Znaleziono 2 produkty pasujące do Twojego wyszukiwania: amplifier w sklepach 4:

Revlon Professional Pro You The Amplifier, 250 ml, Spray dodający objętości dla kobiet, Raz na zawsze pożegnaj oklapnięte włosy. Spray dodający objętości Revlon Professional Pro You The Amplifier zapewnia objętość nawet najdelikatniejszym włosom oraz unosi je u nasady, dzięki czemu będą wyglądać na bardziej gęste. Nie obciąża przy tym włosów oraz nie pozostawia uczucia tłustości. Łatwo i szybko pomoże Ci stworzyć piękne włosy pełne objętości, o jakich marzysz. Od tej chwili wszyscy dookoła będą je podziwiać. Właściwości: zapewnia fryzurze objętość już u nasady włosy nabierają puszystości i sprawiają wrażenie gęstszych łatwa i szybka aplikacja Sposób użycia: Nanieś na umyte, mokre włosy, a następnie wysusz suszarką. Nakładaj w kierunku nasady włosów.

Experience the high-end 1-channel amplifier MBM1.24V-4G from Ampire, specifically designed for your truck, bus, or boat in the 24-volt operating voltage range. Precisely and efficiently, it delivers excellent sound with 500 watts RMS and an impressive 1000 watts maximum output power. This mono digital amplifier is characterized not only by its ultra-compact design but also by useful features such as RCA inputs and speaker inputs with auto-turn-on function. An additional feature is the illuminated Ampire logo, which gives the amplifier a modern and distinctive look. Features Mono digital amplifier for 24 volt operating voltage in truck, bus or boat Ultracompact design Cinch inputs Speaker inputs with auto turn-on function 500 Watt RMS/1000 Watt max. Illuminated AMPIRE Logo power supply Operating voltage: 20-32 Volt DC Remote voltage: 8-28 Volt DC Standby current: 0.86A Standby current when switched off: 85dB Input sensitivity: 200mV - 6.0V active switch Low-pass filter: 30Hz-250Hz Slope: 12dB Bass Boost Gain: 0-12dB Bass Boost Frequency: 40-100Hz variable Subsonic filter: 20Hz/24dB Miscellaneous Dimensions (LxWxH): 251 x 141 x 50mm Weight: 1.90Kg Inputs: 2x RCA, 2x Speaker (High Level Auto Turn On for radios with BTL amplifiers) Cable cross-section of the connection terminals Power supply up to 35mm² Speakers up to 10mm²

Revlon Professional Style Masters Amplifier Mousse 1 Pianka do Włosów Zwiększająca Objętość 300mlPianka doskonale sprawdzi się włosom, które są cienkie i przyklepane.Kosmetyk unosi fryzurę u nasady i sprawia, że włosy zyskują na grubości i gęstości.Dodatkowo zawarte w piance składniki pielęgnują, odżywiają i dodają zdrowego blasku.Co ważne, pianka nie obciąża i nie skleja włosów, pozostawia je elastyczne.Pojemność: 300ml/ 287g

With the CLUB A754, JBL presents a 4-channel amplifier that impresses not only with its compact size but also with its power. Just get started and experience how this amplifier supplies your front and rear speakers with an impressive 75 watts RMS. Exciting features like high and low level inputs or the variable crossover make the CLUB A754 an excellent companion for any drive. Thanks to low noise and low distortion, as well as the ability to switch between different modes, this model offers an optimal sound experience. Additionally, the amplifier scores with its versatility: from use with aftermarket or factory stereo systems to adjusting the input sensitivity, the CLUB A754 offers a wealth of possibilities. properties Compact size The JBL Club A754 amplifier has a flat housing and a small footprint, so it fits in vehicles with limited space. High and low level inputs Thanks to the high and low level inputs, the Club A754 can be connected to both aftermarket and factory stereo systems. Variable crossover Unlike many other amplifiers available at similar prices, the JBL Club A754 features variable electronic crossovers for precise system tuning and performance. Low noise and low distortion The Club A754 was developed with symmetrical differential inputs to ensure low noise and low distortion even at high output levels. This makes it much less susceptible to line-induced motor noise. input level control When using low-level inputs, this control adjusts the input sensitivity between 200 mVrms and 2.0 Vrms. When using high-level inputs, this control adjusts the input sensitivity between 2 Vrms and 20 Vrms. Complete On-Board Protection The integrated circuits protect the Club A754 from short circuits, overheating, overvoltage, and undervoltage. An LED display indicates when one of these conditions is present. preamp outputs "If you use multiple amplifiers, the Club A754 has preamp outputs across the entire range, allowing you to power an additional amplifier without a splitter." General Specifications 75 Watt RMS x 4 at 4 Ohm 100 Watt RMS x 4 at 2 Ohm 200 Watt RMS x 2 at 4 Ohm in Bridged Mode 4-ohm stability in bridged mode Variable high-pass and low-pass filters (32-320 Hz, 12 dB/octave) on the front and rear channels Preamp and speaker inputs preamp outputs Safety value 3x 30a  10mm² power and ground cable recommended  Wiring and hardware are not included in the delivery of the amplifier. BxHxT=320mm x 51.3mm x 180mm  What is in the box? 1 x Club A754 Four-Channel Amplifier 4 x adapter from bare cables to RCA 4 x 30A ATO fuses (2 installed, 2 spare fuses) 4 fastening screws (M4 x 53 mm) 2 x JBL stickers 1 x User Manual

Revlon Professional Pro You The Amplifier, 350 ml, Szampony dla kobiet, Żeby włosy były zdrowe, lśniące i pełne witalności, należy zapewnić im odpowiednią pielęgnację. Zaczyna się ona regularnym myciem włosów. Szampon Revlon Professional Pro You The Amplifier pomoże skutecznie usunąć z włosów i skóry głowy wszelkie zabrudzenia, tłuszcz oraz pozostałości produktów do stylizacji i innych kosmetyków. Zapewni Ci uczucie świeżości i czystości, a także idealnie przygotuje Twoje włosy i skórę głowy do dalszej pielęgnacji i wspomoże działanie zawartych substancji czynnych. Właściwości: myje włosy i oczyszcza skórę głowy dodaje blasku i objętości Sposób użycia: Nanieś odpowiednią ilość szamponu na mokre włosy. Spień i dokładnie spłucz. W razie potrzeby powtórz.

The 1-channel amplifier EA-MT1 from Emphaser is a compact and powerful mono amplifier from the Monolith series. With dimensions of just 212 x 35 x 110 mm, it delivers an impressive output of 1 x 450 watts RMS at 4 ohms and 1 x 600 watts RMS at 2 ohms. The amplifier features a Class-D amplifier circuit and a massive die-cast aluminum heat sink, which together ensure outstanding dynamics and efficient temperature management. Additional features include an integrated subsonic filter, a low-pass filter, bass boost, a variable phase shift, as well as RCA and high-level inputs with auto turn-on function. This equipment makes it an ideal choice for any subwoofer and guarantees powerful and low-distortion bass reproduction. The Sound The mono amplifier EA-MT1 from the Monolith series by Emphaser not only offers concentrated power, but also outstanding dynamics and exceptional signal fidelity. Minimal distortion as well as powerful, dynamic bass reproduction are characteristics that distinguish this top-of-the-line digital power amplifier. The Performance Measuring only 212 x 35 x 110 mm, this very compact bass amplifier delivers high power in a very small space. The exceptional aluminum die-cast heatsink design allows significantly smaller dimensions while maintaining excellent temperature management. The optimized Class-D amplifier circuit, combined with the massive heatsink, provides enormous power: With 1 x 450 watts RMS at 4 ohms and 1 x 600 watts RMS at 2 ohms, the EA-MT1 is an ideal power source for any subwoofer. The Features The EA-MT1 features a 12 dB/oct. subsonic filter (15 – 40 Hz) and a 12 dB/oct. low-pass filter (50 – 500 Hz), an integrated bass boost (0 – 15 dB @ 40 Hz), and a variable phase shift (0 – 180°). All controls are hidden under the massive bar with the engraved Emphaser logo. Additional features include RCA and high-level inputs as well as an auto turn-on function for connecting to factory radios without RCA output – this allows the 4-channel amplifier EA-MT4 to be easily combined with factory-installed radios. Main Features EA-MT1 High-Performance Class-D Amplifier Massive Aluminum Die-Cast Heatsink 2 Ohm Stable Integrated Variable Subsonic Filter: 15 – 40 Hz with 12 dB/oct. Integrated Variable Low-Pass Filter: 50 – 500 Hz with 12 dB/oct. Bass Boost (0 – 15 dB @ 40 Hz) Variable Phase Shift (0 – 180°) Variable Input Sensitivity: 0.3 – 6 V RCA and High-Level Inputs with Auto Turn-On Function 20 mm Power Connection Terminals Technical Specifications Output Power @ 4 Ohms: 1 x 450 Watts RMS Output Power @ 2 Ohms: 1 x 600 Watts RMS Frequency Range: 10 Hz – 500 Hz Damping Factor @ 4 Ohms: > 400 Signal-to-Noise Ratio: > 90 dB Dimensions (W x H x D): 212 x 35 x 110 mm Scope of Delivery 1 Amplifier Unit 1 High-Level Connection Cable 1 Bass Level Remote Control

TIGI Curls Rock Amplifier Mega Shaping Cream, 100 ml, Kremy do stylizacji włosów dla kobiet, Odżywka bez spłukiwania TIGI Curls Rock Amplifier Mega Shaping Cream zadba o natychmiastową dawkę intensywnego odżywienia i nawilżenia. Zapewni Twoim włosom wszystko, czego będą potrzebować, dzięki czemu nie będziesz musiał spędzać w łazience więcej czasu, niż to konieczne. Pomoże Ci wygładzić włosy oraz odnowić ich naturalny blask oraz integralność struktury. Wesprze ich regenerację i pomoże w rozczesywaniu. A to wszystko w sposób łatwy i bez konieczności spłukiwania. Wystarczy nałożyć, wetrzeć lub przeczesać, aby zadbać o piękny i zdrowy wygląd Twoich włosów. Wypróbuj tę pielęgnację bez spłukiwania i odkryj prosty oraz szybki sposób na regenerację włosów oraz inne płynące z niej korzyści. Właściwości: poskramia niesforne włosy nadaje włosom przyjemny zapach Sposób użycia: Stosuj na wilgotne włosy, przede wszystkim na ich długości oraz na końcówki. Nie spłukuj. Ułóż włosy w zwykły sposób.

Discover the 1-Channel Amplifier CRE600.1 from Crunch, which impresses with ultra-compact dimensions of only 97 mm width and 47 mm height. Thanks to modern Class D technology, this monoblock achieves an impressive efficiency of up to 90%, allowing for efficient performance and minimal heat generation. With an RMS power of up to 600 Watts at 1 Ohm, the amplifier offers impressive bass control, ideal for larger Subwoofers. The CRE600.1 can be effortlessly combined with the DSP model CRE400.4DSP and also features high-level inputs including EPS® for seamless integration. Comfortable operation is ensured by the included bass level remote control. The package also includes a 30 cm long stereo RCA cable for direct connection. Highlights & Concept: Ultra-compact dimensions: As part of the CRE series, this monoblock shines with an extremely slim housing design of only 97 mm width and 47 mm height. This makes it even more compact than the already space-saving Crunch GTX series and fits into almost any installation situation. Impressive efficiency: Thanks to modern Class D technology, an efficiency of up to 89% (or up to 90% according to the series overview) is achieved. This ensures minimal heat generation with maximum power. Confident bass control: Despite its small dimensions, the amplifier delivers up to 600 Watts RMS at 1 Ohm, driving even larger Subwoofers absolutely confidently and controlled. Perfect for system expansions: Can be ideally combined with the DSP model CRE400.4DSP, configured via smartphone or PC, and directly connected using the included 30 cm long stereo RCA cable. Optimal factory radio integration: Equipped with high-level inputs including EPS® (Error Protection System) and an automatic turn-on function for modern vehicles. Comfortable operation: The package includes a compact bass level remote control, allowing the bass to be conveniently adjusted directly from the driver's seat. Power & Performance: Type: Ultra-compact Class D mono amplifier. RMS power at 4 Ohm: 1 x 300 Watts RMS. RMS power at 2 Ohm: 1 x 450 Watts RMS. RMS power at 1 Ohm: 1 x 600 Watts RMS. Maximum power at 4 Ohm: 1 x 600 Watts MAX. Maximum power at 2 Ohm: 1 x 900 Watts MAX. Maximum power at 1 Ohm: 1 x 1200 Watts MAX. Filters & Features: Low-pass filter (LPF): Adjustable from 50 to 5000 Hz. Full range mode: Usable up to 1200 Hz. Bass Boost: Adjustable from 0 to 12 dB. Inputs: RCA inputs & high-level inputs with EPS®. Turn-on function: Automatic (Auto-On via High-Level). Dimensions: Width: 97 mm Height: 47 mm Length: 208 mm Scope of delivery: Crunch CRE600.1 Mono Amplifier Compact bass level remote control 1 x stereo RCA cable (30 cm)

The A544DSP from Axton is a versatile 4-channel DSP amplifier. With its 10 app-configurable channels, it offers numerous possibilities for customizing your sound system. Optical and coaxial inputs allow connection to high-res audio interfaces, while the integrated Class-A/B amplifier delivers 4 output channels with 4 x 25 W RMS. Features like Bluetooth audio streaming, Plug’N’Play installation, and auto-turn-on keep the A544DSP flexible and user-friendly. Numerous DSP features such as parametric equalizers, crossovers, and time correction complete the profile of this powerful amplifier. Alfa Romeo, Audi, BMW, Citroen, Chevrolet, Chrysler, Dacia, Dodge, Fiat, Ford, GT86, Honda, Hyundai, Jaguar, Jeep, Kia, Lancia, Land Rover, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Porsche, Peugeot, Renault, Seat, Skoda, Smart, Subaru, Toyota, Volkswagen, Volvo All about the A544DSP DSP Amplifier The new AXTON DSP amplifier A544DSP is not only super strong in features but also in price. An incredible 10 channels can be configured with the new A544DSP via app. If more DSP channels are needed, the audio signal can be transmitted losslessly via the optical output to another AXTON DSP amplifier with an optical input, resulting in up to 20 DSP channels. With this concept, it is theoretically possible to create INFINITE DSP channels. Of course, each DSP channel is equipped with a parametric 15-band EQ, crossovers up to 24 dB/Oct., time correction, and phase correction. The revised crossover now offers three filter characteristics: Butterworth, Linkwitz, and Bessel. With the new 9-band INPUT EQ, it can be ensured that all signal sources have an identical frequency response. The newly integrated channel routing significantly simplifies channel assignment. What was previously solved with cable adapters at the input is now done with a few moves in the AXTON DSP app. The integrated Class A/B amplifier powers 4 output channels with 4 x 25 W RMS. That's enough power for a noticeable boost of the factory speakers and a sonorous drive for tweeters in 2-way or 3-way concepts. The other 6 preouts can be conveniently forwarded to an Axton A601, resulting in a powerful amplifier combination with 4 x 25 W RMS + 6 x 100 W RMS, applicable to the multi-channel systems of many car manufacturers. The Plug & Play connection cable is also affordable - the Axton range includes over 30 car brands. The ABT50 interface enables playing Hi-Res audio or music in studio master quality via the A544DSP. Highlights 4-channel Smart Class-A/B amplifier with iOS or Android app-controlled audio DSP functions 10-channel DSP with 6 processed preamp outputs (5 volts) including remote output for controlling additional amplifiers Optical and coaxial input for the High-Res Audio Interface ABT50 or another Axton DSP Optical output for linking the signal to another Axton DSP amplifier Bluetooth audio streaming with automatic source switching Plug’N’Play installation with optional vehicle-specific...

The ATS ISO128 from Axton is a DSP accessory specifically designed for connecting AXTON SMART-DSP amplifiers from the A544DSP/A594DSP, A542DSP/A592DSP, A540DSP/A590DSP, and A500DSP/A530DSP/A580DSP series. With a length of approximately 1.50 m, this cable supports the speaker diagnosis function of original car radios. It is compatible with a variety of vehicles from different brands such as Audi, Seat, Skoda, and Volkswagen that are equipped with a Power Quadlock 3 connector. Connection cable for AXTON SMART-DSP amplifiers for A544DSP/A594DSP, A542DSP/A592DSP, A540DSP/A590DSP and A500DSP/A530DSP/A580DSP. Length approx. 1.50 m This cable supports the speaker diagnostic function of the original car radios. Compatible with the following vehicles with Power Quadlock 3 connection Audi A1 (Type 8X) all models 2010 to present A3 (3G - Type 8V) all models 2012 to present A4 (Type B8) all models 2007 - 2015 A5 (Type 8T) 2007 to 2016 A5 (Type F5) 2016 to present A6 (Type C8) 2018 to present A7 (Type C7) 2010 to present Q2 (Type GA) 2016 to present Q3 (Type 8U) 2011 - 2018 Q3 (Type F3) 2018 to present Q5 (Type 8R) 2008 - 2016 Q5 (Type FY) 2017 to present Without Audi sound system Seat Alhambra II Facelift 2016 to present Arona 2017 to present Ateca 2016 to present Leon (Type 5F) 2012 to present Toledo (4G - Type KG) all models 2015 to present Skoda Enyaq iV 2021 to present Fabia (Type NJ) 2014 to present Karoq 2017 to present Kodiaq 2017 to present Rapid (Type NH) 2011 to present Rapid Spaceback (Type NH) 2011 to present Octavia III (Type 5E) 2013 to present Superb (Type 3V) 2015 to present Volkswagen Amarok 2016 to present Arteon (Type 3G) 2017 to present Beetle 5C Facelift 2015 to present Caddy V 2020 to present Crafter II 2017 to present Golf Sportsvan 2014 to present Golf 7 Type AU 2012 to present Golf 8 2019 to present ID.3 2019 to present ID.4 2020 to present Jetta 6 (Type 162) all models 2015 to present Passat B8 (Type 3G) 2014 - 2020 Passat B8 Facelift (Type 3G) 2020 to present Polo 6 (Type 6C) 2014 - 2017 Polo 7 (Type AW) 2017 to present Scirocco 3 Facelift 2014 - 2017 Sharan 2 Facelift 2016 to present T-Roc (Type A1) 2017 to present T6 2015 - 2019 T6.1 2019 to present Tiguan II (Type AD1) 2016 to present Touareg II (Type 7P) 2010 - 2018 Touareg III (Type CR) 2018 to present Touran II (Type 5T) 2015 to present Up! (Type AA Facelift) 2016 to present

The A601 from Axton is a powerful 6-channel amplifier that fits in any vehicle with its ultra-compact dimensions. Equipped with an aluminum heat sink, it ensures optimal heat dissipation. The amplifier features 12 dB/oct. high-pass and low-pass filters (40 – 400 Hz) and offers both high-level and low-level inputs. Thanks to the auto-turn-on function, the amplifier can be automatically switched on by DC offset or music signal. It is also fully compatible with vehicles that have a start/stop automatic system. The output power is 6 x 100 W at 4 ohms and 6 x 160 W at 2 ohms, while in bridged mode it delivers 3 x 320 W. With a signal-to-noise ratio of 85 dB and a variable input sensitivity of 0.4 – 10 V, this amplifier impresses with excellent performance values. The dimensions are 282 mm in width, 40 mm in height, and 105 mm in depth. HighLights Ultracompact Class-D Amplifier Aluminum heat sink for optimal heat dissipation 12 dB/oct. high-pass and low-pass filters (40 – 400 Hz) High-Level/Low-Level Input Auto-Turn-On via DC Offset or Music Signal Fully suitable for vehicles with start/stop automatic system Specifications Output power @ 4 Ohm 6 x 100 W Output power @ 2 Ohm 6 x 160 W Output power @ 4 Ohm bridged 3 x 320 W Frequency response 10 Hz – 35 kHz Integrated electronic frequency crossovers 12 dB/oct. High-pass and low-pass filters (40 - 400 Hz) Signal-to-noise ratio 85 dB Variable input sensitivity 0.4 – 10 V Dimensions (W x H x D) 282 x 40 x 105 mm

With the SALT-400.2, Sundown Audio presents a pioneering 2-channel amplifier. This model represents the pinnacle of Korean Class-D amplifier technology and was developed from the rich heritage of three previous generations of high-quality Korean amplifiers. The SALT-400.2 is perfect for everyone, from world-class SPL competitors to passionate enthusiasts, and offers optimal performance at realistic operating voltages in the 12 range. With its striking titanium-colored heatsink, improved remote control and unique Low-Voltage Technology, this amplifier series sets new standards. Characteristics The Sundown Audio SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. They stand on the shoulders of the three previous generations of Korean high-end amplifiers from 15 years ago (the SAZ v.1, SAZ, v.2 and SCV series) to achieve even higher performance. Our customers have been asking us for many years to produce amplifiers that deliver optimal performance at realistic operating voltages in the 12s range rather than 14+ volts. The SALT - Sundown Audio Low-Voltage Technology - series is our answer! Whether you're a world-class SPL competitor, a dedicated enthusiast, or just a fan of sound quality, the SALT range will feel right at home in your system. Each and every model has been designed with great attention to detail to ensure they'll put a smile on your face every time the music starts playing, and that they'll last for many years to come too. Cosmetically they are a big departure from our original design, which is an outward indicator of the improved performance level. The heatsink is the heaviest we have ever made, has the most surface area and is finished in a striking titanium color. These amplifiers look as good as they sound and once you hold one in your hands the build quality is obvious. The icing on the cake is the redesigned remote control with temperature, voltage and clipping indicators, allowing you to easily monitor the vitals of your precious audio system. Digital 2-channel full-range amplifier Double-sided epoxy circuit board with through holes Multi-way protection circuit (thermal / voltage / speaker short circuit / DC offset) Voltage, temperature and overload indicator Wired remote control (optional / not included with multi-channel devices) clipping indicator on the amplifier side panel Optimized for standard 12 V charging systems (Low Voltage Technology) Technical data Input sensitivity: 6V - 0.2V 400 x 2 @ 4 Ohm RMS 650 x 2 @ 2 Ohm RMS 1300 x 1 @ 4 ohm RMS bridged 2 OHM stereo stable / 4 OHM bridged stable Variable subsonic crossover filter: 10HZ - 500HZ Variable high pass filter: 50HZ - 500HZ ( 500HZ - 5KHZ at x10 ) Variable low-pass filter: 50HZ - 500HZ (500Hz - 5KHZ at x10) X1, X10 crossover multiply Efficiency: 75% 4OHM, at 100HZ Signal-to-noise ratio: 105DB < Damping factor : 400 < Frequency response: 10 Hz - 25 kHz 12DB/ OCT Variable crossover...

The TA1800 from Autotek is a 1-channel amplifier that offers impressive audio performance for your vehicle. With a stability of 1 ohm and a maximum power of up to 1600 watts at 1 ohm, it guarantees powerful sound. Key features include a low-pass filter of 30 - 250 Hz, a subsonic filter of 20 - 50 Hz, as well as a bass EQ of 0 - 18 dB. The phase switch with 0°/180° allows for flexible sound control. Furthermore, the amplifier can be easily integrated into existing audio systems thanks to the RCA outputs and inputs, as well as the master/slave link mode. A bass remote control also allows for convenient operation. Technical Data 1 x 400 Watt RMS @ 4 Ohm 1 x 600 Watt RMS @ 2 Ohm 1 x 800 Watt RMS @ 1 Ohm 1 x 800 Watt Max. @ 4 Ohm 1 x 1200 Watt Max. @ 2 Ohm 1 x 1600 Watt Max. @ 1 Ohm 223 x 63 x 320/346 mm Features 1 Ohm Stability Low-pass filter 30 - 250 Hz Subsonic-Filter 20 - 50 Hz Bass EQ 0 - 18 dB Phase switch 0°/180° Input sensitivity 2-8 V / 0.2-2 V Cinch Outputs & Inputs Master/Slave Link Mode Bass remote control

With the SALT-8, Sundown Audio presents its latest 1-channel amplifier, which stands out not only for its impressive technology but also for its unique design. Based on three generations of top-notch Korean amplifier technology, this amplifier is capable of achieving peak performance regardless of the operating voltage. Notably, this series is specifically designed for optimal performance at an operating voltage of 12 volts. Whether you are a passionate audiophile enthusiast, an SPL competitor, or simply a music lover, the SALT-8 will find a place in any audio system and provide enjoyment for many years. properties The Sundown Audio SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. They stand on the shoulders of three previous generations of Korean high-end amplifiers from 15 years (the SAZ v.1, SAZ v.2, and SCV series) to achieve even higher performance. Our customers have been asking us for many years to produce amplifiers that deliver optimal performance at realistic operating voltages in the 12-volt range and not at 14+ volts. The SALT - Sundown Audio Low-Voltage Technology - series is our answer! "Whether you are a world-class SPL competitor, a dedicated enthusiast, or simply a fan of sound quality, the SALT series will feel at home in your system. Each individual model has been designed with great attention to detail to ensure that they bring a smile to your face every time the music starts playing, and that they will last for many years to come." Cosmetically, they deviate significantly from our original design, which is an external indicator of the improved performance level. The heatsink is the heaviest we have ever produced, has the largest surface area, and is finished in a striking titanium color. These amplifiers look as good as they sound, and once you hold one in your hands, the build quality is obvious. The icing on the cake is the revised remote control with temperature, voltage, and clipping indicators, allowing you to easily monitor the vital signs of your valuable audio system. Digital connectable Class D mono block amplifier Dual MOS-FET PWM Power Supply Stable 1-Ohm Load 24 dB/Octave - Variable Low-Pass Filter 24 dB/Octave - Variable Subsonic Filter 9 dB/Octave - Variable Bass Boost 180° variable phase shift 4-way protection circuit (thermal, voltage, speaker short circuit, DC offset) Wired remote control with voltage and temperature display and clipping indicator Technical Data Input sensitivity: 6V - 0.2V 8000 x 1 @ 1 Ohm RMS Mono 4000 x 1 @ 2 Ohm RMS Mono 2000 x 1 @ 4 Ohm RMS Mono Variable Subsonic Crossover Filter: 10HZ - 50HZ Variable low-pass filter: 35Hz - 250Hz Bass boost at 45Hz 0-9dB Efficiency: 90% < Signal-to-noise ratio: 90DB < Damping factor: 400 < Frequency response: 10 Hz - 250 Hz Phase shift controller 0-180 degrees Tested Voltage & THD: 12.8V & less than 1% THD Operating voltage: DC 9V - 15.5V input voltage Recommended fuse: 800 Amperes ...

The MX500/1 is a powerful monoblock subwoofer Amplifier from JL Audio, delivering an impressive 500 watts in a Class-D architecture. Thanks to the innovative NexD™ high-speed switching design, it provides excellent audio quality with minimal strain on the charging system. With its IPX7 waterproof rating and corrosion resistance, it is perfect for demanding environments. The amplifier offers versatile adjustment options, including a low-pass crossover and a bass boost EQ, for precise sound tuning. Features Monoblock amplifier in Class D, 500 W x 1 @ 2 Ω NexD™ high-speed switching design IPX7 waterproof aluminum housing Adjustable low-pass crossover Bass boost EQ Dual-range input Optional: M-RBC-1 remote control Technical Specifications RMS power at 14.4 V: 300 W @ 4 Ω, 400 W @ 3 Ω, 500 W @ 2 Ω RMS power at 12.5 V: 250 W @ 4 Ω, 300 W @ 3 Ω, 400 W @ 2 Ω Frequency response: 20 Hz - 12 kHz S/N ratio: >97 dB Damping factor: >115 @ 4 Ω Input voltage: 250 mV - 15 V RMS Minimum cable diameter: 25mm² Fuse rating: 50 A Filter frequency range: 40 Hz - 400 Hz Dimensions: H 45 mm, W 237 mm, D 115 mm

The VX800/8i from JL Audio is a powerful 8-Channel DSP Amplifier with advanced NexD2™ technology that delivers outstanding audio playback. With a power output of up to 100 Watts per channel at 2 Ohm and an ultra-compact chassis, it is ideal for installations in tight spaces. Configuration is easily done via external devices using the TüN™ software. Features 8-Channel Class D Amplifier with integrated DSP Power: 100 W x 8 @ 2 Ω, 75 W x 8 @ 4 Ω Bridged: 200 W x 4 @ 4 Ω NexD2™ technology for exceptional efficiency Ultra-compact design for easy installation Configuration via PC, tablet, or smartphone Includes 35mm² power connection, wiring harnesses, USB cable Technical Specifications RMS power @ 14.4 V: 75 W x 8 @ 4 Ω, 100 W x 8 @ 2 Ω, 200 W x 4 Bridged @ 4 Ω RMS power @ 12.5 V: 60 W x 8 @ 4 Ω, 90 W x 8 @ 2 Ω, 180 W x 4 Bridged @ 4 Ω Frequency response: 12 Hz - 24 kHz S/N ratio: 101 dB (A-weighted) Damping factor @ 4 Ω: >100 / at 50 Hz THD+N: <1% @ 2 Ω per channel Input voltage range: 200 mV - 16 V RMS Cable diameter: 25mm³-35mm² Fuse rating: 80 A Dimensions: H: 54 mm, W: 287 mm, D: 168 mm Weight: 2.95 kg

The RD900/5 from JL Audio is a compact 5-channel Class D amplifier that powers a complete audio system consisting of a Subwoofer and four satellite systems with 900 Watts. Equipped with NexD™ switching technology, it offers 70 Watts per channel for crystal-clear sound at 4 Ohm and 500 Watts for the Subwoofer. With versatile signal processing features and a robust design, it is ideal for high-end audio applications. Features 5-channel system amplifier in Class D 70 W x 4 @ 4 Ω + 500 W x 1 @ 2 Ω NexD™ switching technology Bridged configuration possible Studio-quality signal processing High-pass and low-pass filters Dual-range inputs Automatic turn-on function LED clipping indicators Durable, black powder-coated finish Technical Specifications RMS power at 14.4 V: Main channels @ 4 Ω : 70 W, Subwoofer channel @ 2 Ω : 500 W RMS power at 12.5 V: Main channels @ 4 Ω : 60 W, Subwoofer channel @ 2 Ω : 350 W Frequency response main channels: 12 Hz - 22 kHz Frequency response Subwoofer channel: 10 Hz - 500 Hz S/N ratio main channels: >104 dB Damping factor @ 4 Ω : >150 / 50 Hz THD+N @ 2 Ω : <1% Input voltage range: 200 mV - 8 V Fuse rating: 80 A Dimensions (H x W x D): 54 mm x 372 mm x 177 mm Net weight: 2.79 kg Remote control: Optional (RBC-1)

The Impulse 4.320 from Focal is an ultra-compact 4-Channel Amplifier. The device delivers a CEA power of 4 x 55 Watts RMS at 4 Ohm. At an impedance of 2 Ohm, the maximum power is 4 x 80 Watts RMS. In bridged operation at 4 Ohm, the amplifier reaches a power of 2 x 160 Watts RMS. The frequency range extends from 10 Hz to 20 kHz with a signal-to-noise ratio of 80 dBA. A minimum distortion factor of 0.02 percent is technically specified. Integration is achieved via an automatic start with the main unit and is ISO-compatible through optional accessories. Features 4-Channel Amplifier Ultra-compact design Compatible with OEM and aftermarket head units Automatic start with the original head unit ISO-compatible via separately available cable accessories Tuned for Focal integration speakers Technical Specifications Power: 4 x 55 Watts RMS (4 Ohm) Power: 4 x 80 Watts RMS (2 Ohm) Power: 2 x 160 Watts RMS (bridged at 4 Ohm) Bandwidth: 10 Hz - 20 kHz Minimum distortion factor: 0.02% SNR: 80 dBA

The HD900/5 from JL Audio is a powerful 5-Channel Amplifier, perfect for compact installations with high sound quality. Equipped with advanced R.I.P.S. technology, it delivers consistently high performance, while the Single Cycle Control switching design minimizes distortion. Aesthetically, it impresses with a brushed aluminum finish and robust heat sinks. Ideal for discerning audio enthusiasts. Features 5-Channel Class D System Amplifier R.I.P.S. technology for constant performance Single Cycle Control switching design Brushed aluminum finish Robust cast alloy heat sinks Sealed cover Technical Specifications Main Channels @ 4 Ω: 100 W RMS x 4 Subwoofer Channel @ 4 Ω: 500 W RMS x 1 Frequency Response (Main): 12 Hz - 28 kHz Frequency Response (Subwoofer): 12 Hz - 10 kHz S/N Ratio: >108.5 dB Damping Factor @ 4 Ω: >400 / 50 Hz THD+N @ 4 Ω: <0.03% (Main), <0.05% (Subwoofer) Input Voltage Range: 200 mV - 8 V RMS Cable Diameter: up to 25mm² Fuse Rating: 60 A Dimensions (H x W x D): 49 mm x 273 mm x 211 mm Net Weight: 3.11 kg

The 4-channel Amplifier HD600/4 from JL Audio offers impressive performance with state-of-the-art Class D technology. Its compact form houses Single-Cycle-Control and R.I.P.S. technology for excellent dynamics and clarity. As a versatile amplifier, it is ideal for various audio applications, complemented by its elegant aluminum finish and robust black heat sinks. Features 4-channel full-range amplifier Class D, 150 W x 4 @ 1.5-4 Ω Single-Cycle-Control switching design R.I.P.S. technology for consistent performance Brushed aluminum finish Black powder-coated heat sinks Flexible for use as a 3-channel or with Subwoofer Technical Specifications Rated continuous power (RMS) at 14.4 V: 150 W x 4 @ 1.5-4 Ω, bridged operation: 300 W x 2 Frequency response: 6 Hz - 30 kHz (+0, -1dB) S/N ratio: >110 dB (A-weighted) Damping factor: >300 @ 4 Ω, >150 @ 2 Ω THD+N: <0.03% @ 4 Ω per channel Input voltage range: 200 mV - 2 V RMS, 800 mV - 8 V RMS Minimum cable diameter: 25mm² Fuse rating: 50 A Filter: Low-pass or high-pass, 12/24 dB/octave, 50 Hz - 500 Hz Dimensions: H 49 mm, W 273 mm, D 211 mm