56 products were found matching your search for brushing in 3 shops:

Elastic hold for all blow dry hairstyles.

Elastic hold for all blow dry hairstyles.

The ideal styling aid for all blow-dry hairstyles. The hair gets a natural swinging hold and loose volume. Special care substances protect the hair and give it a silky shine.

The ideal styling aid for all blow-dry hairstyles. The hair gets a natural swinging hold and loose volume. Special care substances protect the hair and give it a silky shine.

The classic brush for medium to long hair. The large work surface allows you to quickly blow dry large sections smooth and sleek. Heat-resistant nubs ensure easy brushing and silky shine. optimal for long, thick and strong hairantistatic effect due to smooth surface of the bristlesperfect for blow-drying smooth or detanglingapprox. 26 cm long and 9 cm wide

Curved skeleton brush ideal for detangling, styling, brushing and for a head massage. In two sizes, with or without boar bristles. curvy design based on the shape of the headvery lightin two sizesavailable with and without boar bristlesideal brush for detangling, styling, brushing and scalp massagegentle to hair and scalp

Made of one piece, the seamless design of the Essential Care Flex from Olivia Garden provides maximum comfort during brushing. Double-stage Memory Flex bristles gently detangle hair. Flexible brush head distributes pressure evenly during brushing. Dual curved brush body simultaneously stimulates the scalp while combing. Detangling brushes for wet and dry hairFlexible brush bodyErgonomic, seamless brush handle White for fine hairGrey for normal hairBlack for strong hair

Aggressive brush. Ideal for heavy-duty brushing tasks such as deburring, cleaning, rust removal, descaling and removing weld spatter. To meet the special requirements when machining stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience gained from the industrial environment confirms that it offers very good corrosion resistance with an optimal service life. All PFERD TOOLS brushes with INOX filament are marked blue and suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic during cold hardening, meaning it is attracted to magnets.This is caused by a structural change caused by deformation, e.g. during wire drawing. This does not affect the quality and corrosion resistance of the INOX filament. It retains its corrosion-resistant properties. Stainless steel wire (INOX) withstands temperatures up to 450°C.

Ideal for medium-duty brushing tasks such as deburring, cleaning and rust removal. To meet the special requirements when machining stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience gained from the industrial environment confirms that it offers very good corrosion resistance with an optimal service life. All PFERD TOOLS brushes with INOX filament are marked blue and suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic during cold hardening, meaning it is attracted to magnets.

Universally applicable for cleaning, rust removal and smoothing, as well as removal of corrosion and varnishes. Due to face-down use with the entire brush surface, it is suitable for brushing tasks on large, flat and easily accessible surfaces. Specially designed for use within low speed ranges on cordless screwdrivers and power drills. Brushes with plastic filaments are particularly suitable for deburring and surface improvement. Plastic filaments withstand temperatures up to 220°C.Technical data:Packaging: POS packagingMax. RPM: 4500 RPMMounting system: shankFilament material dia.: 1.27 mmOutside dia. metric: 50 mmShank dia. metric: 6 mmFilament material: plastic filament, coarse (RED)Grain size: 80Filament length: 20 mm

For precision drilling, milling, sanding, polishing, brushing, derusting, engraving, chiselling and cutting.With drill chuck (clamping range 0.3 - 3.2 mm). Precision ball-bearing spindle made of ground steel that can be locked at the push of a button for tool changes. Recessed spindle head for inserting MICROMOT steel collets. Special balanced, powerful, quiet and long-lasting DC motor. Infinitely variable speed regulator with feedback effect (high tightening torque in the lower speed range). Housing made of glass-fibre-reinforced POLYAMIDE. We recommend the use of MICROMOT mains adapters with at least 2.0 A for operation.Technical data:DC voltage: 12 - 18 V. 100 W. 3,000 - 15,000 rpm. Length 185 mm. Weight: 450 g.

Drilling and milling unit Micromot 60 for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing.Voltage supply: 12 VIdle speed: 20,000 rpmExtremely easy to manage with a diameter of only 35 mm. As well as a low weight (approx. 230 g), this product features a pleasant singing sound and free running due to the balanced motor with a ground, ball bearing spindle. Thanks to high-quality MICROMOT steel collets, even the smallest shafts are tensioned completely concentrically. Application tools do not rattle and knock around. Like all machines of this size, they are powered by a low-voltage safety voltage. A power supply unit with a minimum output of 1.0 A is required for operation. We recommend MICROMOT power supply units

Universally applicable for cleaning, rust removal and smoothing, as well as removal of corrosion and varnishes. Due to face-down use with the entire brush surface, it is suitable for brushing tasks on large, flat and easily accessible surfaces. Specially designed for use within low speed ranges on cordless screwdrivers and power drills. Brushes with brass wire are suitable for special applications such as finishing the surfaces of workpieces made of copper and brass. Brass wire is softer and more flexible than steel wire. PFERD TOOLS uses the wire quality CuZn37 for all brushes with brass wire. Brass wire withstands temperatures up to 180°C.Technical data:Packaging: POS packagingMax. RPM: 4500 RPMMounting system: shankFilament material dia.: 0.2 mmOutside dia. metric: 50 mmShank dia. metric: 6 mmFilament material: brass wire (MES)Filament length: 20 mm

Suitable for medium-duty brushing tasks such as rust removal, brushing of weld seams and light deburring work. To meet the special requirements when machining stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience gained from the industrial environment confirms that it offers very good corrosion resistance with an optimal service life. All PFERD TOOLS brushes with INOX filament are marked blue and suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic during cold hardening, meaning it is attracted to magnets.This is caused by a structural change caused by deformation, e.g. during wire drawing. This does not affect the quality and corrosion resistance of the INOX filament. It retains its corrosion-resistant properties. Stainless steel wire (INOX) withstands temperatures up to 450°C.

Universally applicable for cleaning, rust removal and smoothing, as well as removal of corrosion and varnishes. Due to face-down use with the entire brush surface, it is suitable for brushing tasks on large, flat and easily accessible surfaces. Specially designed for use within low speed ranges on cordless screwdrivers and power drills. To meet the special requirements when machining stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience gained from the industrial environment confirms that it offers very good corrosion resistance with an optimal service life. All PFERD TOOLS brushes with INOX filament are marked blue and suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic during cold hardening, meaning it is attracted to magnets.

Universally applicable for cleaning, rust removal and smoothing, as well as removal of corrosion and varnishes. Due to face-down use with the entire brush surface, it is suitable for brushing tasks on large, flat and easily accessible surfaces. Specially designed for use within low speed ranges on cordless screwdrivers and power drills. Brushes with plastic filaments are particularly suitable for deburring and surface improvement. Plastic filaments withstand temperatures up to 220°C.Technical data:Packaging: POS packagingMax. RPM: 4500 RPMMounting system: shankFilament material dia.: 1.1 mmOutside dia. metric: 50 mmShank dia. metric: 6 mmFilament material: plastic filament, fine (BLUE)Grain size: 180Filament length: 20 mm

Drilling and milling unit Micromot 60/E for drilling, milling, grinding, polishing, brushing, cleaning, derusting, sawing, cutting, engraving, chiselling and signing.Voltage supply: 12 V by Proxxon power supply unit 28704/28706Idle speed: adjustable from 5000 - 20,000 rpm with Proxxon power supply unit

Universally applicable for cleaning, rust removal and smoothing, as well as removal of corrosion and varnishes. Due to face-down use with the entire brush surface, it is particularly suitable for brushing tasks on large, flat and easily accessible surfaces. Cup brush with plastic-coated brush body. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Max. RPM: 10,500 RPMOpt. RPM from: 5300 RPMOpt. RPM to: 7900 RPMWidth metric: 10 mmMounting system: shankFilament material dia: 0.3 mmOutside metric dia: 50 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Grain size: not specifiedFilament length: 20 mmTotal length: 75 mm

Aggressive brush. Ideal for heavy-duty brushing tasks such as deburring, cleaning, rust removal, descaling and removing weld spatter. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Number of knots: 18 piecesPackaging: POS packagingPFERD TOOLS type: POS TBG 65/M14 ST 0.50Max. RPM: 12,500 RPMOpt. RPM from: 6300 RPMOpt. RPM to: 12,500 RPMMounting system: threadFilament material dia.: 0.5 mmOutside dia. metric: 65 mmThread dia.: M14x2Filament material: steel wire (ST)Grain size: not specifiedFilament length: 22 mmAdvantages:Aggressive brushing effect due to high rigidity of the wire knots.Long service life due to the use of PFERD TOOLS special wire.

Universally applicable for cleaning, rust removal and smoothing, as well as removal of corrosion and varnishes. Due to face-down use with the entire brush surface, it is particularly suitable for brushing tasks on large, flat and easily accessible surfaces. Cup brush with plastic-coated brush body. Silicon carbide (SiC) brushes are particularly suitable for deburring and surface improvement. Plastic trim withstands temperatures up to 220°C.Technical data:Max. RPM: 10,500 RPMOpt. RPM from: 4200 RPMOpt. RPM to: 6800 RPMWidth metric: 10 mmMounting system: shankFilament material dia.: 0.9 mmOutside metric dia.: 50 mmShank dia. metric: 6 mmFilament material: silicon carbide (SiC)Grain size: 180Filament length: 20 mmTotal length: 75 mmAdvantages:Optimal adaptation to the contour of the workpieces due to high flexibility.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as the tip.Recommendations for use:Observe the recommended speeds.Use coolant for high heat applications.For best performance, use a tool drive with at least 300 watts.