1804 products were found matching your search for clamp in 1 shops:

"THE test multitool for the electricianWhen working on electrical systems that cannot be switched off, for example, current measurements are a major challenge. With the current measuring clamp from Wiha, measurements can be made using the clamp fork without interrupting the circuit. Handling is made much easier by the contactless one-hand test. The test probes enable further tests: Voltage measurements in the AC and DC range as well as resistance, frequency and capacitance measurements. They also enable continuity tests and diode tests. This multifunctionality significantly increases efficiency. The measurement results can be read immediately and beyond the measurement process by means of a large LCD display with backlight and data hold function.An additional signal tone indicates the current flow during continuity testing. Furthermore, thanks to the integrated flashlight function, Wiha's current clamp offers optimum lighting conditions, even in poorly lit working environments. The LPF function, together with the True RMS function, increases the process reliability of your test by providing disturbance-free RMS values. According to the measurement category CAT IV up to 1,000 V, the current clamp offers maximum safety for work directly on sources of low-voltage installation.Product advantages:simplifies your work: large LCD display with backlight for easy-to-read measurement resultsincreases your safety: measurement of live wires without open contactsfacilitates handling: Simple one-hand test without interrupting the circuitincreases your efficiency: All tests relevant for electricians with only one measuring deviceSimplifies your work: An integrated flashlight function ensures optimum lighting conditionsincreases your process reliability: Accurate measurement results thanks to LPF and TRUE RMS measurementScope of delivery incl. 2x AAA batteries"

• Highest accuracy in its class: 0.2%• Resolution and sensitivity of 0.01 mA• Measurement of 4 to 20 mA signals without interrupting the loop• Measurement of the mA signals for analogue inputs/outputs to the PLC and control system• Dual backlit display showing the mA reading and the percentage of the 4 to 20-mA span• Measuring point lighting illuminates hard-to-see wires in dark cabinets• Removable jaws with extension cable for measurements in confined spaces• Measuring of 10 to 50 mA signals in older control systems using the 99.9 mA range• Automatic change of the 4 to 20 mA output for tests over greater distances• Power saving features, auto-off, time-controlled disconnection of the backlight extends the battery life• Hold function records and displays fluctuating readingsEnvironmental dataDiameter of measurable conductor: maximum 0.177 inch or 4.5 mmIP specification: IP 40Included with delivery2 AA batteriesCarrying bagUser manualFunctional descriptionsmA measurement (measured by clamp meter)Resolution and measuring range: 0 to 20.99 mAInaccuracy: 0.2% + 2 digitsResolution and measuring range: 21.0 to 100.0 mAInaccuracy: 1% + 5 digits

For torque screwdrivers with longitudinal handles Sleeve Made of stainless steel with black plastic sheathing.Application For controlled screwing at a predefined torque.Blade High quality chrome-vanadium-molybdenum steel, fully hardened, matt-chrome plated.

Theatre hookHook for installing projectors, lighting effects etc. via a truss systemFor truss systems with a tube diameter of 50 mmOnly for the installation at horizontal truss!Max. load WLL (4-fold): 15 kgMax. load BGV C1 (8-fold): 7.5 kgMax. load BGV C1 (10-fold): 6 kgMax. load BGV C1 (12-fold): 5 kgDimensions (LxWxH): 135 x 75 x 30 mmWeight: 0.5 kgColor: Black

"Especially when measuring temperatures at measuring points far away from each other, the testo 115i makes the application much easier - thanks to the wireless connection to the Smartphone or Tablet.When used together with the testo 549i pressure gauge, individual parameters of refrigeration systems can also be calculated.The measurement data is transmitted from the clamp thermometer to the testo Smart Probes App and can be read off conveniently on your smartphone or tablet - either as a diagram or in tabular form. Temperature changes are immediately visible. Finally, the measurement data protocol can be sent directly by e-mail as a PDF or Excel file. This saves you time and at the same time increases your efficiency.Product benefits:Compact professional measuring device from the Testo Smart Probes series for use with Smartphones/TabletsMeasurement of the flow and return temperature of heating systemsTemperature measurement in refrigeration plants for calculation of superheating and subcoolingQuick detection of temperature changes through graphic progress displayMeasurement data analysis and dispatch via testo Smart Probes AppTrouble-free use at measuring points far away from each other - Bluetooth® range up to 100 m"

"DCM1500S clamp meter for versatile applications, photovoltaic systems and wind turbinesDC voltage up to 2000 VAC voltage up to 1500 VAC and DC current up to 1500 ASmart HOLDMIN/MAXAutomatic range adjustmentBluetooth connection to the Megger Link appSafety to EN 61010-1/CAT IV 600 V/CAT III 1000 VTest leads for photovoltaic systemsThe DCM1500S clamp meter measures up to 2000 V DC and 1500 V AC (with PVHV test leads) and up to 1500 A AC or DC and is ideal for use in the installation, maintenance, monitoring and testing of photovoltaic systems as well as electrical devices that are supplied with AC or DC voltage.The meter is supplied with both standard 4-mm test leads and the new PVHV1 (4 mm) and PVHV2 (PV) HV-DC wiring harnesses. It features a large, clear backlit display and an automatic torch in the clamp meter to facilitate use in poorly lit areas."

"ULINE accessories, belt clamp pack of two blackThe pack of two clamps for the ULine system allows stylish loop installations. These clamps are specially designed to work seamlessly with the 48-V belt system and provide a reliable fastening solution. Thanks to their simple and functional design, they fit inconspicuously into any lighting installation. Custom lighting concepts can be implemented effortlessly and flexibly using the clamps. The ULine belt system is an innovative solution for unique lighting experiences in all room dimensions and enables targeted lighting on walls, ceilings and floors.ULine belt system accessories, includes assembly instructionsSurface/colour: blackMade from high-grade aluminium"

"Rotating, universal grip inserts for reliably gripping the clamps in all positions.jaw inserts can also be rotated under loadextremely good leverage which allows clamps to be opened easily without great effortslim head design - narrow head width, rotating grip inserts make this an ideal tool, especially in confined areasadditional function: detach hoses gently using the serrated jawchrome vanadium electric steel, forged, oil-hardenedcan be used for standard, space-saving and wire clamps, as well as for spring band clamps with a nominal size of up to 50 mmallows more than 30 mm clamping range"

"To open and close Click clamps. Rotating jaw inserts for the safe actuation of clamps in any position.Good leverage which allows clamps to be opened and closed again comfortably and easily without a great deal of effortfor easy working on fuel hoses, vacuum pipes and suction nozzles and many other applicationsadditional function: detach hoses gently using the serrated jawslim head design - narrow head width, rotating grip inserts make this an ideal tool, especially in confined areaschrome vanadium electric steel, forged, oil-hardened"

"To open and close Click clamps. Rotating jaw inserts for the safe actuation of clamps in any position.Good leverage which allows clamps to be opened and closed again comfortably and easily without a great deal of effortfor easy working on fuel hoses, vacuum pipes and suction nozzles and many other applicationsadditional function: detach hoses gently using the serrated jawslim head design - narrow head width, rotating grip inserts make this an ideal tool, especially in confined areaschrome vanadium electric steel, forged, oil-hardened"

"Ear clamp pliersfor the simple and reliable mounting of one-ear and two-ear clamps (Oetiker system or similar)no damage to the press points on the ear clampsthe slim head permits good accessibility in confined areasversatile use for clamps on CV boots, cooler and fuel lines, air pressure systems, compressorsdurable and stronghigh-grade special tool steel, forged and oil-hardened"

"For holding insulating mats in place.with integrated springfully insulating to reduce risk of short circuitsolid plastic, fibreglass-reinforced"

"Side-cutting ear clamp pliersfor the simple and reliable mounting of one-ear and two-ear clamps (Oetiker system or similar)no damage to the press points on the ear clampsparticularly versatile thanks to additional side cutterthe slim head permits good accessibility in confined areasversatile use for clamps on CV boots, cooler and fuel lines, air pressure systems, compressorsdurable and stronghigh-grade special tool steel, forged and oil-hardened"

Electronics sidecutters, Super-KnipsFor precision work onelectronicparts.Play-free joint,extremely effortless motion,precision-milledcutting edges without grindingwith opening spring andlimiter.Length 125 mm, withoutbevelCutting force:Soft wire from 0.2 to1.6 mm in diameter,hard wire up to0.6 mm in diameter.

Keep your desk tidy and make the most of the available space with the Leitz Ergo Pegboard desk organiser. Easily mounted on or under a desk or table, this unique vertical desk organiser provides instant storage for everything from headsets to notepads and pens. Keep all important things in an orderly and easy-to-find manner, creating valuable space on your desk. Simply place the supplied storage accessories made of robust, 85% recycled plastic (1 x notepad holder, 1 x pen holder and 1 x suspension hook for a headset) on the perforated wall to create your own personal workplace. The Pegboard Organiser, developed in Germany and compatible with most desks with a maximum table top thickness of 35 mm, is easy to attach. The pegboard is made of durable 8 mm thick MDF (medium-density fibreboard) to ensure strength and stability. Soft rubber pads protect the desk surface from scratches.

"Keep your desk tidy and make the most of the space available with the Leitz Ergo Pegboard Desk Organiser with laptop holder. This unique desk organisers is easy to mount to a desk or table and will bring your laptop screen (up to 15"" laptop with a max depth of 245 mm) to the perfect height to help prevent neck and back pain while working. It also creates instant vertical storage for everything from headsets and notepads to your smartphone and pens. Keep all your essentials organised, easy to find and free up valuable space on your desk whilst creating an ergonomic workstation. Two convenient hanging hooks for a bag or jacket are found on the back of the organiser."

"CLIP-IT - the rotatable and swiveling smartphone clamp holder for car air vents.The smart holder for all 4"" - 5.5"" smartphones with free adjustable viewing angle thanks to a 360°- ball joint! Quick to install - the rubber plug with toggle switch is adjustable in 2 steps (1.5 - 2.5 mm and 2.5 - 3.5 mm) depending on the thickness of the ventilation louvers, and therefore ensuring a safe and stable fixation of the smartphone holder. The soft-touch clamp with spring mechanism securely holds all smartphones with a width from 5.5 to 8.0 cm regardless of brand. All functions of the smartpones are freely accessible, even charging while driving through a USB charger for car cigarette ignitor is possible. Size: 67 mm width x 81 mm length."

cable clamp 16 mm, black: Reliable cable fastening for indoor and outdoor use Efficient cable organisation with robust cable clipsPack: 100 pieces in plastic box (please only specify pack unit as order quantity)The cable clip 16 mm, black is the ideal solution for the safe and tidy laying of cables with a diameter of up to 16 mm. Perfect for attaching to walls, door frames and corners, this cable organiser ensures neat cable routing and prevents cable clutter in your home or office. High-quality materials for long-lasting attachment Made from stabilised PE plastic and fitted with galvanised steel nails, these cable clips offer excellent insulation, corrosion resistance and ageing resistance. They are suitable for both indoor and outdoor use and can withstand adverse weather conditions. Easy handling and quick installation The cable clamp is designed for surface mounting on wood or masonry and can be attached quickly and easily thanks to the pre-assembled nail. The indication of the cable diameter on the clamp enables quick orientation and selection of the right clamp for your cables. Practical delivery in a resealable box The cable clamps are supplied in a practical, resealable box containing 100 pieces. This makes storage and access easier, so you always have the right number of clamps to hand. Ideal for various applications With a nail size of 2.2 mm x 30,9 mm, these cable clamps are ideal for a variety of applications, from cable laying in residential and commercial premises to outdoor use. Technical data: Colour: blackHeight: 18.2 mmDiameter: 16 mmConsumption unit: 100 pcs. in plastic box

"LED clamp light, 4000 K, 200 lm, 360° flexible neck, 3 brightness levels, touch operation, whiteDiscover lighting freedom with our compact LED clamp light! This versatile lamp is the ideal solution for those who need an efficient and eye-friendly light source. Whether at your desk, by your bed or on a shelf, with its practical clamp design, this lamp can be easily attached to any surface with a thickness of 1.5 to 3 cm.LED clamp light for surface thicknesses from 1.5 to 3 cmLight source: 8x 2835 SMD LEDInput power: 5 V DC/1 A (5 W)Colour temperature: 4000 K, 400 lmRated power: 3.8 W max.Flexible gooseneck - adjustable to any angleBrightness controlled over three levels via touch operationCable length: 80 cmColour: white"

Application:Simple hose clamps e.g. on washing machinesRotating jaws - for tight spacesSurface: ChromedMade In GermanyDimensions / Length: 206 mmNet weight (kg): 0.2 kgClamping range: 40 mm