512 channels are visible to the DAW for recording. TotalMix offers its basic functionality without effects, but with all the great advantages such as presets, layouts, loopback, sub-mixes and much more. The card can be installed in external Thunderbolt™ enclosures, as a perfect addition to mobile recording setups, or built into popular DAWs or audio processors. Features combines 2 network connections with headphone output, AES3, MIDI and internal expansion headers for up to four MADI ports sends and receives up to 512 audio channels offers numerous mixing and routing options Technical Data PCIe I/O: 512/256/128 channels at 48/96/192 kHz sampling rate 1x headphone output, ¼’ TRS 4 x MADI I/O (coaxial BNC & optionally available optical SFP module) AES3 I/O via DB9 to XLR breakout cable 2 x RJ45 1 GigE Wordclock I/O (BNC) MIDI I/O via DB9 to 2x DIN breakout cable

Nesti Dante Dei Colli Fiorentini Cypress Regenerating, 250 gr, Vastezeep voor Vrouwen , Je huid regelmatig en grondig wassen is cruciaal voor een goede hygiëne, en alleen water is niet voldoende. De vaste zeep Nesti Dante Dei Colli Fiorentini Cypress Regenerating is een door de jaren heen beproefde klassieker voor kwalitatieve hygiëne. Je huid wordt er doeltreffend mee gereinigd, alle vuil en vet wordt verwijderd en je huid gaat er zacht van aanvoelen. En wat meer is, na gebruik heb je geen bergen afval – in tegenstelling tot vloeibare zeep zit vaste zeep namelijk niet in een plastic fles. Kenmerken: reinigt de huid in de diepte herstelt de huidbarrière ruikt aangenaam Hoe te gebruiken: Breng zeep aan op de huid, schuim zachtjes op en masseer. Afspoelen met lauw water.

LD Systems D USB 22 Dante Adapter The 2×2 Dante® USB-C Audio Adapter is a compact, bidirectional Dante®-to-USB-C audio interface for integrating computers and USB-C devices into professional network-based audio systems. It supports true plug & play via USB Audio Device Class 2.0, while routing and device settings can be conveniently managed in the Dante Controller. Thanks to AES67 RTP support, it also provides you with enhanced interoperability in mixed network environments. The adapter offers high-resolution 24-bit audio transmission at 48 / 96 kHz and provides selectable latency options of 1, 2, or 5 ms to cover different system requirements. For flexible use, you can power it either via PoE or locally via USB-C. Its compact and robust housing makes it ideal for mobile use as well as for temporary and permanent installations. Features Bidirectional Dante®-to-USB-C audio interface Plug & Play via USB Audio Device Class 2.0 Configurable with Dante® Controller AES67 RTP support for broader network compatibility High-resolution audio transmission: 24-bit at 48/96 kHz Selectable latency: 1, 2, or 5 ms Power supply via PoE or USB-C Compact, robust housing for mobile use Technical Specifications General Material: Plastic Frequency response (±1 dB, rel. avg): 20 - 20,000 Hz Color: Black USB Connection Connection type: USB-C female USB standard: USB 2.0 High-Speed Max. data rate: 480 Mb/s Inputs Number of Dante® inputs: 1 Dante® connection type: RJ-45 socket Dante® Channel configurations: Stereo (2 channels) Sampling rate: 48 kHz Bit depth: 16-bit, 24-bit Signal Processing Audio formats: PCM 2.0 Internal processing width: 16-bit, 24-bit Internal sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Power Supply Operating voltage: USB Bus-powered (5 V DC / 500 mA), PoE (44 V DC - 57 V DC, IEEE 802.3af Class 0) Power consumption: 1.65 W Power connection: RJ-45 socket Environmental Conditions Application area: Indoor Ambient temperature: 0 - 40 °C Maximum humidity (non-condensing): 80% Dimensions & Weight Dimensions (WxDxH): 115 x 40 x 28 mm Weight: 0.09 kg

Yamaha DM3 Digital Mixer The DM3 Standard portable, compact digital mixing console has versatile features that make it perfect for a wide range of applications. The DM3 Standard offers excellent sound quality, quick and easy setup and operation, and features at the highest professional level. The DM3 series combines all the features required for streaming in a compact package. The consoles are equipped with numerous analog inputs and outputs and USB ports. These allow the mix to be transferred directly to a computer running streaming software. Completely flexible audio routing provides maximum freedom, allowing, for example, separate mixing of audio for on-site sound reinforcement and streaming. As Yamaha, s most compact Dante-compatible mixer, the DM3 delivers low latency, high-quality 96kHz sound with 16 analog inputs and eight outputs, and fits perfectly with the Tio1608-D I/O rack for even easier and faster system setup. Technical Data 8 + 1 fader configuration 9-inch multi-touch screen Input channels: 16 mono + 1 stereo + 2 FX return Buses: 1 stereo, 6 mix, 2 FX, 2 matrix (supports input to matrix) Local I/O: 16 Mic/Line (12 XLR + 4 XLR/TRS Phones combo) inputs and 8 (XLR) outputs USB: 18 inputs and 18 outputs Dante: 16 inputs and 16 outputs 8 groups with DCA roll-out 18 effects and GEQ on mix 1-6 and stereo Sampling rate: 48kHz/96kHz Dimensions (WxDxH): 320x140x455mm Weight: 6,5 kg

Tascam IF-DA2 Dante Interface The IF-DA2 is a Dante interface card for Solid State Recorders SS-R250N/SS-CDR250N. Connection with 2 inputs and 2 outputs by mounting the IF-DA2 to the SS-R250N/SS-CDR250N for a Dante system. Features Optional Dante Interface card for Solid-state recorders SS-R250N/SS-CDR250N Sampling Frequency: 44.1kHz, 48kHz, 96kHz Enables the configuration, monitor control and connection with other devices via Dante Controller RJ-45 Connection Technical Data Supported Sampling Rates: 44.1 kHz / 48 kHz / 96 kHz Bit length: 16 / 24 Bit Input: 1x RJ-45 Output: 1x RJ-45 RJ-45 Protocol: Dante Power consumption: 0,8 W Dimensions (WxDxH): 73 x 113 x 31 mm Weight: 50,5 g

Monacor DRM-884DTM Dante Module Dante® module for integrating the DRM-884 audio matrix router into a Dante® network. Audio transmission over Ethernet using the Dante® protocol with 8 digital inputs and 8 digital outputs. Features Dante® module for integrating the DRM-884 audio matrix router into a Dante® network Audio transmission over Ethernet using the Dante® protocol 8 digital inputs and 8 digital outputs Easy signal control via network technology Mini-PCI plug-in card Connectors: 2x RJ45 System requirements: Windows 7/8/10 or MacOS X Technical Data Type: Dante® module Color: black Suitable for: DRM-884 Power supply: via DRM-884 Permissible operating temperature: 0-40 °C Connectors: 2x RJ45 Packaging unit: 1 Packaging dimensions (W x H x L): 0.155 x 0.05 x 0.18 m Net weight: 0.118 kg Dimensions & Weight Dimensions(WxDxH): 0x0x0mm Weight: 0.118 kg What, s in the Box Monacor DRM-884DTM Dante module

Tascam IF-DA64 Dante Interface The TASCAM IF-DA64 is an optional 64-channel Dante interface card with ST 2110 support dedicated to the DA-6400 series models. Equipped with primary and secondary ports for I/O redundancy, the IF-DA64 supports simultaneous input/output of 64-channels in sampling frequencies of 44.1k/48kHz, and 32-channels in 88.2k/96kHz. Technical Data Channels and formats: 44.1/48 kHz: 64 channels max / 88.2/96 kHz: 32 channels max Connector: 2x RJ-45 Transmission protocol: Dante Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab) Cables: category 5e or faster

Audinate ADP-USBC-2X2 Dante USB Adapter Features For connecting a computer or mobile device to a Dante® audio network 2-channel recording/playback Sample rate 48 kHz, 24 bit Compatible with Windows, Mac OS, iOS and Android devices, no drivers required Technical Data Type: Dante® AVIO USB adapter Type: 2-channel Color: Black Power supply: PoE, USB Connectors: 1 X RJ45, 1 X USB Type-C™. Weight: 0.1kg

Audinate ADP-DAI-2X0 Dante Avio Input Adapter Features Für den Anschluss von analogen Audio-Line-Level-Geräten (z. B. Aktiv-Lautsprecher) an ein Dante&reg;-Audio-Netzwerk Einstellbarer Signalpegel +24/+4/0 dBu, 0/-10 dBV (über Dante&reg;-Controller) Das Markenzeichen Dante&reg; sowie die ggf. in diese Produkte integrierte Dante&reg;-Software wurden lizensiert von der Audinate Pty Ltd. Technische Daten Frequenzbereich: 20-20000 Hz Impedanz: 20 k&Omega; (sym.), 10 k&Omega; (asym.) Dynamikumfang: > 100 dB Signal/Rauschabstand: > 100 dB Klirrfaktor: < 0,0 1% Sample-Rate: 44,1/48/96 kHz, 24 Bit Anschlüsse: 1 x RJ45, 2 x XLR-Kupplung Typ: 2-Kanal Farbe: schwarz Gewicht: 0,165kg

Palmer RIVER lahn 2x2 Dante Interface The Palmer RIVER lahn allows you to integrate analog audio devices into a Dante&reg; network: The lahn is an &ldquo;end-of-network&rdquo; interface that can be used to feed two analog microphone or line signals into a Dante&reg; network. Thanks to its bidirectional functionality, Dante&reg; signals can also be converted into high-quality analog audio signals for feeding into mixing consoles, amplifiers, or loudspeakers. With four-stage gain control and 48V phantom power per channel, the RIVER lahn offers precise control and flexibility for a variety of application scenarios. The lockable XLR audio connectors and Neutrik etherCON&reg; network jack ensure secure connections, while the simple front-panel configuration and user lock on the control panel guarantee user-friendly operation. Each channel is equipped with a signal indicator that shows you the status of your audio transmission at all times. In addition to the included power supply, PoE (Power over Ethernet) can also be used for power supply, offering additional flexibility during installation. Developed in Germany, the RIVER lahn is compatible with Dante&reg; Domain Manager and AES 67. The solid aluminum-steel housing guarantees durability and robustness, ideal for use in demanding environments. Experience the seamless integration of analog and digital audio technology with the Palmer&reg; RIVER lahn and benefit from first-class audio quality and user-friendliness. Features Dante&reg; interface with two inputs and two outputs each Feed two analog microphone or line signals into Dante&reg; networks Convert Dante&reg; signals for mixing consoles, amplifiers, loudspeakers, etc. Four-stage gain control and 48V phantom power per channel Lockable XLR audio connectors and etherCON&reg; network socket from Neutrik&reg; Easy front-panel configuration and user lock Signal indicator for each channel Compatible with Dante&reg; Domain Manager and AES 67 Solid aluminum-steel housing Developed in Germany Technical Data General Product type: 2 x 2 I/O Dante interface Inputs: 2 Input type: Switchable balanced microphone or line level Line outputs: 2 Output type: Balanced line level with automatic muting when Dante/AES67 signal is lost Cooling: Convection Analog input section Number of input connections: 2 Connection: XLR-F Microphone input sensitivity: 63 mV (gain +30 dB) Nominal input limit: 19 dBu (1 kHz sine wave, gain -15 dB) Frequency response: 10 Hz - 20 kHz (-0.5 dB) THD + Noise: 112 dB (gain -15 dB, input 20 dBu, 20 kHz BW, A-weighted) CMRR: > 45 dB Phantom power (per input): + 48 VDC @ 10 mA max Gain: -15dB, 0dB, +15dB, +30dB Analog line outputs Number of...

Audinate ADP-DAI-1X0 Dante Avio Input Adapter Features Für den Anschluss von analogen Audio-Line-Level-Geräten (z. B. Mischpult) an ein Dante&reg;-Audio-Netzwerk Einstellbarer Signalpegel +24/+4/0 dBu, 0/-10 dBV (über Dante&reg;-Controller) Das Markenzeichen Dante&reg; sowie die ggf. in diese Produkte integrierte Dante&reg;-Software wurden lizensiert von der Audinate Pty Ltd. Technische Daten Frequenzbereich: 20-20000 Hz Impedanz: 20 k&Omega; (sym.), 10 k&Omega; (asym.) Dynamikumfang: > 100 dB Signal/Rauschabstand: > 100 dB Klirrfaktor: < 0,0 1% Sample-Rate: 44,1/48/96 kHz, 24 Bit Anschlüsse: 1x RJ45, 1x XLR-Kupplung Typ: 1-Kanal Farbe: schwarz Gewicht: 0,120kg