Znaleziono 2 produkty pasujące do Twojego wyszukiwania: phaser w sklepach 2:

Wróć do biura nie zapominając niczego! Kupuj Toner Xerox Phaser 6120 i nich koledzy Ci zazdroszczą! Rodzaj: Toner

ESP-PLC is a Plug from Emphaser with a globally patented coupling system. This system allows for the connection of power, RCA, and remote cables. The Plug features a reverse polarity safe design. Compatible with 12 V Plus power cables as well as ground cables. Features Plug Globally patented coupling system Connection of power, RCA, and remote cables Reverse polarity safe design Compatible with 12 V Plus power cables Compatible with ground cables

Emphaser ECP-G6 is a 6.5 inch (16.5 cm) Speaker Set with CRYSTALGRAIN compound membrane and FlowMax aluminum die-cast basket. The 25 mm textile dome Tweeter with neodymium magnet, protective grille with large opening area, and mounting housing for two radiation angles complement the construction. Strontium ferrite magnets, butyl rubber surrounds, dual-layer copper wire voice coils on aluminum carriers, Connex centering spiders with integrated lead wires, as well as the Emphaser screw terminal with gold-plated contact surfaces are integrated. The crossovers operate with separate branches, 12 dB woofer/12 dB tweeter filters, two-stage level adjustment, and use air coils, MKP capacitors, and MOX resistors; pre-assembled connection cables are included. Rated power handling is 120 Watts RMS, nominal impedance is 4 Ohm, sensitivity is 90 dB, and frequency response is 65 Hz – 22 kHz. Installation diameter is 145 mm and installation depth is 64 mm. Features 6.5 inch (16.5 cm) Speaker Set CRYSTALGRAIN compound membrane with inverted dust cap FlowMax aluminum die-cast basket with optimized temperature management Strontium ferrite magnet on the mid-woofer Butyl rubber surround Dual-layer copper wire voice coil on aluminum voice coil carrier Connex centering spider with integrated voice coil lead Emphaser screw terminal with gold-plated contact surfaces 25 mm textile dome Tweeter with neodymium magnet Housing with low installation depth Protective grille with very large opening area Mounting housing for installation in two radiation angles Separate crossovers for woofer and tweeter Two-stage level adjustment for the Tweeter Use of air coils, MKP capacitors, and MOX resistors in the direct signal path Pre-assembled connection cables Delivery includes: 2 Tweeters, 2 woofers/midrange drivers, 4 crossovers Speaker cover optional: ESP-GR6 Technical Specifications Rated power handling: 120 Watts RMS Nominal impedance: 4 Ohm Sensitivity (1 W/1 m): 90 dB Frequency response: 65 Hz – 22 kHz Speaker size: 165 mm Tweeter dome: 25 mm Installation diameter: 145 mm Installation depth: 64 mm Filter slope of crossovers: 12 dB woofer / 12 dB tweeter

The ECP-M6-E2 from Emphaser is a 6.5" (16.5 cm) speaker set that delivers both precise and highly detailed sound. Equipped with the new M25TX tweeter, it impresses with an aluminum diaphragm and an impressive frequency range up to 40 kHz. The woofer in the set uses an innovative aluminum-paper sandwich cone and features a modern FlowMax basket. The carefully engineered crossovers allow flexible installation and ensure minimal signal loss. With a rated power handling of 120 W RMS and a sensitivity of 90 dB, the set delivers excellent sound quality at both low and high volume levels. Included are two tweeters, two woofer/midrange drivers, and four crossovers. The woofer For the high precision and natural sound of the ECP-M6 Edition 2, the new aluminum-paper compound diaphragm is responsible. It combines high damping and stiffness with the direct transient response known from rigid diaphragms for extremely detailed music reproduction. The diaphragm thickness has been chosen to provide the stability for powerful bass attacks and the necessary lightness for high-resolution, naturally sounding midrange. The durable butyl surround in M-design ensures that the ECP-M6 Edition 2 does not lose any of its precise reproduction even at high levels and thus large diaphragm excursions. The clean, crisp bass foundation and the enormous level-handling capabilities are owed to the component speaker's powerful 100 x 15 mm strontium ferrite magnet, the high-duty 30 mm voice coil and the woofer's 6 mm thick, flat-milled pole plate. The carrier of the carefully selected components is the minimalist-designed EMPHASER FlowMax aluminum die-cast basket. The very open construction with its delicate struts gives the rearward-radiated sound maximum freedom and ensures a minimum of unwanted reflective surfaces that could affect the sound. Regardless of the delicate construction, the sophisticated basket design offers enormous stability. Another innovation is the EMPHASER screw terminal: although built very solidly, it has a very small footprint and, with a mechanically secure connection via solid hexagon screws and gold-plated contact surfaces, ensures reliable signal transmission. The tweeter The new ECP-M25TX tweeter with a 25 mm aluminum diaphragm delivers precise, highly detailed performance up to 40 kHz. The dome geometry provides a consistent dispersion pattern for excellent sound across a wide range of installation situations. In addition to the low weight of the diaphragm, surround and voice coil, it is above all the deliberate omission of ferrofluid that allows the tweeter to play very lively, spacious and without coloration. The protective grille, with its very large open area, offers high acoustic transparency and low reflective surfaces. The supplied mounting housing enables installation at two different dispersion angles for perfect adaptation to the vehicle’s acoustics. The crossover For increased installation convenience, the crossovers have been split into...

The ECP-M6X from Emphaser is a 6.5 inch speaker set that impresses with its high-quality craftsmanship and precise music reproduction. The woofer features an aluminum diaphragm with high rigidity and a butyl surround, ensuring stable performance even at high volumes. The powerful strontium ferrite magnet and 38 mm voice coil contribute to a strong, clean bass foundation. The ECP-M25TX tweeter delivers detailed sound reproduction up to 40 kHz and can be flexibly installed in the vehicle using the included surface-mount housing. With a rated power handling of 120 watts RMS and a sensitivity of 90 dB, the set is ideal for discerning music lovers. The package includes two tweeters, two woofers/midrange drivers, and an optional speaker grille. The Woofer The new aluminum diaphragm is responsible for the high precision of the ECP-M6X. It combines high stiffness and a direct transient response for extremely detailed music reproduction. The diaphragm thickness is chosen to provide stability for powerful bass attacks and the necessary lightness for precise midrange. The durable butyl surround ensures that the ECP-M6X maintains its precise reproduction even at high levels and thus large diaphragm excursions. The clean, crisp bass foundation and level capabilities are thanks to the powerful 100 x 20 mm strontium ferrite magnet, the highly durable 38 mm voice coil, and the 6 mm thick, flat-milled pole plate of the woofer. The phase plug ensures optimal sound radiation at an angle – ideal for the intended installation in the footwell of the vehicle door. The carefully selected components are mounted on the minimalist Emphaser FlowMax aluminum die-cast basket. The very open design with delicate struts gives the rear-radiated sound maximum freedom and minimizes unwanted reflective surfaces that could affect the sound. Despite its delicate construction, the sophisticated basket design offers enormous stability. Another innovation is the new Emphaser screw terminal: although very robust, it requires very little space and ensures secure signal transmission with its solid hexagon screws and gold-plated contact surfaces. The Tweeter The new ECP-M25TX tweeter with a 25 mm aluminum diaphragm plays precisely and with great attention to detail up to 40 kHz. The diaphragm geometry offers a uniform directivity pattern for excellent sound in various installation situations. Besides the low weight of the diaphragm, surround, and voice coil, the deliberate omission of ferrofluid is mainly responsible for the tweeter’s lively, spatial, and distortion-free sound. The protective grille offers high sound permeability and low reflection surfaces due to its very large opening area. The included mounting housing allows installation at two different radiation angles for perfect adaptation to the vehicle acoustics. Main Features Woofer 6.5 inch Emphaser FlowMax aluminum die-cast basket 100 x 20 mm Strontium Ferrite Magnet Aluminum Diaphragm with Phase Plug Faraday Copper Cap 38 mm...

Xerox Toner BLACK Hi Cap. Phaser 6130 (2,5K) - 106R01285 Producent: Xerox Rodzaj produktu: Toner oryginalny - Xerox Symbol: 106R01285 Producent: Xerox Kolor:...

Discover the ESP FH10 from Emphaser – a high-quality fuse holder specifically designed for 10 mm² power cables. This ATC fuse holder is ideal for car HiFi installations and electrical wiring in vehicles. Included in the package are two 15 A ATC fuses, ensuring reliable protection. The robust, splash-proof housing and temperature-resistant material provide comprehensive protection against overload, cable fire, and short circuits. For easy handling, a hex key for replacing the fuses is included. This versatile fuse holder is perfect for use in cars, campers, motorhomes, trucks, and buses. Features High-quality ATC fuse holder: Designed for 10 mm² power cables, ideal for car HiFi installations and electrical wiring in vehicles. Includes fuses: Package contains 2 x 15 A ATC fuses for reliable protection. Comprehensive protection: Effective safeguarding against overload, cable fire, and short circuits. Robust design: Splash-proof housing with silicone sealing rings on the lid and cable entries – protects against moisture and splashing water. Temperature-resistant material ensures durability in various environments. Easy handling: Supplied hex key makes fuse replacement simple. Versatile applications: Suitable for cars, campers, motorhomes, trucks, and buses. Scope of delivery 1x ATC fuse holder 2x 15 A ATC fuses 1x hex key

The ESP FH25 from Emphaser is a high-quality fuse holder specifically designed for 25 mm² power cables. It is ideal for car HiFi installations and electrical wiring in vehicles. With an 80 A M-ANL fuse included in the package, it provides effective protection against overload, cable fire, and short circuits. The robust, splash-proof housing, reinforced with silicone sealing rings, reliably protects against moisture. Thanks to the temperature-resistant material, the fuse holder is also suitable for long-term use in various environments. Easy installation and maintenance are ensured by the included Allen key. The ESP FH25 is versatile and suitable for cars, campers, motorhomes, trucks, and buses. Features High-quality M-ANL fuse holder: Designed for 25 mm² power cables, ideal for car HiFi installations and electrical wiring in vehicles. Includes fuse: Package contains 1 x 80 A M-ANL fuse for reliable protection. Effective protection: Reliably prevents overload, cable fire, and short circuits. Splash-proof thanks to silicone sealing rings on the cover and cable entries – reliably protects against moisture. Temperature-resistant material for long-term use in various environments. Easy installation and maintenance: Included Allen key allows for easy fuse replacement. Wide range of applications: Suitable for cars, campers, motorhomes, trucks, and buses. Scope of delivery 1x M-ANL fuse holder 1x 80 A M-ANL fuse 1x Allen key

The ESP FH50 from Emphaser is a fuse holder specifically designed for use with 50 mm² power cables. This model is ideal for car HiFi installations and electrical wiring in vehicles. The fuse holder provides effective protection against overload, cable fires, and short circuits. With a robust, splash-proof housing, it remains reliable under various conditions. The included 60 A M-ANL fuses offer additional protection, while the supplied Allen key allows for easy replacement. It is suitable for versatile use in cars, campers, motorhomes, trucks, and buses. Features High-quality M-ANL fuse holder: Designed for 50 mm² power cables, ideal for car HiFi installations and electrical wiring in vehicles. Includes fuses: Delivery includes 2 x 60 A M-ANL fuses for reliable protection. Effective protection: Protects against overload, cable fires, and short circuits. Robust housing: Splash-proof thanks to silicone sealing rings on the lid and cable entries – protects against moisture. Temperature-resistant material for reliable use under various conditions. Easy handling: Supplied Allen key allows for uncomplicated fuse replacement. Versatile application: Suitable for cars, campers, motorhomes, trucks, and buses. Scope of delivery 1x M-ANL fuse holder 2x 60 A M-ANL fuses 1x Allen key

The EM-BMWF1 BMW speaker set from Emphaser is a 4-inch 2-way component system specifically designed for BMW and MINI vehicles. It features vehicle-specific connectors and offers an aluminum diaphragm, aluminum die-cast basket, as well as a durable Connex centering spider and rubber surround. With a frequency response of 150 Hz to 22 kHz and a sensitivity of 87 dB, this system delivers clear and powerful sound to your vehicle. The package includes 2 tweeters, 2 midrange speakers, and 2 crossovers. Ideal for various BMW and MINI models, this speaker set ensures excellent sound quality and easy installation. Vehicle Compatibility BMW Vehicles Front Doors F06 F12 / F13 F20 / F21 / F22 / F23 / F25 / F26 F30 / F31 / F32 / F33 / F34 / F36 / F39 F40 / F44 / F45 / F46 / F48 / F49 F80 / F82 / F83 / F87 G01 / G02 / G05 / G06 G11 / G12 G20 / G21 / G22 / G23 / G28 G30 / G31 / G32 G80 L15 (i8) BMW Vehicles Rear Doors F06 F25 / F26 F30 / F31 / F34 / F36 / F39 F40 / F44 / F48 / F49 F80 G01 / G02 / G05 / G06 G11 / G12 G20 / G21 / G28 G30 / G31 / G32 G80 BMW Vehicles Rear Side Panels F23 F32 / F33 F45 / F46 F82 / F83 G22 / G23 MINI Vehicles Front Doors F54 / F55 / F56 / F57 / F60 MINI Vehicles Rear Doors F54 / F55 / F56 / F57 / F60 Main Features 4-inch 2-way component system compatible with BMW and Mini vehicles vehicle-specific connectors aluminum diaphragm aluminum die-cast basket durable Connex centering spider and rubber surround Faraday copper cap 25 mm tweeter with fabric dome crossover with 12 dB/6 dB filtering at 4,000 Hz switchable 150 Hz/6 dB high-pass filter Technical Specifications Frequency response: 150 Hz – 22 kHz Nominal impedance: 4 Ohms Sensitivity 1W/1m: 87 dB Nominal power handling: 30 Watts RMS Scope of Delivery 2 tweeters 2 midrange speakers 2 crossovers

Oryginalne materiały eksploatacyjne są zaprojektowane i przetestowane z myślą o produktach Xerox, tak aby zapewniały najlepszą jakość obrazu, dłuższy okres e...

The ECP-M25T is a Dome Tweeter from Emphaser with a 25 mm fabric dome and a 25.4 mm voice coil. The CNC-machined aluminum housing is complemented by a neodymium magnet system. The design operates without ferrofluid and uses a protective grille with a very large opening area. The package includes mounting housings for two different radiation angles. The nominal power handling is 25 watts RMS, the frequency response is 2.7 – 22 kHz, and the impedance is 4 Ohm. The installation depth is 16 mm, and the installation diameter is 45 mm. Features Dome Tweeter CNC-machined aluminum housing Neodymium magnet system Without ferrofluid Protective grille with a very large opening area Mounting housings for two different radiation angles included Technical Data Fabric dome: 25 mm Voice coil: 25.4 mm Nominal power handling: 25 watts RMS Frequency response: 2.7 – 22 kHz Impedance: 4 Ohm Installation depth: 16 mm Installation diameter: 45 mm

The EM-FTF2 Fiat speaker set from Emphaser is a high-quality 2-way component system, specially developed for models such as the Fiat Ducato III, Fiat Ducato Series 8, Peugeot Boxer II, and Citroën Jumper II. The speakers feature woofers with aluminum diaphragms and Cambridge surrounds, providing detailed sound performance and high linear cone excursion. The tweeters with 20 mm fabric dome and coupling volume are characterized by brilliant and spatial reproduction. With the elaborately designed crossover, which ensures a harmonious frequency response, you achieve true hi-fi sound without the need for a separate subwoofer. The set includes vehicle-specific connectors and comes with all necessary components for easy installation. The Woofer The core element of the speaker set is the woofers with Cambridge surround in the “M” design and an aluminum diaphragm – the high sound conductivity and stability of aluminum form the basis for precise music reproduction and excellent dynamics. The strength of the diaphragm material is chosen to provide stability for impressive bass attacks as well as the necessary lightness for precise midrange. Thanks to the large magnet drive with Faraday copper cap and the low total weight of the moving unit, the speaker system achieves high efficiency and thus its convincing performance – even when the EM-FTF2 is operated on a “normal” radio. The Tweeter The tweeters have a 20 mm fabric dome with additional coupling volume for a low resonance frequency and thus an extended playback range. The diaphragm geometry offers a uniform directivity pattern for excellent sound in the original installation location and impresses with its brilliance and spatial reproduction. In addition to the low weight of diaphragm, surround, and voice coil, the deliberate omission of ferrofluid is mainly responsible for the tweeter’s lively, spatial, and distortion-free sound. The tweeters integrate perfectly with the recordings of the Remi front dimming system – simply snap into the original mounts, done. The Crossover The elaborately designed crossovers are additionally equipped with an LCR resonant circuit to perfectly tune the sound to the acoustics in the driver’s cabin. The result is a harmonious frequency response down to the bass range; a separate subwoofer is no longer necessarily required for audiophile hi-fi music enjoyment. The crossovers are directly on the woofer or as cable crossovers on the tweeter, allowing easy installation – plug & play with the original connector. Main Features 6.5 inch 2-way component system Suitable for Fiat Ducato III, Fiat Ducato Series 8, Peugeot Boxer II, or Citroën Jumper II Vehicle-specific connectors Optimized frequency response for true hi-fi sound Woofers with aluminum diaphragm for detailed sound performance Cambridge surround for high linear diaphragm excursion Powerful magnet, Faraday copper ring for a stable magnetic field 12 dB/12 dB/oct. crossover @ 3400 Hz, equipped with high-quality components...

Wróć do biura nie zapominając niczego! Kupuj Toner Xerox Phaser 6128MFP i nich koledzy Ci zazdroszczą!

Wróć do biura nie zapominając niczego! Kupuj Toner Xerox Phaser 7750 Czarny i nich koledzy Ci zazdroszczą! Rodzaj: Toner Kolor: Czarny Właściwości: Oryginał

Wróć do biura nie zapominając niczego! Kupuj Toner Xerox Phaser 63006350 i nich koledzy Ci zazdroszczą! Rodzaj: Toner Oryginał Wydajność: 450 Strony

Ultra kompaktowa drukarka Phaser 3020 została opracowana z myślą o indywidualnych użytkownikach i niewielkich zespołach roboczych. Jej konfiguracja jest szyb...

Wróć do biura nie zapominając niczego! Kupuj Toner Xerox Phaser 6120 Magenta i nich koledzy Ci zazdroszczą! Rodzaj: Toner Kolor: Magenta

The ECP-G4 from Emphaser is a 4-inch speaker set that impresses with innovative technologies. Key features include the CRYSTALGRAIN compound diaphragm of the woofer and the 25 mm fabric dome of the tweeter. The speaker set offers powerful strontium ferrite magnets and an Emphaser FlowMax aluminum die-cast basket for optimal sound stability. The crossover is specially designed to ensure the best possible phase alignment, while the two-stage level adjustment and high-quality components provide precise sound output. With a rated power handling of 60 watts RMS and a sensitivity of 84dB, the ECP-G4 delivers balanced sound performance in the frequency range from 95 Hz to 22 kHz. The package includes tweeters, woofers/midrange drivers, and crossovers. The Woofer The warmth of the GRAVITY sound is thanks to the new CRYSTALGRAIN compound diaphragm. It combines the high stiffness and damping effect of paper with the direct transient response of the quartz crystals applied on the top side. The diaphragm thickness is chosen to provide stability for powerful bass attacks and the necessary lightness for precise midrange. The durable surround ensures that the ECP-G4 does not lose any of its precise reproduction even at high levels and thus high diaphragm excursions. The clean, crisp bass foundation and its level capabilities are owed to the strong strontium ferrite magnets of the mid/woofer. The carefully selected components are mounted on the minimally designed Emphaser FlowMax aluminum die-cast basket. The very open construction with delicate struts gives the rear-radiated sound maximum freedom and minimizes unwanted reflective surfaces that could affect the sound. Despite its delicate design, the construction offers maximum stability. Another innovation is the new Emphaser screw terminal: although very solidly built, it requires very little space and ensures secure signal transmission with its force-fit connection using massive hexagon screws and gold-plated contact surfaces. The Tweeter The 25 mm fabric dome tweeter impresses with its warm sound and can reproduce even the smallest musical details. The diaphragm geometry offers a uniform directivity pattern for excellent sound in various installation situations. Besides the low weight of diaphragm, surround, and voice coil, it is especially the deliberate omission of ferrofluid that makes the tweeter play so lively, spatial, and distortion-free. The protective grille offers high sound permeability and low reflections due to its very large opening area. The supplied mounting housing allows installation at two different radiation angles for perfect adaptation to the vehicle acoustics. The Crossover The components of the crossovers have been defined through intensive test series in the lab and in various vehicles to achieve the best possible phase alignment of the components with minimal space requirements. The result is authentic-sounding voices and instruments with precise stage imaging and impressive spatial...

ECP-M6 from Emphaser is a 6.5" (16.5 cm) speaker set that is characterized by a detailed and low-distortion reproduction of music. The woofer with its aluminum membrane offers stable bass performance and precise mids, supported by a powerful strontium ferrite magnet and a Connex centering spider. The 25 mm tweeter impresses with a warm sound and high sound permeability. The crossovers ensure optimal phase position of the components for authentic sound reproduction. The main features include an aluminum die-cast basket for the woofer, a fabric dome for the tweeter and high-quality components for the crossovers. Technically, the set offers 120W RMS nominal power handling and a sensitivity of 91 dB. The scope of delivery includes tweeters, woofers/midrange speakers, crossovers and speaker grills. The woofer Our aluminum woofer membrane is ideal for detailed and extremely low-distortion reproduction due to its hardness and high natural resonance frequency. The thickness of the membrane is selected so that it offers the stability for heavy bass attacks and the necessary lightness for precise mids. The "M" design of the Cambridge surround ensures that the ECP-M6 loses none of its precise reproduction even at high levels and thus high membrane deflections. The Compos owe their clean, crisp bass foundation and their level capabilities to the powerful strontium ferrite magnets of the mid/woofer. Details such as the aluminum die-cast basket with optimized temperature management, the butyl rubber surround, a copper cap on the pole core, a 2-layer copper wire voice coil on a temperature-resistant aluminum voice coil carrier or the durable Connex centering spider with woven voice coil lead underline the quality of these speakers. The tweeter The 25 mm tweeter with fabric dome impresses with its warm sound and can reproduce even the smallest musical details. The membrane geometry offers a uniform directional characteristic for excellent sound in a wide variety of installation situations. In addition to the low weight of the membrane, surround and voice coil, the conscious decision not to use ferrofluid is primarily responsible for the tweeter playing so lively, spatially and without discoloration. The crossover The components of the crossovers have been defined in intensive series of tests in the laboratory and in various vehicles in order to achieve the best possible phase position of the components. The result is authentic-sounding voices and instruments with precise stage imaging and impressive spatial depth. The crossovers are divided into separate housings for the tweeter and bass branches. This enables easy installation in the original installation location without having to lay new cables across the vehicle. Main features woofer 16.5 cm woofer Aluminum die-cast basket with optimized temperature management Aluminum membrane with inverse aluminum dustcap Butyl rubber surround, in M-design for low distortion even at high...