238 products were found matching your search for arctic in 3 shops:

Enables consistently high write and read speedsThe M2 Pro is available in black and silver. Its additional mass effectively helps cool the chips, enabling faster cooling and reliable performance of M.2 SSDs. Its slim design makes it compatible with the PlayStation 5 and provides optimal cooling for retrofitted SSD hard disks. Thanks to the intelligent click method, it can be assembled without screws or rubber bands.Efficient heat dissipationThanks to its additional mass, the ARCTIC M2 Pro effectively dissipates heat from the chips and passes it on to the environment. This results in a cooler SSD and faster cooling.Measurements taken at 25°C air temperature inside the PC enclosure. Without a heat sink, thermal throttling can be expected at higher temperatures.

Armani Prisma Glass Icy Plumper, 3.5 ml, Lip Glosses for Women, Has nature not given you the full lips you would like? You don't have to immediately undergo invasive cosmetic procedures. The Armani Prisma Glass Icy Plumper lip volume gloss provides painless lip augmentation in the comfort of your own home. It helps you achieve this result thanks to a shiny finish for an optically fuller look and ingredients that cause increased blood circulation to the lips. This will cause a slight tingling, redness, and above all an increase in lip volume. After a while, the tingling sensation will subside and you will have fuller lips for a couple of hours. And what's the great bonus about using this lip plumping treatment? You can always easily recreate its magic. Just keep it with you in your pocket or handbag and reapply as needed. Characteristics: gives lips more volume adds subtle colour to lips ensures a high gloss How to use: Apply an even layer to the lips with an applicator.

With our gel polish (= UV polish) you can look forward to up to 5 weeks of perfect nails. No chipping, no scratching and no annoying marks on freshly painted nails! It is easy to apply like nail polish and hardens in a flash in just 60 seconds under UV/LED light. Our Arctic Midnight gel polish in very dark blue is like the quiet and mysterious night in the Arctic, deep and impressive. This gel polish is HEMA-free, i.e. it contains neither HEMA nor di-HEMA and is suitable for allergy sufferers or people who are allergic to these acrylate ingredients. Consistency: creamyCoverage: very high coverage 5 reasons why you will love our gel polish: Up to 5 weeks of flawless nailsNo chipping or scratchingEasy application & removalLightning-fast curing - only 60 secondsProven studio quality 5 weeks of beautiful nails - no chipping - no scratches. Curing under UV or LED light means you are ready 2 go in a flash with gel polish. Finally, no more annoying marks on freshly painted nails! At the same time, you can enjoy nails that not only look beautiful, but also remain scratch-resistant and chip-free - for up to 5 weeks. Easy application - As easy as normal nail polish - only better! With gel polish, you experience an application that is as simple as with normal nail polish, but with the durability of a UV gel. It is easy to apply with the high-quality brush, which is used directly from the brush bottle. The smooth texture glides on automatically and ensures streak-free results. So you can easily achieve beautiful nails that look like they've come straight from the nail salon. Huge UV polish range - perfect selection for every nail and every look. We have a huge selection of gel polish colors. But did you know that the right base coat is also crucial? That's why we have the ideal base coat for every natural nail and every need. Be it the versatile combination product Base & Finish, the extra stable Power Base or the adhesion wonder Rubber Base. Our top coats round off your manicure perfectly: you can choose between glossy, matt or special effects. Unsurpassed studio quality - reliable quality for almost 25 years. Our heart beats for gel polish! That's why our dedicated team puts a lot of love and dedication into every single shade in our huge range of colors. Tested under strict conditions, we ensure that every color meets our high quality standards. With almost 25 years of experience in the nail industry, we know exactly what is important. This enables us to offer you studio-quality gel polishes that are so easy to apply that every DIY nail queen can create beautiful nails at home. FAQ: Any questions? Our product expert has the answers! What is the difference between gel polish, UV polish, UV nail polish and Shellac? There is often confusion when it comes to the difference between all these product names. However, all these products belong to the same product category. This is a nail polish that only hardens under LED/UV light, i.e. it is not air-drying. In...

Efficient performance with high air resistanceThanks to high static pressures, the Pro fans effectively move air through tight spaces. This makes them ideal for radiators, perforated panels and mesh filters. Maximum performance redefinedRevised fan blade design for an optimal balance of performance and smoothness. Optimised bearing-shaft design (FDB)A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimising vibrations. Better balance - less vibrationAn automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy.SOTA microcontrollerReduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity. More power - less noiseThe fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling.

Powerful and energy efficientThe P9 PWM PST is a powerful 92-mm fan with a speed of 200 to 3000 rpm. It delivers a static pressure of 3.12 mmH2O and generates an airflow of 38.83 cfm. Thanks to pulse width modulation (PWM), it enables precise fan speed control and is extremely energy-efficient, boasting consumption of just 0.12 A. It also has a 0 dB mode for silent operation when idling.Optimised for high static pressureThe P9 PWM PST delivers a focused stream of air and ensures a high airflow even with particularly high air resistance. This makes the fan ideal for use on heatsinks, radiators, perforated panels and filters.0 dB mode - zero rpmThe fan can be throttled to a standstill using PWM, allowing silent operation at idle while ensuring maximum performance when needed. As a result, the P9 PWM PST offers highly flexible speed adjustment to optimally regulate the airflow in each enclosure.

ULTIMATE Performance thermal compound with 6x MX cleaner20% better performanceWith its improved setup, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4. The calculation is based on the temperature difference between the cooling base and the heat source (in °C) in relation to the applied heat load (in W), which also results in the unit °C/W. The higher the thermal resistance, the worse the compound is at transferring heat through the TIM layer. As an example, thermal insulators therefore always have a particularly high thermal resistance, while thermal interface materials usually have a particularly low resistance.Proven qualityWe are proud of our thermal compounds. After over 20 years of experience in the PC cooling market and with the goal of offering a first-class product at a fair price, the MX-6 thermal compound was developed. The optimised formula is based on the tried-and-tested MX-4 thermal compound, one of the best-selling thermal compounds in the world. The focus was on a wide variety of applications and easy-to-use consistency.Viscosity: 45000 poiseDensity: 2.6 g/cm³Operating temperature: -50 - 150°CResistance: 1.8 x 1012 O-cmBreakdown voltage: 7.5 kV/mmColour: grey

New standards of energy efficiencyThe S8038 server fan consumes 25% less than its closest competitor while offering the same performance, thus improving your server's energy efficiency. Reducing power consumption is the result of months of motor optimisation by ARCTIC engineers to increase the efficiency of IT equipment. Wide speed range (500 to 10000 rpm)The S8038-10K offers a wide speed range that can be controlled via both PWM and voltage. This allows the fan to be optimally adapted to the specific requirements of the system. With a speed range of 500 to 10000 rpm, it offers the perfect balance between cooling performance and noise generation despite varying requirements. The standard 4-pin connector also allows the S8038-10K to be connected to 2-pin or 3-pin headers, enabling it to be controlled by voltage rather than PWM. The 30-cm cable offers a high degree of flexibility for placing the fan.

The Arctic Liquid Freezer III Pro 280 A-RGB is highly compatible and supports both Intel LGA1851/LGA1700 and AMD AM5/AM4 sockets. The A-RGB lights can also be individually adapted to meet any requirement.Integrated VRM fanPWM-controlled fan that lowers the temperature of the voltage regulator to ensure stable performance.Offset mounting for Intel and AMDShifts the cold plate to the CPU hotspot for more efficient heat transfer.Intel contact frameOptimised contact pressure distribution for longer CPU service life and improved heat dissipation.The new P14 Pro fans, increased performance at any speedThe P14 Pro unleashes its full potential: quieter and more powerful at low speeds, with greater power reserves under load - for maximum cooling performance without compromise.Premium radiatorThe 38-mm radiator not only provides enhanced heat dissipation, but also holds more liquid than conventional 27-mm radiators. This reduces heat buildup and ensures more efficient handling of temperature spikes.

Reverse airflowThe P12 Pro Reverse is specifically designed for air intake from the rear. It is particularly suitable for when conventional fans would affect the optics.Optimised airflow designThe funnel-shaped air inlet and drop-shaped struts guide the air flow with reduced loss.This reduces air resistance and minimises turbulence and aerodynamic noise.SOTA microcontrollerReduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.

Reverse airflowThe P12 Pro Reverse is specifically designed for air intake from the rear. It is particularly suitable for when conventional fans would affect the optics.Optimised airflow designThe funnel-shaped air inlet and drop-shaped struts guide the air flow with reduced loss.This reduces air resistance and minimises turbulence and aerodynamic noise.SOTA microcontrollerReduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.

Optimised for high static pressureWhen the new P8 PWM PST was developed, special emphasis was placed on a focused airflow and high static pressure. The fan therefore guarantees extremely efficient cooling, even with increased air resistance. This makes the P8 PWM PST particularly suitable for use on heatsinks, radiators, perforated panels and filters.More efficient technologyThe motor is powered by the latest-generation PWM-IC, which allows the new P8 PWM PST to work much more efficiently than its predecessors. This saves energy without compromising performance.Maximum smoothness, minimum vibrationThe operating noise of the newly developed ARCTIC motor is barely noticeable, even at the lowest speed. Due to sinus-magnetising, the P-fan motor only creates 5% of the vibration from the commutation of a regular DC motor without a filter. Thanks to the uniform distribution of force, there's therefore no need for a rubber buffer.Improved service lifeA 10°C lower motor temperature roughly doubles the service life.

Reverse airflowThe P14 Pro Reverse is specifically designed for air intake from the rear. It is particularly suitable for when conventional fans would affect the optics.Optimised airflow designThe funnel-shaped air inlet and drop-shaped struts guide the air flow with reduced loss.This reduces air resistance and minimises turbulence and aerodynamic noise.SOTA microcontrollerReduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.

Ideal for small spacesIn contrast to normal 140-mm case fans that are 27 mm thick, the P14 Slim PWM PST has a mounting depth of only 16 mm. This makes it the ideal choice for Small Form Factor (SFF) builds. Corresponding screws for mounting on a radiator are included.Optimised for high static pressureThe fan design of the P14 Slim PWM PST is optimised for focused airflow, thus generating high static pressure. The fan enables extremely efficient cooling and a good airflow, even with increased air resistance. This makes the P14 Slim PWM PST particularly well suited to use on concealed case intakes, dust filters, radiators, and generally in small enclosures that have little space for free airflow due to compactly placed hardware.

High performance - very softBased on silicone and a special filler, the TP-3 outperforms high-performance pads, especially in the case of height differences of closely spaced chips that typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite its extremely low hardness. Minimisation of thermal resistanceThe thinner the pad, the lower the thermal resistance. The TP-3 pad with a thickness of 0.5 mm can easily be compressed to 0.3 mm, thus compensating for height differences between various components of up to 0.2 mm. Please note that due to the extremely low hardness, the installation of the 0.5-mm pad requires extra care. Please refer to the user manual.

Reverse airflowThe P12 Pro Reverse is specifically designed for air intake from the rear. It is particularly suitable for when conventional fans would affect the optics.Optimised airflow designThe funnel-shaped air inlet and drop-shaped struts guide the air flow with reduced loss.This reduces air resistance and minimises turbulence and aerodynamic noise.SOTA microcontrollerReduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity.

Future-proof compatibilityAMD is expected to release the AM5 socket, the successor to its popular AM4 platform, at the end of 2022. Since all mechanical dimensions will remain the same, we guarantee that our ARCTIC coolers will also be compatible with AMD's new processors.Improved cooling performance thanks to new manufacturing processThe high thermal conductivity of the aluminium is fully retained with a new type of extrusion. This innovative production process makes it possible to produce a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.Designed for continuous operationThe premium quality of the Japanese double ball bearing allows continuous operation 24/7 without compromising on performance. Dirt and high temperatures affect this bearing much less than generic sleeve or single ball bearings. That is why the double ball bearing is the perfect choice if you want to guarantee continuous operation.

Performance-optimised consistencyMX-7 is a comparatively viscous thermal compound, which cannot be applied with a spatula, but is distributed evenly and without air pockets by the contact pressure of the radiator.Long durabilityIts high cohesion ensures a stable composition and ensures long-lasting, constant performance without drying out. Even distributionThe low adhesion enables optimal distribution and maximum heat transfer.No pump-out effectHigh cohesion prevents cracks or leakage even during repeated heat cycles with a high thermal load.Easy to apply crosswaysApply MX-7 with ease in a cross pattern. The contact pressure of the radiator distributes the paste evenly over the entire surface, ensuring complete coverage and easy handling.

The all-black Freezer 36 has been designed for efficient cooling of modern multi-core processors and is equipped with two fans in a push-pull configuration. This all-black variant is particularly suitable for PC builds in a uniform or high-contrast design.High-quality finish with aluminium top plateWith its push-pull configuration, the Freezer 36 not only boasts efficient cooling performance, but also an impressive design. The soldered ends of the heat pipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.Freezer 36 - tested and confirmed by IntelIntel has tested and confirmed the Freezer 36 on the i9-13900K/KF, i9-14900K/KF and i9-13900KS in the Enthusiast and Desktop category. In these tests, Intel looked at both the mounting with contact frame and the performance of the cooler.Versatile compatibilityThe Freezer 36 is multi-compatible with Intel and AMD sockets.

Efficient performance with high air resistanceThanks to high static pressures, the Pro fans effectively move air through tight spaces. This makes them ideal for radiators, perforated panels and mesh filters.Maximum performance redefinedRevised fan blade design for an optimal balance of performance and smoothness. Optimised bearing-shaft design (FDB)A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimising vibrations. Automated two-plane balancingAn automated two-plane measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing mass with pinpoint accuracy at two different depth levels.

120-mm A-RGB PWM fan with cable splitter Efficient performance with high air resistanceThanks to high static pressures, the Pro fans effectively move air through tight spaces. This makes them ideal for radiators, perforated panels and mesh filters.Maximum performance redefinedRevised fan blade design for an optimal balance of performance and smoothness. Optimised bearing-shaft design (FDB)A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimising vibrations.