Znaleziono 2 produkty pasujące do Twojego wyszukiwania: mosconi w sklepach 3:

The Mosconi DSP 6to8 PRO is an 8-Channel DSP from Gladen with 48 kHz / 24 Bit High Resolution audio. The 6 x RCA inputs can be switched between High and Low Level with Autosense, complemented by 1 x BT interface, compatible only with BTM. Two inputs can be freely selected as prioritized Auto-fade / Aux. The ATOM Mixer menu allows for dynamic preset switching and trigger control. Outputs include 8 x RCA analog as well as 12 V Remote-out with Autosense for High Level signal. The fully parametric 30 Band EQ is also graphically usable and offers a range of +12 to -12 dB with Q 0.5–40. Each channel has 5 freely configurable filters available, including High-pass, Low-pass, Shelf, Notch, Allpass, and Peak-EQ, with slopes of 6–120 dB/Octave, variable Q, time, and level. Features such as time correction 0–12 ms in 0.020 ms steps, input delay for channels 1–6, phase inversion 0–180°, output level adjustment in 0.5 dB steps, mute function, and 4 preset memories with seamless switching are integrated. Dimensions are 150 x 125 x 40 mm including mounting flange. Features 8-Channel DSP 48 kHz / 24 Bit High Resolution audio 6 x RCA inputs, switchable High / Low Level with Autosense 1 x BT interface, compatible only with BTM 2 inputs freely selectable as prioritized Auto-fade / Aux ATOM Mixer menu with dynamic preset switching and trigger control 8 x RCA analog outputs 12 V Remote-out, Autosense for High Level signal Fully parametric 30 Band EQ, also graphically usable 5 filters per channel freely configurable Filter types: High-pass, Low-pass, Shelf, Notch, Allpass, Peak-EQ Time correction 0–12 ms Input delay channels 1–6 Phase inversion 0–180° Output level adjustment in 0.5 dB steps Mute function Technical Specifications EQ range +12 to -12 dB EQ Q-factor 0.5–40 Slope 6–120 dB/Octave, variable Q, time, and level Time correction step size 0.020 ms Channel sorting: Front 1–4 Assignable channels: 5 + 6 = Front, Rear; 7 + 8 = Sub, Center, Free 4 x preset memories, seamless switching Dimensions 150 x 125 x 40 mm including mounting flange

The Mosconi Atomo 4 8 DSP from Gladen is a compact 4-Channel DSP with a 64-bit platform. The device features four analog and three digital inputs, including SP-Dif and Bluetooth streaming. An expansion to eight analog inputs is possible via MOS EXT4HLin. There are six analog outputs available, with dISC functions such as a dynamic equalizer and phase control integrated. The hardware is designed for operation in 12V and 24V onboard networks and covers an operating voltage of 8 V to 32 V. For connections, Molex industrial standards are used, allowing direct RTC access. The housing has dimensions of 86 x 86 x 34 mm and weighs 245 grams. Features 4-Channel DSP Four analog inputs Three digital inputs including SP-Dif and Bluetooth streaming Expandable to eight analog inputs via MOS EXT4HLin Six analog outputs 64-bit platform with dISC functions Dynamic equalizer and phase control Connections in Molex industrial standard Direct RTC access for volume control Compatible with 12V and 24V onboard networks Technical Specifications Operating voltage: 8 V – 32 V Operating voltage via USB: 5 V Input voltage Low-Level: 2 Vrms Input voltage High-Level: 12 Vrms Dimensions: 86 x 86 x 34 mm Weight: 245 grams

The Mosconi HLA-SLIM-HP is a High-Low Adapter from Gladen with a compact design. Without a plastic housing and plug, it requires minimal space. Made in Italy. Load capacity up to 50 watts. Remote output load capacity up to 100 mA. Easy to install. Delivery includes 1 High-Low Converter. Features High-Low Adapter Compact design No plastic housing and plug Very small and easy to install Minimal space requirement Load capacity up to 50 watts Remote output load capacity up to 100 mA Made in Italy Delivery includes: 1 High-Low Converter

The Mosconi HLA-SLIM is a High-Low Adapter from Gladen with a slim design without a plastic housing and plug. It features a very compact form factor. The maximum permissible rated load is 50 W x CH, and the remote output can handle up to 100 mA. The standby power consumption is under 0.8 mA, and the operating current draw is under 15 mA (under 30 mA in the dual version), and it also has protection against polarity reversal. The remote out delivers over 12 V at Irem-out under 100 mA, has short-circuit protection, and a maximum short-circuit duration of under 10 s. Technical specifications include total harmonic distortion under 0.01%, rise time of 10 V/µs, S/N over 100 dB, channel separation over 60 dB, common-mode noise rejection over 60 dB, and down-conversion of 4:1 V/V. The high-level input ballast impedance is 45 Ohm/2 W per channel, the maximum continuous power is 25 W RMS x CH at 4 Ohm, the maximum output signal is 3.2 Vrms at THD under 0.1%, and the minimum output load impedance is 2 kOhm. Made in Italy. Features High-Low Adapter Slim design without plastic housing and plug Very compact form factor Maximum permissible rated load 50 W x CH Remote output can handle up to 100 mA Made in Italy Technical Data Standby power consumption 12 V at Irem-out 100 dB Channel separation > 60 dB Common-mode noise rejection > 60 dB Down-conversion ratio 4:1 V/V High-level input ballast impedance 45 Ohm / 2 W per channel Maximum continuous power (sine) at 4 Ohm 25 W RMS x CH Maximum permissible rated load of the head unit 50 W x CH Maximum output signal at THD < 0.1 % 3.2 Vrms Minimum output load impedance 2 kOhm Minimum permissible load at remote out 120 Ohm Remote out maximum current output 100 mA (normal operation)

Mosconi PICO 6 8 DSP V2 is a 6-Channel DSP Amplifier from Gladen with converterless high-speed PWM output stages and a carrier frequency of over 2 MHz. The modulation occurs without a DAC directly from the 48 kHz TDM signal of the DSP, THD+N ~ 0.02 % at 1 W. Optimized for use with factory radios with six analog inputs up to 30 V, flexible routing, and 3 x input EQ and delay. Output power: 4 x 50 watts (channels 1–4) and 2 x 80 watts (channels 5–6). Two digital inputs (optical SP-Dif and coax), a Bluetooth port with SP-Dif TTL, and a BT+ extended digital audio port. Two processed line-out outputs. DSP section with 912 MHz, 32-bit audio port, 64-bit core, double precision 56 bit, and 96 kHz sample rate. Control via remote connector, BT+ control port, remote in/out, and auto-remote for high-level connection; MOLEX connectors, compact dimensions of 150 x 160 x 46 mm, weight 1150 g, and efficiency over 80 %. Features 6-Channel DSP Amplifier Manufacturer: Gladen Converterless high-speed PWM output stages with carrier frequency > 2 MHz Modulation without DAC directly from 48 kHz TDM signal Optimized for use with factory radios Flexible routing, 3 x input EQ and delay 2 x processed line-out outputs 1 x remote connector (analog, for RTC.2 potentiometer remote control) 1 x BT+ control port for MOS-BT3.0, RC-Can, MOS_USB2.0, BTS-LD4C, Gladiator Controller Controllable with pilot tone 1 x remote out, 1 x remote in, auto-remote for high-level connection MOLEX connectors Very small size with low heat generation Technical Specifications 8 x analog inputs, switchable high-level/low-level, Class SB compatible, 2–30 V 1 x optical SP-Dif, 8–96 kHz sample rate 1 x coax digital, 8–96 kHz sample rate 1 x Bluetooth port with SP-Dif – TTL, 8–96 kHz Bluetooth extended digital audio port (BT+), 8–384 kHz, 2–16 channels, synchronous digital input, direct DSP access without jitter DSP: 912 MHz, 32-bit audio port, 64-bit core Double precision 56 bit filter calculation Sample rate: 96 kHz 3 x 9 band parametric input EQ, dynamic 6 x input delay 0–3 ms, step size 0.01 ms 10 x digital input level adjusters Flexible mixer: side-separated, summing and subtracting, 10 inputs to 4 x 2 output groups 6 x 30 band or 4 x 30 band + 2 x 15 band group EQ 8 x 10 band output filters Filter types: HighPass, LowPass, HighShelf, LowShelf, Notch, Allpass 1st–4th order, Speaker EQ 8 (10) x speaker delay 0–12 ms, step size 0.01 ms 8 x speaker phase switches Flexible phase control with calculation tool Integrated analysis tools B.A.R.N.I.E. compatible THD+N ~ 0.02 % at 1 W Output power at 4 Ohm (channels 1–4): 4 x 50 watts, 3-Ohm stable, not bridgeable Output power at 4 Ohm (channels 5–6): 2 x 80 watts, 2-Ohm stable, bridgeable Output power at 4 Ohm (channels 1–4, alternative configuration): 4 x 45 watts Output power at 4 Ohm (bridged channel 5+6): 1 x 210 watts Line out: 2 x 2 Vrms Input voltage: 2 Vrms (low level) – 15 Vrms (high level) standard, up to 30 Vrms (high level) Overall efficiency: >...

The Mosconi RTC-HUB-IR from Gladen is DSP Accessories for adaptation to the MOSCONI DSP-RCD connection. It serves as an interface for analog controllers such as RTC and MOS_SWITCH. Applicable for MOSCONI DSP products with RCD connection. Not necessary for DSP 4to6, 4to6 DIF, and ONE 120.4 DSP. Features DSP Accessories Interface for analog controllers such as RTC and MOS_SWITCH Adaptation to the MOSCONI DSP-RCD connection Compatible with MOSCONI DSP products with RCD connection Not necessary for DSP 4to6, 4to6 DIF, and ONE 120.4 DSP

The Mosconi AERO8 12DSP is a 12-Channel DSP from Gladen. It features a BT Plus Port, is compatible with the BARNIE calibration system, and has a universal interface for up to 16 channels. The equipment includes active Over-ALL-Bias stabilization, optimized channel separation, and a USB-C port. For inputs, there are 8 x RCA switchable High/Low Level with Autosense, of which 4 can be freely selected as prioritized Auto-fade/Aux, 1 x S/PDIF optical, 1 x RCA digital Coax, and 1 x BT slot available. On the output side, there are 12 x RCA analog, 1 x S/PDIF optical freely assignable and volume-controlled, as well as a 12 V Remote-out. The ATOM Mixer menu allows for dynamic preset switching and trigger control. A fully parametric 30-band EQ (+12 to -12 dB, Q 0.5 to 40) and 10 freely configurable filters per channel with high-pass, low-pass, shelf, notch, all-pass, and peak EQ at 6 to 120 dB/octave with variable Q, time, and level are integrated. There is a time correction of 0 to 12 ms in 0.005 ms steps, an input delay for channels 1 to 6, a phase inversion of 0 to 180°, output level adjustment in 0.5 dB steps, a mute function, and 4 presets with switching without audio interruption. The newly designed housing measures 200 x 125 x 40 mm including mounting flange. Features 12-Channel DSP BT Plus Port Compatible with BARNIE calibration system Universal interface for up to 16 channels Active Over-ALL-Bias stabilization Optimized channel separation USB-C port Newly designed housing ATOM Mixer menu with dynamic preset switching and trigger control 4 x preset memory with switching without audio interruption Mute function Technical Specifications Inputs: 8 x RCA switchable High/Low Level with Autosense; of which 4 can be freely selected as prioritized Auto-fade/Aux; 1 x S/PDIF optical; 1 x RCA digital Coax; 1 x BT slot Outputs: 12 x RCA analog; 1 x S/PDIF optical freely assignable and volume-controlled; 12 V Remote-out Equalizer: fully parametric 30-band EQ, also usable graphically, +12 to -12 dB, Q 0.5 to 40 EQ channel assignment: fixed sorted Front 1 to 6, Rear 9 and 10; assignable channels 7 and 8 for Front/Rear, 11 and 12 for Sub/Center/Free Filters: 10 freely configurable per channel, setting without audio interruption; high-pass, low-pass, shelf, notch, all-pass, peak EQ Filter parameters: slope 6 to 120 dB/octave, variable Q, time, and level Time correction: 0 to 12 ms in 0.005 ms steps, setting without audio interruption Input delay: channels 1 to 6 for correcting time-delayed factory systems Phase inversion: 0 to 180° Level: output level adjustable in 0.5 dB steps Dimensions: 200 x 125 x 40 mm including mounting flange

The Mosconi PICO 8 10 DSP V2 is an 8-Channel DSP Amplifier from Gladen. The amplifier delivers 4 x 50 Watts at 4 Ohms (Channels 1–4, stable at 3 Ohms, not bridgeable) as well as 4 x 80 Watts at 4 Ohms (Channels 5 + 6 / 9 + 10, stable at 2 Ohms, bridgeable); additionally, it provides 4 x 45 Watts + 2 x 210 Watts in bridged operation for Channels 5 + 6 / 9 + 10. Eight switchable analog inputs (High-/Low-Level, Class SB compatible, 2–30 V) are complemented by an optical SP-Dif, a coaxial digital input, a Bluetooth port with SP-Dif – TTL, and a BT+ digital port (8–384 kHz, 2–16 channels). The DSP operates at 912 MHz, 32-Bit audio port and 64-Bit core, double precision 56-Bit filter calculation, and 96 kHz sample rate. Converterless high-speed PWM amplifiers with a carrier frequency > 2 MHz modulate directly from the 96 kHz TDM signal; THD + N ~ 0.02 % at 1 W and efficiency > 80 %. All connections are on one side; a magnetic housing cover with adjustment switches and a USB-C interface for DSP configuration are integrated. Control and connection options include Remote In/Out, Auto-Remote for high-level connection, and MOLEX connectors. Dimensions 150 x 160 x 46 mm, weight 1150 g, compact size with low heat generation. Features 8-Channel DSP Amplifier All connections on one side Magnetic housing cover with adjustment switches 8 x switchable analog inputs (High-Level / Low-Level), Class SB compatible, 2–30 V 1 x optical SP-Dif, 1 x coax digital, 1 x Bluetooth port with SP-Dif – TTL (8–96 kHz) Bluetooth extended digital audio port (BT+), 8–384 kHz, 2–16 channels, synchronous digital input, direct DSP access USB-C connection for DSP settings High-speed PWM amplifiers, converterless, carrier frequency > 2 MHz MOLEX connectors Auto-Remote for high-level connection Compact size, low heat generation Technical Specifications Output power at 4 Ohms: 4 x 50 Watts (Channel 1–4), stable at 3 Ohms, not bridgeable Output power at 4 Ohms: 4 x 80 Watts (Channel 5 + 6 / 9 + 10), stable at 2 Ohms, bridgeable Output power at 4 Ohms: 4 x 45 Watts + 2 x 210 Watts (bridged Channel 5 + 6 / 9 + 10) Line Out: 4 x 2 Vrms (Channels 7 + 8 and 9 + 10) Analog inputs: 8 x switchable High-/Low-Level, Class SB compatible, 2–30 V Digital input: 1 x optical SP-Dif (8–96 kHz) Digital input: 1 x coax digital (8–96 kHz) Bluetooth port: SP-Dif – TTL (8–96 kHz) BT+ digital port: 8–384 kHz, 2–16 channels, synchronous, direct DSP access without jitter DSP: 912 MHz, 32-Bit audio port, 64-Bit core Filter calculation: double precision 56 Bit Sample rate: 96 kHz 1 x remote connector (analog, for RTC.2 potentiometer remote control) 1 x BT+ control port (connection MOS-BT3.0 (app control), RC-Can (CAN bus control), MOS_USB2.0 (programming dongle), BTS-LD4C high-res streaming module, Gladiator controller) Controllable with pilot tone 1 x remote out, 1 x remote in Amplifiers: converterless high-speed PWM, carrier frequency > 2 MHz Modulation: without DAC directly from the 96 kHz TDM signal of the DSP...

The Mosconi RC mini is DSP Accessories from Gladen. It includes a compact DSP mini-controller. Features: Master Volume and Sub Volume with selectable priority for Main or Sub Volume. Additionally, Presets 1 to 4 and Mute are available. An IR sensor allows for 11 learnable functions. The values are displayed via LEDs. Dimensions: 77 x 45 x 24 / 35 mm. Features DSP Accessories Compact DSP mini-controller Master Volume and Sub Volume controllable Selectable priority: Main or Sub Volume Presets 1–4 Mute function IR sensor for 11 learnable functions LED display of values Dimensions 77 x 45 x 24 / 35 mm

Mosconi BTS-LD4C is DSP Accessories from Gladen. Supports BT audio streaming of uncompressed files, including Apt-X, Wave, Flac (Apple), Lossless, Mp3, A2DP. A2DP in the highest EDR specification from sources like iPads, tablets, and phones with iOS, Android, or Windows. Signal path directly into the digital DSP section of the amplifier. Compatible with PICO DSP, Atomo DSP, and Aerospace DSP. Features DSP Accessories BT audio streaming of uncompressed files like Apt-X, Wave, Flac (Apple), Lossless, Mp3, A2DP A2DP in the highest EDR specification from sources with iOS, Android, or Windows (iPads, tablets, phones) Signal path directly into the digital DSP section of the amplifier Compatible with: PICO DSP, Atomo DSP, Aerospace DSP

The Mosconi AMAS-LD4C is a DSP Accessories from Gladen with BT v 5.0 specification and support for A2DP 1.3. High resolution audio up to 24-Bit, 96 kHz. S/P-DIF digital output via Toslink and analog output RCA with 2 Vrms, both outputs can be used simultaneously. High-performance audio stereo DAC with 112 dB SNR and intelligent muting system with 120 dB mute SNR. Start & stop optimized up to 8 V and with low power consumption. Separate remote input and output. USB connection 5 V for use outside of a vehicle. Compatible with all Mosconi DSP products. Features DSP Accessories BT v 5.0 specification Supports A2DP 1.3 High resolution audio up to 24-Bit, 96 kHz S/P-DIF digital output Toslink Analog output RCA Digital and analog output can be used simultaneously Separate remote input and output USB connection for use outside of a vehicle 5 V Start & stop optimized up to 8 V Low power consumption Compatible with all Mosconi DSP products Technical Specifications Analog output: 2 Vrms Audio stereo DAC SNR: 112 dB Intelligent muting system mute SNR: 120 dB

The Mosconi ONE 6 10 DSP is a 6-Channel DSP Amplifier from Gladen with a new design and analog amplifier technology. It features a 10-Channel DSP, bridgeable speaker outputs, and Auto On (High Level). The output power is 6 x 100 Watts at 4 Ohms and 6 x 120 Watts at 2 Ohms; bridged 3 x 240 Watts at 4 Ohms. Additionally, a configuration with 4 x 95 Watts at 4 Ohms plus 1 x 250 Watts BTL is specified. The input sensitivity ranges from 0.35 V to 16 V, and the fuses are rated at 2 x 40 A. Features include an optical digital input (Toslink), optional RTC Remote Control, and analog DSP outputs with 4 x 2 Vrms. The dimensions are 290 x 210 x 55 mm. Features 6-Channel DSP Amplifier New design Analog amplifier technology 10-Channel DSP Bridgeable speaker outputs Auto On (High Level) Optical digital input (Toslink) Remote Control: RTC (optional) Technical Specifications Output power at 4 Ohms: 6 x 100 Watts Output power at 2 Ohms: 6 x 120 Watts Bridged power at 4 Ohms: 3 x 240 Watts Output power at 4 Ohms: 4 x 95 Watts Output power at 4 Ohms (BTL): 1 x 250 Watts Input sensitivity: 0.35 V to 16 V Analog DSP outputs: 4 x 2 Vrms Digital input: Optical (Toslink) Fuses: 2 x 40 A Dimensions: 290 x 210 x 55 mm Remote Control: RTC (optional)

The Mosconi ONE 4 130 is a 4-Channel Amplifier from Gladen with Class-AB technology and analog Full Mosfet technology. It can be used as a dual stereo amplifier. The features include Remote Volume Control (optional), a G-HOC slot, and a switchable Low Level / High Level input mode. Auto Sense is active in High Level mode. A 24 Volt version for truck operation is available. The output power is 4 x 130 Watts at 4 Ohms, 4 x 175 Watts at 2 Ohms; bridged at 4 Ohms 2 x 350 Watts. The input sensitivity ranges from 0.35 V to 16 V. The Crossover operates from 20 to 225 Hz with High Pass, Low Pass, or OFF modes. The dimensions are 310 x 200 x 50 mm, and the weight is 2.6 kg. Features 4-Channel Amplifier Class-AB technology Analog Full Mosfet technology Dual stereo amplifier Remote Volume Control (optional) G-HOC slot Low Level / High Level input mode (switchable) Auto Sense (only in High Level mode) 24 Volt version for truck operation available Technical Specifications Output power at 4 Ohms: 4 x 130 Watts Output power at 2 Ohms: 4 x 175 Watts Bridged power at 4 Ohms: 2 x 350 Watts Input sensitivity: 0.35 V – 16 V Crossover: 20 – 225 Hz / High Pass – Low Pass – OFF Dimensions: 310 x 200 x 50 mm Weight: 2.6 kg

The Mosconi ONE 8 10 DSP is an 8-Channel DSP Amplifier from Gladen with a new design and analog amplifier technology. It integrates a 10-Channel DSP and features bridgeable speaker outputs. The power specifications include 8 x 90 Watts at 4 Ohms, 8 x 120 Watts at 2 Ohms, and 4 x 240 Watts at 4 Ohms in bridged mode; additionally, 4 x 85 Watts and 2 x 250 Watts BTL at 4 Ohms. A Molex speaker connection allows for clean wiring and is compatible with all Plug&Play cable sets from the SoundUp program. Auto On (High Level) is integrated. Additional specifications: input sensitivity 0.35 V to 15 V, analog DSP outputs with 2 x 2 Vrms, optical digital input (Toslink), RTC remote control (optional), fuses 2 x 40 A, and dimensions 290 x 210 x 55 mm. Features 8-Channel DSP Amplifier New design Analog amplifier technology 10-Channel DSP Bridgeable speaker outputs Molex speaker connection Compatible with all Plug&Play cable sets from the SoundUp program Auto On (High Level) Technical Specifications Output power at 4 Ohms: 8 x 90 Watts Output power at 2 Ohms: 8 x 120 Watts Bridged power at 4 Ohms: 4 x 240 Watts Output power at 4 Ohms: 4 x 85 Watts BTL output power at 4 Ohms: 2 x 250 Watts Input sensitivity: 0.35 V - 15 V Fuses: 2 x 40 A Analog DSP output: 2 x 2 Vrms Digital input: Optical (Toslink) Remote control: RTC (optional) Dimensions: 290 x 210 x 55 mm

The Mosconi PRO 2 30 is a 2-Channel Amplifier from Gladen featuring MOSCONI Class D technology. DDSP - Direct DSP (bypassing all preamplifier circuits), selectable High Level / Low Level input, Autosense (only in BTL mode), and RTC for volume control via optional remote control are integrated. The Power Supply and temperature management are controlled by a microprocessor. Output power at 4 Ohms: 2 x 550 Watts. Output power at 2 Ohms: 2 x 825 Watts. Bridged power at 4 Ohms: 1 x 1650 Watts. Bridged power at 2 Ohms: 1 x 2500 Watts. Input sensitivity 0.25 V - 8.3 V (4.3 V in DDSP mode). Crossovers: Low Pass 43 - 300 Hz (24 dB/Oct) and High Pass 18 - 220 Hz (24 dB/Oct). Dimensions 500 x 205 x 55 mm, weight 5.0 kg, housing in black/silver finish. Features 2-Channel Amplifier MOSCONI Class D technology DDSP - Direct DSP (bypassing all preamplifier circuits) Selectable High Level / Low Level input Autosense (only in BTL mode) RTC - Allows volume control via a remote control (optional) Power Supply and temperature management controlled by microprocessor Housing: black/silver finish Technical Specifications Output power at 4 Ohms: 2 x 550 Watts Output power at 2 Ohms: 2 x 825 Watts Bridged power at 4 Ohms: 1 x 1650 Watts Bridged power at 2 Ohms: 1 x 2500 Watts Input sensitivity: 0.25 V - 8.3 V (4.3 V in DDSP mode) Low Pass: 43 - 300 Hz (24 dB/Oct) High Pass: 18 - 220 Hz (24 dB/Oct) Dimensions: 500 x 205 x 55 mm Weight: 5.0 kg

Discover the Mosconi Pro 1 10 evo, a 1-Channel Amplifier from Gladen that impresses with its high power and clear audio transmission. With up to 3,000 Watts RMS at 1 Ohm, it offers impressive power reserves and precise control over the speaker. Thanks to the efficient Class-D technology, it is ideal for Subwoofer and Midwoofer applications, especially in limited space. The separate signal and power architecture ensures stable and unaltered signal transmission. Adjustable input sensitivity and an optimized DirectDSP input complete the special features of this amplifier. Ultimate power. Maximum control. The MOSCONI PRO 1 10 EVO is a powerful mono amplifier designed for use in demanding car audio systems. With up to 3,000 Watts RMS at 1 Ohm, it offers high power reserves while maintaining precise control over the speaker. Thanks to the combination of efficient Class-D technology and optimized signal architecture, the PRO 1 10 EVO is suitable for both Subwoofer applications and powerful Midwoofer systems. High power density in a compact design. The Class-D amplifier allows for high output power while requiring minimal space and generating low heat. Thus, the PRO 1 10 EVO is particularly suitable for installation situations with limited space. Separate signal and power paths for detailed control. The internal architecture of the PRO 1 10 EVO consistently separates the signal path from the power supply. While the power supply processes high currents and dynamic load changes, the audio signal path remains completely decoupled from it. This separation occurs not only conceptually but also at the layout level through clearly defined signal paths and separate ground areas. The result is a significantly reduced influence from Power spikes in the power supply, Load feedback on the supply, Electromagnetic interference within the amplifier. Especially at high power levels and complex loads, the signal remains stable and unaltered. Especially at high power levels and complex loads, the signal remains stable and unaltered. Precise signal adjustment without potentiometers. The input sensitivity can be adjusted channel-separated via dip switches. This allows for reproducible and durable settings without mechanical wear parts. The adjustment is made in 0.25-volt steps in the range of 1 to 8.75 volts. Optimized DirectDSP input The integrated DirectDSP input allows for direct connection to external DSP systems. Since additional signal processing in the amplifier is omitted, the audio signal remains unchanged and low-loss. This is particularly relevant for fully DSP-based systems. Stable power output under real conditions A microprocessor-controlled power supply ensures stable output power, even with voltage fluctuations in the vehicle. An internal system additionally monitors temperature and operating status and actively controls cooling. Technical highlights Class-D mono amplifier up to 3,000 Watts RMS @ 1 Ohm high damping factor (>1000) for precise speaker control...

The Mosconi PRO 8 30 DSP is an 8-Channel DSP Amplifier from Gladen with a fully analog power section in the output range. An integrated 12-channel DSP allows for diverse system configurations. High-level compatibility and Class SB adjustment are available. Digital inputs are provided as optical (Toslink) and EXT CARD. Analog inputs are 8 x RCA and optionally EXT4HLIN via adapter. Remote controls are compatible with Mosconi RCD or RC mini, and programming is done via Micro USB. The dimensions are 500 x 205 x 55 mm with a weight of 5.2 kg. Features 8-Channel DSP Amplifier Fully analog power section in the output range Integrated 12-channel DSP High-level compatibility Class SB adjustment Digital inputs: optical (Toslink), EXT CARD Analog inputs: 8 x RCA, optionally EXT4HLIN via adapter Remote controls: Mosconi RCD, RC mini Programming: Micro USB Dimensions: 500 x 205 x 55 mm Weight: 5.2 kg Technical Specifications Output power at 4 Ohm: 4 x 90 Watts Output power at 4 Ohm: 4 x 170 Watts Output power at 2 Ohm: 4 x 115 Watts Output power at 2 Ohm: 4 x 220 Watts Bridged power at 4 Ohm: 2 x 230 Watts Bridged power at 4 Ohm: 2 x 440 Watts Input sensitivity Low Level: 2 Vrms (LL) Input sensitivity High Level: 15 Vrms / 30 Vrms (15 Vrms HL Class SB) Digital inputs: optical (Toslink) / EXT CARD Analog inputs: 8 x analog (RCA) / optionally EXT4HLIN via adapter Remote controls: Mosconi RCD or RC mini Connection programming: Micro USB Dimensions: 500 x 205 x 55 mm Weight: 5.2 kg

The Mosconi Pro 4 30 AAB EVO, a 4-channel high-performance amplifier from Gladen, provides outstanding sound precision through its innovative AAB technology. This technology differs from classical amplifiers by enabling distributed control at the component level, leading to stable and linear signal processing. The amplifier also impresses with its ability to precisely adjust the input sensitivity via dip switches and its compatibility with DSP systems thanks to the optimized DirectDSP input. With robust performance that remains clean even under high loads and real conditions, the Mosconi Pro 4 30 AAB EVO offers both flexibility and control for demanding car audio systems. Analog reference. Designed for maximum sound precision. The MOSCONI PRO 4 30 AAB EVO is a 4-channel power amplifier for demanding car audio systems, where sound quality and control are the focus. At the center is the AAB technology, an amplifier concept that fundamentally differs from classical Class-AB power amplifiers. Instead of a common control for all power transistors, the output stage operates with distributed control at the component level. The result is particularly stable and linear signal processing, even under real conditions such as temperature changes, load fluctuations, or dynamic music signals. AAB technology: Control at the component level. In classical amplifiers, the entire output stage is controlled via a common operating point. It is assumed that all power transistors operate identically, which is never fully the case in practice. The AAB technology takes a different approach. Each individual power transistor is monitored and controlled separately. Local control loops ensure that each component remains in the optimal operating range at all times – regardless of: Temperature, Current flow, Load behavior, Component tolerances. This results in a significantly more stable and uniform operation of the entire power amplifier. Stability instead of compromise. This distributed architecture reduces typical problems of classical amplifiers: Thermal drift, Unequal distribution between transistors, Unstable operating points, Dependence on component tolerances. Even at high power levels, complex speaker loads, and dynamic music signals, the power amplifier remains controlled and predictable. Separate signal and power paths form the clean basis for sound. The internal architecture consistently separates the sensitive audio signal path from the power supply. High currents and rapid load changes occur in the power supply. The signal path operates with very low voltages and is sensitive to interference. By clearly separating layout and ground levels, it is prevented that these influences enter the audio signal. This specifically reduces Interference from current peaks, Feedback from the load on the supply, Internal interference within the power amplifier. The signal remains clean, stable, and uncolored even at high power. Thus, the signal remains clean, stable, and uncolored...

The Mosconi ONE 4 130 is a 4-Channel Amplifier from Gladen with Class-AB technology and analog Full Mosfet technology. It can be used as a dual stereo amplifier. The features include Remote Volume Control (optional), a G-HOC slot, and a switchable Low Level / High Level input mode. Auto Sense is active in High Level mode. A 24 Volt version for truck operation is available. The output power is 4 x 130 Watts at 4 Ohms, 4 x 175 Watts at 2 Ohms; bridged at 4 Ohms 2 x 350 Watts. The input sensitivity ranges from 0.35 V to 16 V. The Crossover operates from 20 to 225 Hz with High Pass, Low Pass, or OFF modes. The dimensions are 310 x 200 x 50 mm, and the weight is 2.6 kg. Features 4-Channel Amplifier Class-AB technology Analog Full Mosfet technology Dual stereo amplifier Remote Volume Control (optional) G-HOC slot Low Level / High Level input mode (switchable) Auto Sense (only in High Level mode) 24 Volt version for truck operation available Technical Specifications Output power at 4 Ohms: 4 x 130 Watts Output power at 2 Ohms: 4 x 175 Watts Bridged power at 4 Ohms: 2 x 350 Watts Input sensitivity: 0.35 V – 16 V Crossover: 20 – 225 Hz / High Pass – Low Pass – OFF Dimensions: 310 x 200 x 50 mm Weight: 2.6 kg

The Mosconi PICO 1 is a 1-Channel Amplifier from Gladen with full-range PWM amplification technology. The output power is 1 x 750 Watts RMS at 2 Ohms and 1 x 500 Watts at 4 Ohms. The circuit uses a separate, synchronized modulation and fast high-current MOSFETs. High-level and low-level inputs as well as dedicated filters are available. An auto-on feature in high-level operation (SE or BTL mode), the option for remote volume control, and Molex connectors are integrated. A low-pass filter from 45 to 310 Hz (12 dB/Oct) and a subsonic filter at 13 Hz (12 dB/Oct) are included. Features 1-Channel Amplifier Full-range PWM amplification technology Separate, synchronized modulation Fast high-current MOSFETs High-level and low-level inputs Dedicated filters Auto-on feature (only high level, SE or BTL mode) Remote volume control (optional) Molex connectors Technical Specifications Output power at 4 Ohms: 1 x 500 Watts Output power at 2 Ohms: 1 x 750 Watts RMS Input voltage (signal): 0.3 V to 20 V Efficiency: > 75 % Auto-On (only high level): Off to BTL Low-pass filter: Off or 45 to 310 Hz (12 dB/Oct) Subsonic filter (always on): 13 Hz (12 dB/Oct) Dimensions: 150 x 115 x 46 mm Weight: 1050 grams