48834 produits ont été trouvés correspondant à votre recherche pour casque dans 30 shops:

Caractéristiques ABS textile doux doublure (100 % polyester) Coussinets de joues amovibles et lavables visière claire et inrayable boucle jugulaire rapide purge d’air à l’avant mécanisme de la visière intégrée, aucun outil nécessaire pour modifier la visorvisor pare-soleil incl. ECE 22.05 Note Veuillez noter que tant que rien d′autre n′est indiqué dans la description de l′article, tous les casques qui ont une visière en standard sont livrés avec une visière claire, même si elle est représentée différemment.

Casque léger, compact et aéré Construction In-Mold avec une coque intérieure en mousse EPS injectée sous une fine coque extérieure en polycarbonate, qui assure un maintien compact sur la tête Grandes ouvertures d'aération pour une circulation d'air maximale Finition de haute qualité et design épuré Protection accrue Conçu conformément au label Petzl TOP AND SIDE PROTECTION Design enveloppant pour une protection optimale contre les chocs latéraux, avant et arrière Convient pour le ski de randonnée : le premier casque de ski de randonnée certifié CE Ventilation optimale en montée et en descente Le casque peut être porté facilement du début à la fin de la randonnée La conception spéciale à l'avant est conçue pour porter des lunettes de ski L'élastique à l'arrière est compatible avec les sangles des lunettes de ski Le tour de tête semi-rigide est facile à ajuster, même avec des gants Deux clips pour lampe frontale à l'avant et un élastique à l'arrière pour fixer une lampe frontale Compatible avec les visières VIZION et SKREEN Remarque : Le casque ne répond pas aux exigences de la norme EN 1077 pour les skieurs alpins Matériau : Coque extérieure en polycarbonate, coque intérieure en polystyrène expansé (EPS), sangles en polyester Certification(s) : CE EN 12492, CE casque de ski de randonnée, UIAA Poids : 240 g

NIVEAU UP Design et technique de nouveau niveau Les jeux sont encore plus amusants ! Avec notre nouveau casque/support pour casque, vous pourrez profiter de...

Modèle Vito Duomo Caractéristiques Coquille thermoplastique Doublure amovible et lavable Fermeture micrométrique facile à utiliser Ouverture mentonnière, ouverture d air supérieure, ouverture d air arrière Visière claire anti-rayures Fermeture de la visière Poids 1 500 gr. +/- 50 gr. Certifié selon ECE 22.06 Note Veuillez noter que, tant que rien d autre n est écrit dans la description de l article: Tous les casques seront livrés uniquement avec la certification ECE par défaut, même si elle est indiquée différemment. Tous les casques qui ont une visière seront livrés avec une visière transparente, même si cela est indiqué différemment.

Découvrez le casque de ski ANDROID : robustesse, confort inégalé et sécurité optimale pour tous les skieurs. Profitez de chaque descente en toute confiance et style. Casque de ski pour une protection et un confort inégalés sur les pistes L'ANDROID est un casque de ski conçu pour offrir une protection optimale tout en restant accessible. Sa robustesse en fait un choix idéal pour les skieurs occasionnels, garantissant une sécurité sans compromis sur les pistes. Ce casque allie qualité et performance, permettant à chacun de profiter des plaisirs de la montagne en toute sérénité. Doté de la technologie V-FIT, l'ANDROID s'ajuste parfaitement à la morphologie de votre tête, assurant un confort inégalé. Que vous soyez novice ou expert, ce casque polyvalent vous accompagnera dans toutes vos aventures, vous permettant de skier avec confiance et style, quelles que soient les conditions. Atouts Robustesse et sécurité: Protection optimale sur les pistes, rendant la sécurité accessible. Confort inégalé: Ajustement parfait grâce à la technologie V-FIT. Polyvalence: Adapté à tous les niveaux de skieurs, des débutants aux expérimentés. Caractéristiques techniques Protection optimale pour chaque descente. Casque abordable avec une qualité irréprochable. Technologie V-FIT pour un ajustement personnalisé. Ventilation réglable pour un confort optimal. Doublure détachable et lavable pour un entretien facile. Molette de serrage à l'arrière pour un maintien sécurisé. Poids léger de 490g pour un confort accru.

Casque casque sans fil, longue portée, casque d'écoute de bureau, casque sans fil pour jeux de jeu

Modèle Vito Duomo Caractéristiques Coquille thermoplastique Doublure amovible et lavable Fermeture micrométrique facile à utiliser Ouverture mentonnière, ouverture d air supérieure, ouverture d air arrière Visière claire anti-rayures Fermeture de la visière Poids 1 500 gr. +/- 50 gr. Certifié selon ECE 22.06 Note Veuillez noter que, tant que rien d autre n est écrit dans la description de l article: Tous les casques seront livrés uniquement avec la certification ECE par défaut, même si elle est indiquée différemment. Tous les casques qui ont une visière seront livrés avec une visière transparente, même si cela est indiqué différemment.

Casque pour usage universel STIHL 0000-888-0810 Function Basic Le casque Function Basic dispose d?une large visière en nylon et d?un protège-oreilles relevable et réglable. Protection anti poussière au-dessus de la visière. large visière en nylon très enveloppante. Protège-oreilles relevables et réglables. Matériaux : HDPE. Normes : EN 352. EN 397. EN 1731. SNR 24. Ventilation du casque. La thermographie montre les avantages d'un casque avec ventilation de série (à droite). La température baisse de deux à trois degrés et l'humidité diminue de 50 %. La ventilation apporte un réel confort.

Une poignée et se débarrasser de l'appareil. Grâce à notre support pour casque branché, vous avez toujours votre casque ou votre casque à portée de main, tout en étant...

Caractéristiques Coquille thermoplastique Excellent ajustement Doublure amovible et lavable Fermeture micrométrique facile à utiliser Ventilation La visière longue résistante aux rayures Bouclier solaire intégré Certifié CEE 22.06

JBL Tune 720BT Blanc, avec un design pliable, Bluetooth 5.3, réduction active du bruit et batterie à charge rapide.Bluetooth 5.3 - Connexion multipoint - Son JBL Pure Bass - Appels mains libres avec Voice Aware - Câble audio détachable - Réduction active du bruit - Batterie avec 76 heures d´autonomie - Charge rapide - Design pliable - Blanc.Découvrez l´immersion acoustique avec le nouveau casque JBL Tune 720BT en Blanc.Ces écouteurs sans fil vous offrent une expérience sonore extraordinaire grâce à leur technologie JBL Pure Bass Sound.De plus, ils sont dotés d´une réduction du bruit qui vous permettra de rester concentré sur le sport, et leur design pliable et léger vous offrira un confort exceptionnel pendant l´utilisation.Son JBL Pure Bass.Le JBL Tune 720BT se distingue par son impressionnant son JBL Pure Bass, qui vous offre une expérience audio riche et immersive.Grâce à cette technologie, vous profiterez de basses profondes et puissantes, comme si vous étiez dans une salle de concert.Bluetooth 5.3.Équipés de la dernière version de la technologie sans fil Bluetooth 5.3, ces écouteurs vous permettent de diffuser de la musique de haute qualité sans câbles emmêlés.Oubliez les limitations et profitez d´une connexion stable et rapide avec votre smartphone ou d´autres appareils compatibles.Application JBL Headphones avec égaliseur.Ce modèle a accès à une application JBL Headphones gratuite pour personnaliser facilement votre expérience d´écoute.L´égaliseur intégré vous permet d´adapter le son à vos préférences, tandis que les invites vocales vous guident dans votre langue à travers les fonctions du modèle Tune 720BT, assurant une configuration optimale.Batterie jusqu´à 76 heures.Ces écouteurs JBL offrent jusqu´à 76 heures de lecture ininterrompue, vous permettant de profiter de votre musique préférée toute la journée sans vous soucier de la batterie.De plus, avec seulement 5 minutes de charge, vous obtiendrez 3 heures de lecture supplémentaires, vous assurant de ne jamais manquer de musique.Design pliable et léger.Les écouteurs JBL Tune 720BT s´adaptent parfaitement à vos oreilles et offrent un confort exceptionnel même après de longues sessions d´écoute. De plus, leur design pliable les rend facilement transportables, vous permettant de les emporter avec vous dans votre sac à dos ou votre sac n´importe où.Spécifications techniques JBL Tune 720BT Blanc - Casque Bluetooth.Performance.Type de produit : Casque.Style de port : Arceau.Utilisation recommandée : Appels/Musique.Type de casque : Binaural.Couleur du produit : Blanc.Pliable : Oui.Ports et interfaces. Technologie de connectivité : Sans fil.Bluetooth : Oui.Profils Bluetooth : A2DP, AVRCP, HFP.Version Bluetooth : 5.3.Bande de fréquence : 2.4 - 2.4835 GHz.Casque.Oreillette : Supra-auriculaire.Fréquence du casque : 20 - 20000 Hz.Impédance : 32 Ω.Sensibilité du casque : 103 dB.Haut-parleur : 4 cm.Microphone.Type de microphone : Intégré.Sensibilité du microphone : -40 dB.Base de transmission et de...

Le support de casque en bois Dynavox est le lieu de rangement idéal pour vos écouteurs Onear ou Overear de qualité. Ce texte a été traduit par une machine....

Caractéristiques Coquille thermoplastique Excellent ajustement Doublure amovible et lavable Fermeture micrométrique facile à utiliser Ventilation La visière longue résistante aux rayures Bouclier solaire intégré Certifié CEE 22.06

Conquérez les pistes avec le casque de ski CAIRN Electron U, un best-seller alliant légèreté, sécurité et style intemporel. Conçu pour les skieurs all-mountain, son excellence essentielle garantit un confort sans encombrement. Vivez une sensation de légèreté quasi inexistante qui réduit la fatigue du cou, vous permettant de profiter plus longtemps de sensations de ski pures. Gérez votre microclimat sans effort grâce à la ventilation réglable, s´adaptant à toutes les conditions météorologiques. La molette de réglage à une main garantit un ajustement sûr et sans pression, complété par un rembourrage amovible et lavable doublé de polaire pour un confort et une hygiène ultimes. Profitez d´oreillettes fixes pour la chaleur et d´un clip de rétention pour masque pour plus de praticité. Certifié CE EN 1077 Classe B

E01 casque de Moto Bluetooth casque IP56 étanche sans fil casque avec Microphone HD fonction SOS casque de Moto casque

Please Note We are not allowed to ship this item outside the EU. Sporty road helmet Shoei NXR2 - Pureness refined The whole is always more than the sum of its parts. It is essentially the components of comfortable fit, highly efficient ventilation, proven aerodynamics, reliable safety and maximum wearing comfort that make up a high-quality sports helmet. But it is our decades of experience in the development of motorcycle helmets, our uncompromisingly high quality of workmanship and our inquiring eye on the demands of the motorcyclists of today and tomorrow that turn these features into a premium sports helmet: the compact and lightweight SHOEI NXR2, in the tradition of high-quality sports helmets from the XR series. Safety Shock absorbing helmet shell made of AIM Double D closure E.Q.R.S. safety system (Emergency Quick Release System) Homologated according to ECE 22-06 Its AIM (Advanced Integrated Matrix) outer shell, combined with a polystyrene core system composed of several elements of different absorption capacity, provides optimal impact protection. The CWR-F2 visor, newly developed for the SHOEI NXR2, with a two-dimensional shape, allows a distortion-free and very natural vision. Reinforcements at the upper and lower edge of the visor increase the torsional stiffness, a now centrally mounted locking mechanism prevents the unintentional opening of the visor. It can be changed and adjusted quickly and without tools thanks to a further developed mechanism of the previous model. The enlarged, anti-fog PINLOCK®EVO lens included with the helmet allows an unobstructed view in a large part of the usable field of vision, even in difficult weather conditions, thanks to the mounting points that are offset far to the rear. The chin strap with double-D closure is easily adjustable and holds the helmet securely in place. In an emergency, the cheek pads can be easily removed for gentle helmet removal thanks to the EQRS (Emergency Quick Release System). Wearing comfort Helmet outer shells in 5 sizes (XXS-S / M / L / XL-XXL / 3XL) 3D molded center pad Cheek pads in different thicknesses (31, 35, 39, 43 mm) optionally available All pads removable, washable Ear pads Prepared for intercom Weight approx. 1390 gr. +- 50 gr. 5 different outer shell sizes (XXS-S | M | L | XL-XXL | XXXL) make the NXR2 a compact, lightweight sports helmet with a wide range of sizes. Its light weight relieves the neck muscles and thus reduces the fatigue effect, whether in sporting use on the racetrack or on extended tours. The three-dimensionally contoured head pad, the pre-shaped cheek pads and the chin strap pad are completely removable and washable. Lightly roughened, but soft, quick-drying cover materials reduce friction of the pads on the skin and ensure a comfortable feel. The redesigned cheek pads allow the helmet to be put on and taken off more easily. With their more voluminous underside, they reduce the wearer s exposure to noise. Head and cheek pads are available in different thicknesses to customize the helmet. Removable pads in the ear area effectively contribute to noise reduction. Cutouts in the ear area allow a communication system to be fitted. Ventilation Multiple ventilation and exhaust 6 inlets on forehead & chin 4 outlets at the back of the head & neck The 6 ventilation inlets and 4 exhaust outlets of the SHOEI NXR2 are connected via a branched ventilation system inside the helmet shell and noticeably reduce the interior temperature and humidity inside the helmet. They always ensure a sufficient supply of fresh air for the rider without increasing the noise level. The result is a pleasant helmet interior climate for a concentrated and fatigue-free ride, both for sporty riding on the race track and for motorcycle trips to warm countries. The closure sliders of the ventilation inlets are easy to feel even with gloves. Aerodynamics Integrated spoilers Developed in Shoei s wind tunnel Reduction of lift by 6%, minimization of drag by 4% (compared to NXR) The integrated spoiler in the back of the head stabilizes the helmet at higher speeds. The compact and aerodynamically optimized design of the SHOEI NXR2 further reduces its wind resistance and buoyancy tendency compared to the already low values of the previous model. This effectively relieves the rider s neck muscles and reduces the fatigue effect even on longer rides. Vortex generators on the edges of the visor and a newly developed visor seal minimize noise generation in the visor area. Accessories Visors in a variety of different tints and mirror coatings are available for the SHOEI NXR2, which can be used in compliance with ECE homologation guidelines. The helmet is equipped with a clear visor of type CWR-F2 as standard. All visors of this type can be fitted with anti-fog PINLOCK®EVO lenses, one of which is included with the helmet. In SHOEI s range of accessories, cheek pads and head pads are available in different sizes and thicknesses to replace the original pads or to customize the helmet. Also a chin strap pad, a breath deflector and a chin wind deflector. Scope of delivery Included with the SHOEI NXR2 is a PINLOCK®EVO lens for use with the standard CWR-F2 visor and matching replacement pins. Also included are a breath deflector, chin wind deflector, SHOEI logo stickers, an original SHOEI helmet pouch for gentle storage of the helmet, and silicone oil to care for the visor seal and mechanics. The helmet manual and the brochure "How to use your helmet properly" provide valuable information on the use, maintenance and care of the SHOEI NXR2. AIM outer shell (Advanced Integrated Matrix) The Shoei helmet shell is a three-dimensional structure made of several layers of glass fibers and organic fibers - the so-called Advanced Integrated Matrix. The organic fibers reinforce the glass fibers and optimize weight. The structure is bonded by an unsaturated, thermosetting polyester resin. This resin acquires its desired properties during heat curing: high elasticity and resistance. This technology allows a helmet shell characterized by high strength with low weight. The AIM helmet shell is designed to distribute the forces acting during an impact over the helmet shell. The outer shell and inner core may show damage, but the rider s head is afforded the greatest possible protection. Heavy, hard outer shells do not have this property and transfer the energy of an impact to the inside of the helmet without reduction. The outer shell may be undamaged, but the rider suffers head injuries. This is especially true of helmets designed to resist penetration by sharp objects. Two factors determine the perceived weight of a helmet: the real weight of the helmet and the dynamic weight caused by wind pressure and acceleration. In the event of an impact, the real weight is decisive for the acceleration forces acting on the neck. The heaviest part of a helmet is the helmet shell. Because the helmet shell is also the part that is subjected to the most stress during a fall, the requirements for a lightweight helmet shell are complex. Shoei s vast experience in processing fiber composites has enabled it to develop the extremely strong yet lightweight AIM and AIM+ helmet shells. Polystyrene core with different densities Every Shoei helmet sold in Europe has an inner shell adapted to the European head shape. The combination of several styrofoam elements in different densities provides effective impact absorption. The upper part of the inner shell is softer than the outer part. The relatively hard outer part of the inner shell increases the absorption capacity in the event of an impact. This technology was developed and patented by Shoei. Styrofoam has very good shock absorption properties. However, there is one drawback: if the Styrofoam core is compressed by an impact, it will expand back to its original size after a considerable amount of time. It looks intact, but by no means achieves the same shock absorption properties as before. This is also the reason why Shoei does not test helmets after an accident. It is impossible to judge whether the helmet is still safe. Wearing comfort and fit The shape and material of the pads play an important role in the comfort and fit of the helmet. The material that touches the rider s skin is critical to comfort. The fit of the helmet affects how well the helmet holds the rider, especially at high speeds. In the past, these requirements often played against each other. Thick, soft pads provided good comfort, but the helmet did not have a good grip at high speeds. Shoei has taken its own approach to designing the padding. The helmet s styrofoam core is molded close around the rider s head. This allows thinner pads to be used. These are produced in a complex process from several layers of polyurethane foam in different hardnesses or by a three-dimensional cut from a block. The result offers high comfort and a perfect fit, even at high speeds. The closure system Currently, Shoei offers two different closure systems for the chin strap, depending on the helmet model. The double-D system is mainly used in Shoei s "sporty" helmets. This system is mandatory for racing helmets. It offers the greatest reserves in the event of a fall. Shoei s more comfort-oriented helmet models are equipped with a Microrat system. Unlike most other systems, the Shoei micro-ratchet system has a stainless steel locking mechanism. This ensures maximum safety in addition to comfort. The Shoei Visor System All Shoei visors are injection molded from polycarbonate. This guarantees a clear and distortion-free view. The visor protects against small foreign bodies and absorbs 99% of of UV rays. The non-mirrored visors have a scratch-resistant coating. All current visors are equipped with Shoei s Q.R.B.P. system, which allows easy change without tools. Test ratings "MO-Tipp" - MO Motorrad-Magazin 02/2022 "5-Sterne" - Motorrad 25/2021 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.

Avec ce casque aéro, chaque détail a un objectif majeur : la performance haut de gamme. Découvrez le GameChanger 2.0 - fabriqué en Italie et développé avec des athlètes professionnels.Assurez-vous d´avoir l´avantage décisif dans la bataille pour chaque watt : faites passer votre expérience de course à un niveau supérieur avec le GameChanger 2.0.Parce que chaque seconde compte, une résistance à l´air moindre est indispensable. C´est là que l´arrière plus large entre en jeu, en plus de la forme aérodynamique. L´AeroBlade optimise la circulation de l´air grâce à une structure en grille spéciale et s´adapte aux différentes vitesses, angles latéraux et inclinaisons du casque. Le GameChanger 2.0 a donc une solution pour chaque situation de course.Même lors des sorties les plus chaudes, vous pouvez garder la tête froide grâce à l´entrée d´air AirBoost et au système de ventilation sophistiqué.Mais pour que le confort ne soit pas en reste, vous pouvez adapter facilement l´ajustement du casque grâce à notre système de réglage breveté. L´ActiCage augmente la stabilité du casque de route.Allez plus vite avec le GameChanger 2.0 : testé par des athlètes professionnels en soufflerie et sur la route. Il est temps de se mettre en route !Caractéristiques :- AeroBlade : la structure en grille spéciale optimise l´aérodynamisme indépendamment de la vitesse, de l´angle latéral et de l´inclinaison du casque- Système de ventilation sophistiqué : avec entrée d´air AirBoost et technologie de refroidissement à air forcé pour un climat optimal de la tête- Conception multi-coques In-Mold : pour une absorption sûre des chocs- ActiCage : renfort structurel intégré à l´EPS pour optimiser la stabilité- Demi-anneau : demi-anneau en plastique relié au système de réglage- Zoom Pro : système de réglage précis avec molette de réglage facile à saisir qui permet également de régler la hauteur pour un ajustement parfait et confortable- Port pour lunettes : support de lunettes aérodynamique avec guide de branches également à l´arrière du casque- Compatibilité avec les queues de cheval : casque très adapté aux cyclistes ayant une queue de chevalFonctionnement et utilisation :- Casque aéro haut de gamme pour les cyclistes professionnels et ambitieuxSpécifications :- Type de casque : Casque de course- Finition : brillante- Poids : 275 g

UN LOOK ÉLÉGANT Espace élégant pour vos écouteurs préférés. Que vous visitiez une conférence vidéo au bureau, écoutez votre musique préférée ou jouez à un jeu, les écouteurs sont souvent...

Please Note We are not allowed to ship this item outside the EU. Sporty road helmet Shoei NXR2 - Pureness refined The whole is always more than the sum of its parts. It is essentially the components of comfortable fit, highly efficient ventilation, proven aerodynamics, reliable safety and maximum wearing comfort that make up a high-quality sports helmet. But it is our decades of experience in the development of motorcycle helmets, our uncompromisingly high quality of workmanship and our inquiring eye on the demands of the motorcyclists of today and tomorrow that turn these features into a premium sports helmet: the compact and lightweight SHOEI NXR2, in the tradition of high-quality sports helmets from the XR series. Safety Shock absorbing helmet shell made of AIM Double D closure E.Q.R.S. safety system (Emergency Quick Release System) Homologated according to ECE 22-06 Its AIM (Advanced Integrated Matrix) outer shell, combined with a polystyrene core system composed of several elements of different absorption capacity, provides optimal impact protection. The CWR-F2 visor, newly developed for the SHOEI NXR2, with a two-dimensional shape, allows a distortion-free and very natural vision. Reinforcements at the upper and lower edge of the visor increase the torsional stiffness, a now centrally mounted locking mechanism prevents the unintentional opening of the visor. It can be changed and adjusted quickly and without tools thanks to a further developed mechanism of the previous model. The enlarged, anti-fog PINLOCK®EVO lens included with the helmet allows an unobstructed view in a large part of the usable field of vision, even in difficult weather conditions, thanks to the mounting points that are offset far to the rear. The chin strap with double-D closure is easily adjustable and holds the helmet securely in place. In an emergency, the cheek pads can be easily removed for gentle helmet removal thanks to the EQRS (Emergency Quick Release System). Wearing comfort Helmet outer shells in 5 sizes (XXS-S / M / L / XL-XXL / 3XL) 3D molded center pad Cheek pads in different thicknesses (31, 35, 39, 43 mm) optionally available All pads removable, washable Ear pads Prepared for intercom Weight approx. 1390 gr. +- 50 gr. 5 different outer shell sizes (XXS-S | M | L | XL-XXL | XXXL) make the NXR2 a compact, lightweight sports helmet with a wide range of sizes. Its light weight relieves the neck muscles and thus reduces the fatigue effect, whether in sporting use on the racetrack or on extended tours. The three-dimensionally contoured head pad, the pre-shaped cheek pads and the chin strap pad are completely removable and washable. Lightly roughened, but soft, quick-drying cover materials reduce friction of the pads on the skin and ensure a comfortable feel. The redesigned cheek pads allow the helmet to be put on and taken off more easily. With their more voluminous underside, they reduce the wearer s exposure to noise. Head and cheek pads are available in different thicknesses to customize the helmet. Removable pads in the ear area effectively contribute to noise reduction. Cutouts in the ear area allow a communication system to be fitted. Ventilation Multiple ventilation and exhaust 6 inlets on forehead & chin 4 outlets at the back of the head & neck The 6 ventilation inlets and 4 exhaust outlets of the SHOEI NXR2 are connected via a branched ventilation system inside the helmet shell and noticeably reduce the interior temperature and humidity inside the helmet. They always ensure a sufficient supply of fresh air for the rider without increasing the noise level. The result is a pleasant helmet interior climate for a concentrated and fatigue-free ride, both for sporty riding on the race track and for motorcycle trips to warm countries. The closure sliders of the ventilation inlets are easy to feel even with gloves. Aerodynamics Integrated spoilers Developed in Shoei s wind tunnel Reduction of lift by 6%, minimization of drag by 4% (compared to NXR) The integrated spoiler in the back of the head stabilizes the helmet at higher speeds. The compact and aerodynamically optimized design of the SHOEI NXR2 further reduces its wind resistance and buoyancy tendency compared to the already low values of the previous model. This effectively relieves the rider s neck muscles and reduces the fatigue effect even on longer rides. Vortex generators on the edges of the visor and a newly developed visor seal minimize noise generation in the visor area. Accessories Visors in a variety of different tints and mirror coatings are available for the SHOEI NXR2, which can be used in compliance with ECE homologation guidelines. The helmet is equipped with a clear visor of type CWR-F2 as standard. All visors of this type can be fitted with anti-fog PINLOCK®EVO lenses, one of which is included with the helmet. In SHOEI s range of accessories, cheek pads and head pads are available in different sizes and thicknesses to replace the original pads or to customize the helmet. Also a chin strap pad, a breath deflector and a chin wind deflector. Scope of delivery Included with the SHOEI NXR2 is a PINLOCK®EVO lens for use with the standard CWR-F2 visor and matching replacement pins. Also included are a breath deflector, chin wind deflector, SHOEI logo stickers, an original SHOEI helmet pouch for gentle storage of the helmet, and silicone oil to care for the visor seal and mechanics. The helmet manual and the brochure "How to use your helmet properly" provide valuable information on the use, maintenance and care of the SHOEI NXR2. AIM outer shell (Advanced Integrated Matrix) The Shoei helmet shell is a three-dimensional structure made of several layers of glass fibers and organic fibers - the so-called Advanced Integrated Matrix. The organic fibers reinforce the glass fibers and optimize weight. The structure is bonded by an unsaturated, thermosetting polyester resin. This resin acquires its desired properties during heat curing: high elasticity and resistance. This technology allows a helmet shell characterized by high strength with low weight. The AIM helmet shell is designed to distribute the forces acting during an impact over the helmet shell. The outer shell and inner core may show damage, but the rider s head is afforded the greatest possible protection. Heavy, hard outer shells do not have this property and transfer the energy of an impact to the inside of the helmet without reduction. The outer shell may be undamaged, but the rider suffers head injuries. This is especially true of helmets designed to resist penetration by sharp objects. Two factors determine the perceived weight of a helmet: the real weight of the helmet and the dynamic weight caused by wind pressure and acceleration. In the event of an impact, the real weight is decisive for the acceleration forces acting on the neck. The heaviest part of a helmet is the helmet shell. Because the helmet shell is also the part that is subjected to the most stress during a fall, the requirements for a lightweight helmet shell are complex. Shoei s vast experience in processing fiber composites has enabled it to develop the extremely strong yet lightweight AIM and AIM+ helmet shells. Polystyrene core with different densities Every Shoei helmet sold in Europe has an inner shell adapted to the European head shape. The combination of several styrofoam elements in different densities provides effective impact absorption. The upper part of the inner shell is softer than the outer part. The relatively hard outer part of the inner shell increases the absorption capacity in the event of an impact. This technology was developed and patented by Shoei. Styrofoam has very good shock absorption properties. However, there is one drawback: if the Styrofoam core is compressed by an impact, it will expand back to its original size after a considerable amount of time. It looks intact, but by no means achieves the same shock absorption properties as before. This is also the reason why Shoei does not test helmets after an accident. It is impossible to judge whether the helmet is still safe. Wearing comfort and fit The shape and material of the pads play an important role in the comfort and fit of the helmet. The material that touches the rider s skin is critical to comfort. The fit of the helmet affects how well the helmet holds the rider, especially at high speeds. In the past, these requirements often played against each other. Thick, soft pads provided good comfort, but the helmet did not have a good grip at high speeds. Shoei has taken its own approach to designing the padding. The helmet s styrofoam core is molded close around the rider s head. This allows thinner pads to be used. These are produced in a complex process from several layers of polyurethane foam in different hardnesses or by a three-dimensional cut from a block. The result offers high comfort and a perfect fit, even at high speeds. The closure system Currently, Shoei offers two different closure systems for the chin strap, depending on the helmet model. The double-D system is mainly used in Shoei s "sporty" helmets. This system is mandatory for racing helmets. It offers the greatest reserves in the event of a fall. Shoei s more comfort-oriented helmet models are equipped with a Microrat system. Unlike most other systems, the Shoei micro-ratchet system has a stainless steel locking mechanism. This ensures maximum safety in addition to comfort. The Shoei Visor System All Shoei visors are injection molded from polycarbonate. This guarantees a clear and distortion-free view. The visor protects against small foreign bodies and absorbs 99% of of UV rays. The non-mirrored visors have a scratch-resistant coating. All current visors are equipped with Shoei s Q.R.B.P. system, which allows easy change without tools. Test ratings "MO-Tipp" - MO Motorrad-Magazin 02/2022 "5-Sterne" - Motorrad 25/2021 Note Please be aware, as long as nothing else is written in the item description: All helmets will be delivered only with the ECE certification by default, even if it is shown differently. all helmets that have a visor will be delivered with a clear visor, even if it is shown differently.

Le Mod1 Pro Matte Mist est un casque de ski/snowboard unisexe de la marque Oakley, doté du système de protection MIPS® et d'une construction robuste en ABS pour une sécurité optimale.Ce casque intègre le système unique SKULL MATRIX qui combine MIPS® et BOA®, offrant un ajustement précis et un confort supérieur grâce à une molette de réglage ergonomique. La coque moulée injectée en Dura-Matter associée à une doublure en mousse EPS assure une excellente absorption des chocs. La ventilation passive garantit une bonne gestion thermique sans complexité.Pratique, il dispose d'une coiffe et de coussinets amovibles et lavables pour un entretien facile, ainsi que d'une boucle arrière pour maintenir la sangle du masque. Le système de fermeture magnétique FIDLOCK® facilite l'enfilage même avec des gants. Certifié ASTM F2040 et CE EN1077, le Mod1 Pro Matte Mist est le choix idéal pour les passionnés de glisse recherchant performance, protection et confort tout au long de la journée.