187 products were found matching your search for ferrous in 2 shops:

The PROXXON sanding drum with sanding bands is ideal for sanding, smoothing and polishing malleable cast iron, grey cast iron, stainless steel, steel, non-ferrous metals, wood and plastic. Also suitable for chamfering. Adjust the speed to the material being sanded: high for steel, medium for wood and low for plastic. Made of standard corundum.

In the midst of Sweden's lush green landscape, the red cottage stands timeless, drenched in earth and rain. The scent of sunlit wood, ferrous and marked by the ravages of time, invites you to escape modern life and return to the tranquil rhythms of nature. Top notes: black pepper, ironHeart notes: incense, oak woodBase notes: cedarwood, amber, myrrhApplication: Apply to wrists and neck/throat.

VKS_QUICKCompressed non-woven compact disc with quick-action clamping system for pre-polishing stainless steel for use on adjustable straight and compressed air grinders.Compact grinding non-woven material.

is designed specifically for ultrasonic cleaning and intensified as additive the cleaning process. Removes dirt and acts deoxidize. Good for shell casings, circuit boards, circuit boards, jewelry, watches, etc..Remove:light impurities, acts deoxidizeSuitable for:cartridges sleeves, printed circuit boards, boards of maintenance, jewelry, watches, etc.Application:5% EM-700. (With respect to capacity) for 1-10 minTempeture:20-80°C- In case of appropriate application a quick and gentle cleaning is guaranteed! -Attention!!!After cleaning, cleaned parts rinse carefully with water!Spezeally developed für Ultrasound!

Universal drill bit, 3.0 mmAreas of application:Masonry, tiling, (some) glass, marble, plastics, metal, non-ferrous metals, coated chipboard, lightweight materials.These drill bits are not intended for rotary percussion drilling, but may be used for light percussion drilling.1 item per self-service pouch.

Tungsten-vanadium steel twist drill.Shaft and drill bit manufactured from a one-piece blank. Good degree of hardness ensures a long service life. For drilling metal, non-ferrous metal, plastic, circuit boards, and soft and hard wood.

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm.11.5 mmArea of use:Steel, iron, cast iron, non-ferrous metal, plastics.In self-service pouch.Contents: 1 pieces

Universal drill bit, 5.0 mmAreas of application:Masonry, tiling, (some) glass, marble, plastics, metal, non-ferrous metals, coated chipboard, lightweight materials.These drill bits are not intended for rotary percussion drilling, but may be used for light percussion drilling.1 item per self-service pouch.

Precisely milled dovetail guides. This makes it also suitable for metalworking.For grooving and milling machine steel, non-ferrous metal, plastic and wood. Each track has a locking device. Guides can be readjusted without play. Adjustment by 2 setting wheels with adjustable 0-position. 1 revolution = 2 mm feed. 1 partial line = 0.05 mm feed. Face-milled surface area. Three continuous T-grooves according to MICROMOT standard (12 x 6 x 5 mm). This includes a stop with predetermined fits (also for 45°), fixing screws and a clamp. Surface area 200 x 200 mm. Maximum stroke 150 x 150 mm. Height 75 mm. Weight: 4.9 kg.

The fabric is suitable for universal, heavy-duty processing of alloyed and non-alloyed steels as well as non-ferrous metals. The carton has a tear-off edge for separating off sections of the abrasive strip at the workplace.Technical data:PFERD TOOLS type: SBR 38Width metric: 38 mmHole dia.: 75 mmAbrasive: corundum ALength metric: 25 mGrain size: 80Advantages:Optimum contour adjustment due to high flexibility.Low wear due to high tear resistance and very good grain adhesion.Recommendations for use:Cut to the required size if necessary.

The fabric is suitable for universal, heavy-duty processing of alloyed and non-alloyed steels as well as non-ferrous metals. The carton has a tear-off edge for separating off sections of the abrasive strip at the workplace.Technical data:PFERD TOOLS type: SBR 38Width metric: 38 mmHole dia.: 75 mmAbrasive: corundum ALength metric: 25 mGrain size: 40Advantages:Optimum contour adjustment due to high flexibility.Low wear due to high tear resistance and very good grain adhesion.

4.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt.Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics.Contents:1 item per self-service pouch

The sets contain high-performance countersinking tools with a countersinking angle of 90° for sinking 90° screws for all common materials such as steel, cast steel and non-ferrous metals. The shatter-proof plastic box protects the tools from dirt and damage.Technical data:Quantity: 3PFERD TOOLS Type: SET KES HSS DIN 335 C90° 3Version: HSSContents, tool diameter: 6.3/10.4/16.5Advantages:Excellent removal rate and optimal chip removal.Burr-free results even at low cutting speeds.Long service life.Excellent surface quality of the workpiece.Can be used universally on almost all materials.Recommendations for use:Particularly suitable for producing countersinks for 90° screws.Use cutting oil or compressed air as the coolant/lubricant.

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm.9.00 mmArea of use:Steel, iron, cast iron, non-ferrous metal, plastics.In self-service pouch.Contents: 1 pieces

Roll-forged drill bit, for drilling steels with a strength of up to approx. 1100 N/qmm.2.00 mmArea of use:Steel, iron, cast iron, non-ferrous metal, plastics.In self-service pouch.Contents: 3 pieces

Layer thickness measuring devices are used for the non-destructive measurement of coatings such as paint, colour and plastic on metallic surfaces. The new PeakTech 5220 works according to the eddy-current principle and is suitable for both ferrous metals (Fe), such as steel, and non-ferrous metals (non-Fe), such as aluminium or copper. This measuring device is extremely precise and has a German and English user interface with menu control on the easy-to-read-matrix LCD display with background lighting. In addition to the many measurement functions, such as minimum and maximum value, mean, high and low alarm and much more, this model also features an internal data memory that can hold four measuring groups. The saved measurement values can then be read using the supplied software by connecting the USB cable, and can then be processed further as a text file or as an Excel table.To increase measuring accuracy, the PeakTech 5220 offers an easy-to-use calibration and zeroing function. This means that the measuring device is particularly suitable for measuring paint thicknesses in the automotive sector, for painting and varnishing applications, for electroplating and anodizing proceduresand for other industrial metal coating procedures.Matrix LCD display with graphical menu guideMeasurement type: eddy-current methodMeasurement range: 0 - 1300 µmAccuracy: ±3% of measurement valueSuitable for Fe and non-Fe metalsMin, max, mean and high/low alarmZeroing and calibration functionInternal storage for 80 measurement values per measurement groupAutomatic power-offAccessories: batteries, carrying case, operating instructions, calibration kit, USB cable and PC software for Windows

8.50-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt.Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics.Contents:1 item per self-service pouch

9.00-mm HSS cobalt stainless steel drill bit made from tungsten-molybdenum steel with 5% cobalt.Area of use: Stainless steel, steel, iron, cast iron, non-ferrous metals, plastics.Contents:1 item per self-service pouch

More cutting edges mean less cutting effort and a higher feed. Particularly suitable for: aluminium, non-ferrous metals and plastic.Significantly reduces the risk of splitting when drilling in plastic.Size 1Bore range 4.0 mm - 20.0 mmOverall length 75 mm9 stepsShaft Ø 8

Application:Flexible plastic plug-in strip with 1/2'' square socketsMagnetic underside ensures grip on all ferrous surfaces, e.g. on workshop carts, tool walls, machines, lifting platforms and in metal drawersEasy to cleanLong-lasting, robust rotary lock for secure seating and immediate accessSecure fixed in locked state: To remove socket turning to the leftRobust metal eye for hanging, e.g. on a hook5 slotsDrive: Square 12,5 mm (1/2 inches)Output: Outside double hexagonal traction profileDimensions / Length: 245 mm x 37.4 mmNumber of tools: 5