40 products were found matching your search for digil in 1 shops:

Cmod A7: Breadboardable Artix-7 FPGA Module Product DescriptionThe Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and MicroBlaze embedded soft-core processor designs using Xilinx's development software, Vivado. There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just 0.7” by 2.75”, it can also be loaded in a standard socket and used in embedded systems.FPGA-Features:• Cmod A7-35T • FPGA part: XC7A35T-1CPG236C • 1 MSPS On-chip ADC: Yes• Programming options: Quad-SPI Flash/JTAG • Look-up Tables (LUTs): 20,800• Flip-flops: 41,600 • Block RAM: 225 KB • Clock Management Tiles: 5 • DSP Slices: 90 System Features:• 512KB SRAM with an 8-bit bus and 8ns access times• 4MB Quad-SPI Flash• USB-JTAG Programming Circuitry• Powered from USB or external 3.3-5.5V supply connected to DIP pinsSystem Connectivity• USB-UART bridgeInteraction and Sensory Devices• 2 LEDs• 1 RGB LED• 2 Push ButtonsExpansion Connectors• 48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)• One Pmod connector with 8 Digital I/O

The Breadboard Canvas is a replaceable physical interface for the Analogue Discovery Studio, which is arranged around a large breadboard surface. In a laboratory environment or at home, where the Analogue Discovery Studio is widely used with multiple projects, the Breadboard Canvas can be easily exchanged via the magnetic interface or used for multiple projects. In this way, multiple projects can be conveniently demonstrated without the need to disassemble circuits or share the device with multiple students, each with their own screen.

BNC Adapter for Analog DiscoveryProduct Description:The BNC Adapter Board for the Analog Discovery is intended to be used with the Analog Discovery™ tool to enable the use of standard BNC-terminated test leads and probes. It provides BNC terminations to each of the two oscilloscope channels on the Analog Discovery. Each channel of the oscilloscope can be selected as AC or DC coupled by adjusting the jumper that is located behind that channel's BNC input connector. In addition, the two AWG channels are also equipped with BNC terminations, and each channel can have either the 50-ohm or the 0-ohm termination selected. This enables the user to match the Analog Discovery's output impedance with either standard 50-ohm test leads or to be directly tied to the lead.Features:• Allows the use of standard BNC-terminated test leads & probes on your Analog Discovery• Selectable AC and DC coupling to oscilloscope probes• Selectable 50-ohm or 0-ohm output impedance on arbitrary waveform generator (AWG) channels• With the Discovery BNC, the differential scope inputs of the Analog Discovery become single-ended with the negative input connected to the ground.Note: The BNC Adapter Board for the Analog Discovery does not have differential analog (scope) inputsWhat's Included:• BNC Adapter Board for the Analog Discovery• Two standoffs

Pmod TC1: K-Type Thermocouple Module with WireProduct Description:The Digilent Pmod TC1 is a cold-junction thermocouple-to-digital converter module designed for a classic K-Type thermocouple wire. With Maxim Integrated's MAX31855, this module reports the measured temperature in 14-bits with 0.25°C resolution.Features:• K-type thermocouple-to-digital converter• Wide temperature range of -73°C to 482°C with provided wire• ±2°C accuracy from -200°C to 700°C• 14-bit with 0.25°C resolution• Cold-junction temperature compensation• Small PCB size for flexible designs 1.0 in × 0.8 in (2.5 cm × 2.0 cm)• 6-pin Pmod connector with SPI interface• Follows Digilent Pmod Interface Specification Type 2• Library and example code available in resource centerWhat's Included:• Pmod TC1• Custom antistatic Pmod packaging• 30cm of K-type thermocouple wire with 482 °C rated insulation

Pmod ESP32: Wireless Communication ModuleProduct Description:The Pmod ESP32 provides an easy and cost effective way to add wireless communication to any host platform or project. It uses the fully certified ESP WROOM-32 Wi-Fi + BLE + BT module from Espressif Systems. It is suitable for a wide variety of applications, from low-power sensor networks to more demanding tasks such as music streaming. The Pmod form factor is perfect for quickly turning your board into a powerful IoT platform using the pre-loaded AT command firmware, or for evaluating the ESP32 radio itself. The ESP-WROOM-32 can be used successfully as a peripheral or as a standalone device.This product was designed in collaboration with Renesas Synergy and is supported in the Renesas Synergy Platform.Features:• Wi-Fi, Bluetooth LE, and Bluetooth communication available• 20.5 dBm output power at the antenna• User button for resetting the processor after a mode switch• User switch for toggling between UART and SPI communication• Low power sleep mode for battery powered applications• 12-pin Pmod connector with SPI and UART interfaces• Follows Digilent Pmod Interface Specification Types 2A and 3AWhat's Included:• Pmod ESP32• Custom anti-static packaging

Digital Discovery high-speed adapters and logic probesProduct descriptionThe high-speed adapter for the Digital Discovery 32-pin connector is an alternative to the 2X16 Flywire assembly. It provides access to up to 24 high-speed logic probes and enables increased sampling rates of up to 800 MS/s on Digital Discovery. The adapter is not coded and both orientations can be used because the twisted wires are not colour coded.Digital Discovery comes with a package of 16 high-speed logic probes. Each cable has a GND wire (black) twisted to a DIN_USR wired (coloured). The wires are connected to the high-speed adapter via a 2-pin socket and two 1-pin sockets to the device being tested. A 100 O resistor is embedded in the signal wire at the end closest to the component being tested. All GND wires should be connected to earth of the component being tested.

Pmod LVLSHFT: Logic Level ShifterProduct Description:The Digilent Pmod LVLSHFT is a digital logic level shifter that uses the Texas Instruments SN74LVC1T45 tranceiver. This module is ideal for users who want to supply logic signals following a 3.3V CMOS standard but have an alternate logic level output that is used for other applications, such as JTAG programming.Features:• Digital logic level shifter• Translate logic signals between two user supplied voltage levels• 2×7 JTAG header• 8 miniature switches to dictate logic level conversion• Voltage range between 1.8V and 5.5V• Small PCB size for flexible designs 1.8 in × 0.8 in (4.6 cm × 2.0 cm)• 12-pin Pmod connector with GPIO interfaceWhat's Included:• Pmod LVLSHFT• Custom antistatic Pmod packaging

Impedance Analyzer for Analog DiscoveryDescription:The Impedance Analyzer for Analog Discovery was designed with automatically adjusting reference resistors and relays to aid in use of the Impedance Analyzer tool in WaveForms. With the Impedance Analyzer accessory, the Analog Discovery will automatically select the most appropriate configuration for the attached unknown impedance. The Impedance Analyzer is loaded with the 2×15 Analog Discovery connector, which makes it compatible with Analog Discovery 2 as well as Analog Discovery Legacy.Features• 2-wire Impedance Analyzer integrates with the Impedance Analyzer tool in WaveForms• 50pF - 500µF Capacitance Measurement Range • 10µH - 1000mH Inductance Measurement Range • 1Hz - 15MHz Excitation Frequency RangeNote: Use of this adapter requires WaveForms version 3.8.2 or later.What's Included:• Analog Discovery Impedance Analyzer• Anti-static packaging

Pmod MicroSD: microSD Card SlotProduct Description:The Pmod MicroSD provides a microSD card slot to any board that has 3.3V logic and is pin compatible with a 12-pin Pmod port capable of SPI communication. It allows the host board to read and write to the microSD card over a SPI interface. With no file system limitation or maximum memory size, the Pmod MicroSD allows users to store and access large amounts of data from the host board. Features:• microSD card breakout to Pmod™ Port or 2.7-3.6 V logic level• Store and access large amounts of data from the host board• No limitation on file system or memory size of microSD card used• 1-bit and 4-bit communication• 12-pin Pmod port with SPI interface• Follows the Digilent Pmod Interface Specification 1.2• microSD card is not included, but can be purchased hereWhat's Included:• Pmod MicroSD• Custom anti-static Pmod packaging

GeneralThe Analog Discovery Studio is a fully functional, portable test and measurement instrument that can transform any cross-functional room into a pop-up electronics lab. Equipped with 13 instruments, including an oscilloscope, logic analyzer, spectrum analyzer, waveform generator, and more, the Analog Discovery Studio provides a full stack of bench-top instruments with a convenient, interchangeable, breadboarded interface that's perfect for students to learn anywhere.As lab space becomes less available and student enrollment increases, many institutions are opting for studio learning to supplement traditional labs, creating a need for a portable test and measurement device that can support all types of circuit projects. With an Analog Discovery Studio, students can continue their hands-on learning in the library, in office hours, in a tutoring center, in a classroom, at home, or even in a coffee shop. The Analog Discovery Studio supports hands-on learning for any student and is available with free Mac, Linux and Windows compatible WaveForms software.The Analog Discovery Studio is designed to be a compact alternative to a stack of desktop units. Its rugged case measures 1.25 x 9.25 x 7.5 inches and fits on a table, desk or in a backpack. Students can access the oscilloscope and waveform generators via breadboard-enabled MTE cables or industry-standard BNC cables, while the logic analyzer, pattern generator, and triggers are accessible via MTE cables. Circuits or designs can be built on the included magnetically-connected Breadboard Canvas and conveniently swapped out or removed for transport, making the transition from lab work to home work as seamless as possible. The Breadboard Canvas also features power outputs controlled by physical switches, integrated general I/O, and a large breadboard area. The Breadboard Canvas and the cost-optimized Blank Canvas can be purchased separately if another is needed or the breadboards are worn out. Analog inputs Use in oscilloscope, network analyzer, spectrum analyzer, voltmeter, impedance analyzer and data logger. 2 analog input channels, accessible via BNC or MTE connectors channel type: differential (with MTE) or single-ended (with BNC) analog bandwidth with BNC cables: 30+ MHz @ 3 dB analog bandwidth with MTE flywires: 9 MHz @ 3 dB input range ±25 V (±50 V diff) input protected up to ±50 V 14 bit resolution Sampling rate 100 MS/sAnalog outputs Use in waveform generator and network analyzer Two arbitrary waveform generator channels, accessible via BNC or MTE connectors AC amplitude (max): ±5 V Analog bandwidth (BNC or MTE connectors: 8 MHz @ 3 dB) Sampling rate 100 MS/sDigital inputs/outputs<ul...

Zmod DAC 1411: SYZYGY-compatible Dual-channel 14-bit Digital-to-Analog Converter ModuleProduct Description:The Zmod DAC is one of Digilent's first SYZYGY-compliant expansion modules. The SYZYGY standard offers a much higher speed/bandwidth digital interface than Pmods, but at a much smaller and lower-cost form-factor than FMC, enabling the user to configure an FPGA development board with the right I/O for their application. Driven by the SYZYGY carrier, the Zmod DAC can simultaneously generate two ±5V signals with 14 bits of resolution at a sample rate up to 100MS/s. The analog outputs can be connected to a circuit using SMA cables. When coupled to a base board using SYZYGY expansion, like the Eclypse Z7 or Genesys ZU, the combination will serve as a powerful prototyping platform for instrumentation, high-speed control, and SDR products. By utilizing these expansion capabilities, users can spend more time on the analytical and system-level aspects of the solution rather than having to focus on the component-level interactions of the devices. Features:• Channels: 2• Channel type: single-ended• Resolution: 14-bit• Absolute Resolution (amplitude =1.25V): 167µV• Absolute Resolution (amplitude >1.25V): 665µV• Output impedance: 50O• Sample rate (real time): 100MS/s.• AC amplitude (max): ±5 V.• Analog bandwidth: 40 MHz @ 3dB, 20 MHz @ 0.5dB, 14 MHz @ 0.1dB• Slew rate (2V step): 180V/µs

Zmod ADC 1410: SYZYGY-compatible Dual-channel 14-bit Analog-to-Digital Converter ModuleProduct Description:The Zmod ADC is one of Digilent's first SYZYGY-compliant expansion modules. The SYZYGY standard offers a much higher speed/bandwidth digital interface than Pmods, but at a much smaller and lower-cost form-factor than FMC, enabling the user to configure an FPGA development board with the right I/O for their application. Driven by the SYZYGY carrier, the Zmod ADC can simultaneously acquire two ±25V signals with 14 bits of resolution at a sample rate up to 100MS/s. Analog inputs can be connected to a circuit using SMA cables. When coupled to a base board using SYZYGY expansion, like the Eclypse Z7 or Genesys ZU, the combination will serve as a powerful prototyping platform for instrumentation, high-speed control, and SDR products. By utilizing these expansion capabilities, users can spend more time on the analytical and system-level aspects of the solution rather than having to focus on the component-level interactions of the devices. Features:• Channels: 2• Channel type: single-ended• Resolution: 14-bit• Input range: ±1V (High Gain) or ±25V (Low Gain)• Absolute Resolution 0.13mV (High Gain) or 3.21mV (Low Gain)• Sample rate (real time): 100MS/s• Input impedance: 1MO 18pF• Analog bandwidth: 70 MHz+ @ 3dB, 30 MHz @ 0.5dB, 20 MHZ @ 0.1dB• Input protected to: ±50V

Cmod S7: Breadboardable Spartan-7 FPGA ModuleProduct Description:The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well-suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.Features:• Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C) - 3,650 slices containing four 6-input LUTs and 8 flip-flops - 1,620 Kbits of fast block RAM - Three clock management tile, each with a phase-locked loop and mixed-mode clock manager - 80 DSP slices - Internal clock speeds exceeding 450 MHz - On-chip analog-to-digital converter (XADC) - Programmable over JTAG and Quad-SPI Flash• Memory - 4 MB Quad-SPI Flash• Power - Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)• USB - USB-JTAG programming circuitry - USB-UART bridge• Push-buttons and LEDs - 2 Buttons - 4 LEDs - 1 RGB LED• Expansion Connectors - 1 Pmod connector - 8 total FPGA I/O - 48-pin DIP form-factor headers - 36 populated pins - 32 total FPGA I/O - 2 Single-ended 0-3.3V analog inputs to XADCWhat's Included:• Cmod S7• Digilent cardboard packaging with protective foam inserts

Pmod BT2: Bluetooth InterfaceProduct Description:The Pmod BT2 is a powerful peripheral module employing the Roving Networks® RN-42 to create a fully integrated Bluetooth interface. Users can communicate with the chip via UART and can also use the secondary SPI header on the board for updating the RN-42 firmware if needed.Note:The Pmod BT2 is also featured in a fantastic product bundle, the Zybo Pmod Pack! This bundle was designed to expand project possibilities by utilizing a variety of peripheral modules perfectly suited for the Zybo Zynq-7000 FPGA.Features:• Bluetooth 2.1/2.0/1.2/1.0 compatible• Add wireless capability with this low power, Class 2 Bluetooth radio• Supports HID profile for making accessories such as pointing devices, etc.• Secure communications, 128-bit encryption• Six different modes• Small PCB size for flexible designs 1.5“ × 0.8” (3.8 cm × 2.0 cm)• 12-pin Pmod connector with UART interfaceWhat's Included:• Pmod BT2• Custom antistatic Pmod packaging

Digilent development moduleThe Pmod SD provides a full sized SD card slot that can be accessed through SPI.• No limitation on file system or memory size of SD card used• 1-bit and 4-bit communication

Breadboard Adapter for Analog DiscoveryProduct Description:The Breadboard Adapter is intended to be used with the Analog Discovery tool to provide a prototyping surface with a secure connection. It provides a female header to pass through all connections from the Analog Discovery 2 as well as a prototyping surface. The PCB provides two power rails directly routed from the V+ and V- pins on the Analog Discovery. Components and wires can be soldered to the prototyping surface and power rails. Alternatively, the half-sized breadboard can be affixed (permanently) to the adapter to provide connections. Features• Protoboard area consists of twenty-six rows of 10 plated through-holes • Two 26 hole V+, V-, and GND rails routed from the 30-pin connector• 30-pin female headers pass through all signals from the Analog Discovery• One half-sized solderless breadboard is included• Provides an alternative to the flywires for Analog DiscoveryWhat's Included::• One Breadboard Adapter for the Analog Discovery

Cora Z7: Zynq-7000 Single Core for ARM/FPGA SoC Development (Cora Z7-07S)Description:The Digilent Cora Z7 is a ready-to-use, low-cost, and easily embeddable development platform designed around the powerful Zynq-7000 All-Programmable System-on-Chip (APSoC) from Xilinx. The Zynq-7000 architecture tightly integrates a single or dual core 667MHz ARM Cortex-A9 processor with a Xilinx 7-series FPGA. This pairing grants the ability to surround the processor with a unique set of software-defined peripherals and controllers, tailored for the target application.The Cora Z7’s wide array of hardware interfaces, from a 1Gbps Ethernet PHY to analog-to-digital converters and general-purpose input/output pins, make it an ideal platform for the development of a vast variety of embedded applications. The small form factor and mounting holes make the Cora Z7 ready to be used as one component of a larger solution. The on-board SD Card slot, Ethernet, and Power solution allow the Cora Z7 to operate independently of a host computer.Features:ZYNQ Processor• 667MHz dual-core (*single-core) Cortex-A9 processor• FPGA Programmable logic equivalent to Artix-7 FPGA - 4,400 Programmable logic slices (*3,600) - 80 DSP slices (*60) - 270 KB of block RAM (*225 KB)• DDR3 memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports• High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO• Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C• Dual-channel, 1 MSPS internal analog-digital converter• Programmable from JTAG and microSD cardMemory• 512MB DDR3 with 16-bit bus @ 1050Mbps• microSD slotPower• Powered from USB or any 4.5V-5.5V external power sourceUSB and Ethernet• Gigabit Ethernet PHY with 48-bit globally unique EUI-48/64™ compatible identifier available on sticker• USB-JTAG programming circuitry• USB-UART bridge• USB OTG PHY (supports host only)Push-buttons and LEDs• Two Push-buttons• Two RGB LEDsExpansion Connectors• Two Pmod connectors - 16 Total FPGA I/O• Arduino/chipKIT Shield connector - Up to 49 Total FPGA Digital I/O - 6 Single-ended 0-3.3V Analog inputs to XADC - 8 Differential 0-1.0V Analog inputs to XADC• Unloaded expansion header - 12 additional FPGA Digital I/OWhat's Included:• Cora Z7-07S or Cora Z7-10• Custom Digilent cardboard box with protective foam inserts

Digilent's latest multifunction measuring device, also known as the AD3, is a digital oscilloscope, logic analyser, waveform generator, pattern generator and much more. Using the flexible WaveForms software (supported by Windows, Mac and Linux), the Analog Discovery 3 can be used in the laboratory, in the field or even at home - you're no longer tied down to a traditional laboratory bench and stacks of expensive test instruments.OscilloscopeTwo differential channels with 14-bit resolution at up to 125 MS/s per channel with an input range of +/-25 V, 30+ MHz bandwidth with BNC adapterUser-configurable hardware input filtersFFT, spectrogram, lock-in amplifier, additional software input filters, eye diagram, XY plot views and much more in the WaveForms application

Pmod OLED: 128 x 32 Pixel Monochromatic OLED DisplayProduct Description:The Pmod OLED is 128x32 pixel monochrome organic LED (OLED) panel powered by the Solomon Systech SSD1306. Users can display any sort of graphical design by programming the device through SPI as well as sending bitmap images. This module uses the UG-2832HSWEG04 display from Univision Technology Inc. Features:• 128×32 pixel graphic OLED display• Clock speeds of up to 10 MHz• Internal display buffer• 16 different brightness settings• Small PCB size for flexible designs• 12-pin Pmod connector with SPI interface• Library and example code available in resource centerWhat's Included:• Pmod OLED• Custom anti-static Pmod packaging

Are you looking for a high-quality digital oscilloscope at an affordable price? Then the Analog Discovery 3 Pro Bundle from Digilent is for you! This Analog Discovery Kit is the perfect solution for engineers, students and hobbyists who need a portable digital oscilloscope for a variety of projects. This comprehensive package includes the new Analog Discovery 3, a digital oscilloscope for the PC, as well as carefully selected accessories and components to help you tackle any electronics project. As a digital storage oscilloscope, the Analog Discovery 3 provides high quality, reliable measurements and analysis with powerful yet easy-to-use features. The Digilent Analog Discovery Kit is a versatile device that includes a range of test and measurement tools, including a dual-channel oscilloscope, waveform generator, power supply and more. Analog Discovery 3 is Digilent's latest multi-function test and measurement device, also known as AD3, is a digital oscilloscope, logic analyzer, waveform generator, pattern generator and more. With the flexible WaveForms software (supported by Windows, Mac and Linux), the Analog Discovery 3 can be used in the lab, in the field or even at home - you're no longer tied to a traditional lab bench and a stack of expensive test instruments.Scope of delivery BNC adapter card for the Analog Discovery BNC oscilloscope x1/x10 probes (pair) Mini Grabber Test Clips (pack of 6) Analog Discovery 3 and the following: A plastic project box One USB-C® to USB-C programming cable One 2x15 Flywire signal cable 5 pcs. 6-pin headers 30-pin Flywire labels 1 year subscription to Multisim Live and a 30-day trial version of EveryMeasure with 5 GB and 5 users (requires registration of Analog Discovery 3)