2507 products were found matching your search for insulation in 1 shops:

The Fluke 1507 and 1503 insulation testers are handy, robust, reliable and easy to use. Since they have multiple test voltages, they are ideal for troubleshooting, set-up and preventative maintenance.• Insulation testing range: 0.01 Mohm to 10 Gohm• Insulation testing voltages: 50 V, 100 V, 250 V, 500 V, 1000 V• Automatic calculation of the polarisation index and dielectric absorption level• With the Compare function (good/bad) repetitive tests can be performed quickly and easily• A probe with release button makes repetitive tests or tests on hard-to-reach objects easier• Detection of live circuits prevents insulation tests at voltages over 30 V and thus increases the protection of the user• Automatic discharge of capacitive voltages for higher protection for the user• AC/DC voltage: 0.1 V to 600 V• 200 mA continuity• Resistance: 0.01 ohm - 20.00 kohm• Automatic shut-off to save battery power• Large backlit display for easy reading of measurements• Overvoltage category CAT IV 600 V for increased protection of the user• Probe with release button, test leads, test probes and crocodile clips included• Mounting options for the optional magnet holder Fluke TPAK for hands-free operation• Four alkaline batteries type AA (NEDA 15 A or IEC LR6) for more than 1000 insulation testsIncluded with deliveryTP165x slim probe with release buttonTL224 SureGrip silicon test lead setTP74 probes with pointed 4 mm banana plugsCrocodile clipsUser manual4 AA batteriesAC and DC voltage measurementInaccuracyRange: 600.0 VResolution: 0.1 V50 Hz to 400 Hz ± (% of MW + digits) ±(2% + 3)Input impedance: 3 Mohm (nominal), Common-mode rejection ratio (1 kohm unbalanced): > 60 dB at DC, 50 Hz or 60 HzOverload protection: 600 V effective or DCProtective conductor resistance measurementRange/resolution: 20.00 ohm 0.01 ohm200.0 ohm 0.1 ohm2000 ohm 1.0 ohm20.00 kohm 0.01 kohmInaccuracy: ±(1.5% + 3)Overload protection: 2 V effective or DCIdle test voltage: > 4.0 V, Short-circuit current: > 200.0 mAMeasuring and test functionsMeasuring range: 0.01 Mohm to 10 GohmTest voltages: 50 V, 100 V, 250 V, 500 V, 1000 VInaccuracy of the test voltage: + 20%, - 0%Short-circuit current: 1 mA nominalAutomatic discharge: discharge time Display for power circuit: prevents the test if external voltage before the beginning of the tests > 30 VMaximum capacitive load: can be operated with up to 1 µF loadInaccuracy when measuring:50 V: ±(3% + 5)100 V: ±(3% + 5)250 V: ±(1.5% + 5)500 V: ±(1.5% + 5)1000 V: ±(1.5% + 5) up to 2000 Mohm, ±(10% + 3) over 2000 Mohm

Lowers your costs: Long-lasting and robust thanks to metal blade insert.Protects your health: Damper enclosed for large cable cross-sections to reduce recoil and protect wrists.Saves time: Blades quickly exchanged by immediately available replacement blades in the handle.Increases your efficiency: Automatic stripping pliers for a wide range of cables between 0.03 and 16 mm².Wiha's automatic stripping pliers promise to deliver ''Skinning made easy''. The cutting function allows cables to be trimmed to the desired length. The integrated hand protection on the blade guards against injury and prevents cables in the cable assembly from being damaged accidentally thanks to its automatic closing function. Users can skin cables ranging between 0.03 and 16 mm² with just one set of pliers. The adjustable longitudinal stop ensures precise handling. The stripping pliers also impress thanks to their whisper-quiet function. The supplied damper can be inserted into the pliers to reduce recoil and protect the wrist when skinning large cable gauges of 6 mm² and above. The spare blades and exchange aids contained in the handle are ready for use instantly. Once the handle is locked into place, these stripping pliers save space and are securely locked, making them ideal to carry from job to job.Application: For stripping, skinning and trimming cables between 0.03 and 16 mm².

The tesaflex 53988 electrical insulation tape is a reliable helper for electricians, fitters and other tradesmen. It is characterized by its relatively thick backing material, high flexibility and very good adhesive performance (also on steel and at low temperatures). The PVC insulating tape is not only suitable for insulating and marking cables, but also for repairing and bundling. As it is available in 9 colors - black, white, red, gray, blue, Brown, green, yellow and yellow-green - it is also possible to use it as a marking tape. Tesaflex 53988 is certified to all relevant standards and is easy to use. Ideal for applications in the electronic sector, e.g. insulation or marking of cablesCertified according to IEC 60454-3-1 (VDE, IMQ, SEMKO), VOC -certified, RoHS and REACH compliantThick backing material (150µm)High dielectric breakdown voltage (7.000V)Temperature resistant up to +90°C.Available in 9 different colors

The weather-resistant tesamoll® E-Profile sealing tape reliably closes gaps in windows and doors that are between 1 and 3.5 mm wide. The sealing strip is self-adhesive and can be attached in no time at all.The high adhesive strength and high-quality material ensure a long minimum durability of eight years. If the gap is covered appropriately, the sealing strip can save up to 20% on heating costs. Sealing tape for gaps from 1 - 3.5 mmself-adhesive - easy to installSaves up to 20% of heating costsEasy to remove againHigh UV and ozone resistanceTemperature resistant from -50°C to +60°Durability: 8 yearsWidth: 9 mmHeight: 4.0 mmLength: 6 mColor: white

The tesa INSULATION sealing tape is your solution for leaky windows and doors. It effectively protects against cold, heat, noise and moisture and improves your indoor climate. Easy to install - self-adhesive, all you need is a pair of scissors. It seals gaps of 2-5 mm and is suitable for almost all types of windows and doors. UV and temperature resistant (-50°C to +60°C), it lasts up to 8 years. Easy to remove without leaving any residue. Details:Increased living comfort thanks to gap sealingSuitable for large gaps (L) from 2 mm to 5 mmEffective insulation against cold, heat, noise and moistureQuick and easy installation (self-adhesive)Durability: 8 yearsEasy to removeHigh UV and ozone resistanceTemperature resistant from -50°C to +60°Ctesa - more than just an adhesive tape The German company has been developing solutions for a wide range of applications for over 125 years. tesa is one of the world's leading manufacturers of adhesive tapes and adhesive system solutions and stands for innovative and high-quality products.

The tesa INSULATION sealing tape is your solution for leaky windows and doors. It effectively protects against cold, heat, noise and moisture and improves your indoor climate. Easy to install - self-adhesive, all you need is a pair of scissors. It seals gaps of 2-5 mm and is suitable for almost all types of windows and doors. UV and temperature resistant (-50°C to +60°C), it lasts up to 8 years. Easy to remove without leaving any residue.Details:Increased living comfort thanks to gap sealingSuitable for large gaps (L) from 2 mm to 5 mmEffective insulation against cold, heat, noise and moistureQuick and easy installation (self-adhesive)Durability: 8 yearsEasy to removeHigh UV and ozone resistanceTemperature resistant from -50°C to +60°Ctesa - more than just an adhesive tape The German company has been developing solutions for a wide range of applications for over 125 years. tesa is one of the world's leading manufacturers of adhesive tapes and adhesive system solutions and stands for innovative and high-quality products.

The tesa INSULATION sealing tape is your solution for leaky windows and doors. It effectively protects against cold, heat, noise and moisture and improves your indoor climate. Easy to install - self-adhesive, all you need is a pair of scissors. It seals gaps of 2-5 mm and is suitable for almost all types of windows and doors. UV and temperature resistant (-50°C to +60°C), it lasts up to 8 years. Easy to remove without leaving any residue.Details:Increased living comfort thanks to gap sealingSuitable for large gaps (L) from 2 mm to 5 mmEffective insulation against cold, heat, noise and moistureQuick and easy installation (self-adhesive)Durability: 8 yearsEasy to removeHigh UV and ozone resistanceTemperature resistant from -50°C to +60°C tesa - more than just an adhesive tape The German company has been developing solutions for a wide range of applications for over 125 years. tesa is one of the world's leading manufacturers of adhesive tapes and adhesive system solutions and stands for innovative and high-quality products.

The self adhesive, simple to attach tesamoll® E profile rubber seal for doors and windows and is extremely weather resistant due to the high quality of the rubber profile. Saves up to 20% heating costs (with corresponding gap cover).• For gaps of 1 - 3.5 mm• Can easily be removed again• High UV and ozone resistance• Temperature-resistant from -50°C to +60°C• Shelf life: 8 yearsWidth: 9 mmHeight: 4.0 mmLength: 6 mColour: brown

Scotch Super 33+ vinyl electrical insulation tape is the market-leading original PVC insulation tape.This professional-grade insulating tape features an elasticated backing material coated with a highly effective adhesive.It is ideal for the electrical primary insulation of all wires and cable connections up to 600 V and offers long-term, moisture-proof electrical and mechanical protection for a wide range of temperature applications from 18°C to 90°C in accordance with VDE.Its excellent elasticity, flexibility and restoring force over the entire temperature range enables wrinkle-free wrapping.It provides excellent protection against abrasion, copper corrosion, oil, solvents and UV radiation.Scotch Super 33+ vinyl electrical insulation tape is flame retardant to UL 510 and certified to UL, CSA and VDE.

pliers chrome plated, handles with multi-component grips

pliers black atramentized, head polished, handles with multi-component grips

pliers black atramentized, head polished, handles with multi-component grips

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross sectionIncrements in the jaw provide a visual orientation aid for stripping consistent lengths (11 mm and 16 mm)easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nutShear blade for cutting copper cable up to Ø 15 mm (5 x 2.5 mm²)slim dimensions for easy accessbolted joint: precise, zero backlash operation of pliersHigh-grade special tool steel, forged, multi stage oil-hardened

Form-fit stripping also of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber- multi-layer too.a second pair of blades holds the remaining insulation reliably in placereplaceable shaped blade adapted precisely to the respective conductor cross-sectionwith length stop for constant stripping length during repetitive workpliers body: steelblade: special tool steel, oil-hardenedespecially for cables in accordance with the American specification (AWG)

for single, multiple and fine stranded conductors with plastic or rubber insulation max. 5.0 mm dia. or resp. 10 mm² cable cross sectioneasy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nutSpecial tool steel, forged, oil-hardenedPliers with integrated, insulated tether attachment point for a tool tether

With long cutting edge High cutting performance due to power jointPrecision stripping holes for 1.5 and 2.5 mm² conductorsConvenient cutting of NYM cables up to 5 x 2.5 mm²Long tips for the finest cutting work even in confined spacesInductively hardened precision cutting edges, cutting edge hardness approx. 60 HRCWith comfort grips: made from three ergonomic components for optimized handling and with two KNIPEXtend interfaces for extensionsChrome-plated pliersChrome-plated headHandles with comfort gripsWeight 224 gDimensions 160 x 56 x 20 mmREACH conformity does not contain SVHCRoHS conformitynot applicableCutting values soft wire (diameter) Ø 2.5 mmCutting values medium-hard wire (diameter) Ø 1.5 mmStripping values square millimeters 1.5 / 2.5 mm²AWG 16 / 14

Form-fit stripping also of difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber- multi-layer too.a second pair of blades holds the remaining insulation reliably in placereplaceable shaped blade adapted precisely to the respective conductor cross-sectionwith length stop for constant stripping length during repetitive workpliers body: steelblade: special tool steel, oil-hardenedespecially for cables in accordance with the American specification (AWG)

The tesaflex 53988 electrical insulation tape is a reliable helper for electricians, fitters and other tradesmen. It is characterized by its relatively thick backing material, high flexibility and very good adhesive performance (also on steel and at low temperatures). The PVC insulating tape is not only suitable for insulating and marking cables, but also for repairing and bundling. As it is available in 9 colors - black, white, red, gray, blue, Brown, green, yellow and yellow-green - it is also possible to use it as a marking tape. Tesaflex 53988 is certified to all relevant standards and is easy to use. Ideal for applications in the electronic sector, e.g. insulation or marking of cablesCertified according to IEC 60454-3-1 (VDE, IMQ, SEMKO), VOC -certified, RoHS and REACH compliantThick backing material (150µm)High dielectric breakdown voltage (7.000V)Temperature resistant up to +90°C.Available in 9 different colors

The tesaflex 53988 electrical insulation tape is a reliable helper for electricians, fitters and other tradesmen. It is characterized by its relatively thick backing material, high flexibility and very good adhesive performance (also on steel and at low temperatures). The PVC insulating tape is not only suitable for insulating and marking cables, but also for repairing and bundling. As it is available in 9 colors - black, white, red, gray, blue, Brown, green, yellow and yellow-green - it is also possible to use it as a marking tape. Tesaflex 53988 is certified to all relevant standards and is easy to use. Ideal for applications in the electronic sector, e.g. insulation or marking of cablesCertified according to IEC 60454-3-1 (VDE, IMQ, SEMKO), VOC -certified, RoHS and REACH compliantThick backing material (150µm)High dielectric breakdown voltage (7.000V)Temperature resistant up to +90°C.Available in 9 different colors

The tesaflex 53988 electrical insulation tape is a reliable helper for electricians, fitters and other tradesmen. It is characterized by its relatively thick backing material, high flexibility and very good adhesive performance (also on steel and at low temperatures). The PVC insulating tape is not only suitable for insulating and marking cables, but also for repairing and bundling. As it is available in 9 colors - black, white, red, gray, blue, Brown, green, yellow and yellow-green - it is also possible to use it as a marking tape. Tesaflex 53988 is certified to all relevant standards and is easy to use. Ideal for applications in the electronic sector, e.g. insulation or marking of cablesCertified according to IEC 60454-3-1 (VDE, IMQ, SEMKO), VOC -certified, RoHS and REACH compliantThick backing material (150µm)High dielectric breakdown voltage (7.000V)Temperature resistant up to +90°C.Available in 9 different colors