14 products were found matching your search for isolate in 1 shops:

"Designed for quality crimping of 8P modular connectors and for securely connecting themCapacity: 8P8C (RJ45)Cuts, isolates, crimps and trims modular connectors quickly and efficiently - pass through Ratchet system with automatic quick release, which releases the pliers again when the correct pressure is reached to guarantee precision crimpingPrecision-machined jaws for qualitative crimping and secure connectionsMade of fully hardened carbon alloy steel for high strength and durabilityVery robust, up to 40,000 applications tested Ergonomic two-component handles for easy and comfortable workingTotal length: 190 mm"

JUMPFLEX® measuring transducerIsolating amplifier, permanently set for current signals or voltage signalsBrief description:The pre-configured isolating amplifiers convert analogue standard signals and amplify, filter and galvanically isolate the analogue standard signals from one another.The devices have a 3-way isolation with a test voltage of 2.5 kV. Isolating amplifier 857-411 isolates analogue current signals in the range of 0(4) ... 20 mA in the input to 0(4) ... 20 mA in the output.Isolating amplifier 857-412 isolates analogue voltage signals in the range of 0(2) ... 10 V in the input to 0(2) ... 10 V in the output. The supply voltage for the device, which can be bridged quickly and cost-effectively via side push-in type jumper bars, is 24 V DC. A green LED on the front of the device signals that it is in operation. The isolating amplifiers meet the requirements of safe isolation as per EN 61140 with a test voltage of 2.5 kV between input/output/supply.Dimensions (mm) W x H x D: 6 x 96 x 94 (height from the top edge of the mounting rail)Connection technology: CAGE CLAMP®SSingle-wire cross-sections: 0.08 mm² ... 2.5 mm²/AWG 28 ... 12Fine-stranded cross-sections: 0.34 mm² ... 2.5 mm²/AWG 22 ... 12Insulation stripping lengths 9 ... 10 mm/0.37 inInput signal: 0(4) ... 20 mA (857-411), 0(2) ... 10 V (857-412)Input resistance: 50 O, 100 kOOutput signal: 0(4) ... 20 mA (857-411), 0(2) ... 10 V (857-412)Apparent ohmic resistance: 600 O (857-411), 2 kO (857-412)Limit frequency: 100 HzTime setting (T10 - 90): Supply voltage: UN DC 24 VSupply voltage range: 16.8 V ... 31.2 VPower consumption at 24 V DC: Transmission error: Temperature coefficient: 0.01 %/KTest voltage (input/output/supply): 2.5 kV AC, 50 Hz, 1 min.Ambient temperature: -25°C ... +70°CStorage temperature: -40°C ... +85°C

JUMPFLEX® measuring transducerIsolating amplifier, permanently set for current signals or voltage signalsBrief description:The pre-configured isolating amplifiers convert analogue standard signals and amplify, filter and galvanically isolate the analogue standard signals from one another.The devices have a 3-way isolation with a test voltage of 2.5 kV. Isolating amplifier 857-411 isolates analogue current signals in the range of 0(4) ... 20 mA in the input to 0(4) ... 20 mA in the output.Isolating amplifier 857-412 isolates analogue voltage signals in the range of 0(2) ... 10 V in the input to 0(2) ... 10 V in the output. The supply voltage for the device, which can be bridged quickly and cost-effectively via side push-in type jumper bars, is 24 V DC. A green LED on the front of the device signals that it is in operation. The isolating amplifiers meet the requirements of safe isolation as per EN 61140 with a test voltage of 2.5 kV between input/output/supply.Dimensions (mm) W x H x D: 6 x 96 x 94 (height from the top edge of the mounting rail)Connection technology: CAGE CLAMP®SSingle-wire cross-sections: 0.08 mm² ... 2.5 mm²/AWG 28 ... 12Fine-stranded cross-sections: 0.34 mm² ... 2.5 mm²/AWG 22 ... 12Insulation stripping lengths 9 ... 10 mm/0.37 inInput signal: 0(4) ... 20 mA (857-411), 0(2) ... 10 V (857-412)Input resistance: 50 O, 100 kOOutput signal: 0(4) ... 20 mA (857-411), 0(2) ... 10 V (857-412)Apparent ohmic resistance: 600 O (857-411), 2 kO (857-412)Limit frequency: 100 HzTime setting (T10 - 90): Supply voltage: UN DC 24 VSupply voltage range: 16.8 V ... 31.2 VPower consumption at 24 V DC: Transmission error: Temperature coefficient: 0.01 %/KTest voltage (input/output/supply): 2.5 kV AC, 50 Hz, 1 min.Ambient temperature: -25°C ... +70°CStorage temperature: -40°C ... +85°C

JUMPFLEX® measuring transducerIsolating amplifier, configurable with zero/span adjustmentBrief description:The configurable isolating amplifier converts analogue standard signals and amplifies and galvanically isolates the analogue standard signals from one another. The device has a 3-way isolation with a test voltage of 2.5 kV. Using DIP switches accessible on the side, the following signals can be configured in the input and output:0 ... 10 V, 2 ... 10 V, 0 ... 20 mA, 4 ... 20 mA, 0 ... 5 V and 1 ... 5 V.The measurement ranges are switched in a calibrated form. The supply voltage for the device, which can be bridged quickly and cost-effectively via side push-in type jumper bars, is 24 V DC. A green LED on the front of the device signals that it is in operation. The isolating amplifier meets the requirements of safe isolation as per EN 61140 with a test voltage of 2.5 kV between input/output/supply.Dimensions (mm) W x H x D: 6 x 96 x 94 (height from the top edge of the mounting rail)Connection technology: CAGE CLAMP®SSingle-wire cross-sections: 0.08 mm² ... 2.5 mm²/AWG 28 ... 12Fine-stranded cross-sections: 0.34 mm² ... 2.5 mm²/AWG 22 ... 12Insulation stripping lengths 9 ... 10 mm/0.37 inConfiguration DIP switchesInput signal: 0 ... 20 mA, 4 ... 20 mA, 0... 5 V, 0 ... 10 V, 2 ... 10 V, 1 ... 5 V (switchable in a calibrated form)Input resistance: 50 O (I-input), 100 kO (U-input)Output signal: 0 ... 20 mA, 4 ... 20 mA, 0... 5 V, 0 ... 10 V, 2 ... 10 V, 1 ... 5 V (switchable in a calibrated form)Apparent ohmic resistance: 600 O (I-output) 2 kO (U-output)Limit frequency: 100 Hz/> 5 kHz (switchable via DIP switch)Time setting (T10 - 90): Zero/span adjustment: ± 3 %Supply voltage: UN DC 24 VSupply voltage range: 16.8 V ... 31.2 VPower consumption at 24 V DC: Transmission error: Temperature coefficient: 0.01 %/KTest voltage: (input/output/supply) 2.5 kV AC, 50 Hz, 1 min.Ambient temperature: -25°C ... +70°CStorage temperature: -40°C ... +85°C

"Nedis Digital Audio Converter 1-way connectors - input: DC Power / HDMI™ input connectors - output: 1x Coax Audio / 1x TosLink jack eARC Automatic AnthraciteThis digital audio converter from Nedis can be used to isolate the audio signal from an HDMI™ transmission. The audio signal can be transmitted to a sound system or amplifier via the optical Toslink or coaxial signal, while the video signal is displayed on a TV or monitor.This digital audio converter converts the latest high bit rate (192 kHz) audio formats such as Dolby Digital 5.1, DTS. for your home entertainment devices.Converts your HDMI™ eARC signal to optical Toslink or coaxial signal.Separate the HDMI™ audio signal and transmit it to your sound system or amplifierHigh bit rate audio formats (192 kHz), Dolby Digital 5.1, DTS."

"Nedis Digital Audio Converter 1-way Connectors - Input: HDMI™ Input Connectors - Output: 2x (2x RCA jack) / 3.5 mm eARC Automatic AnthraciteThis digital audio converter from Nedis can be used to isolate the audio signal from an HDMI™ transmission. The audio signal can be transmitted to a sound system or amplifier via the RCA and 3.5mm connectors while the video signal is displayed on a TV or monitor. This digital audio converter converts the latest audio formats at a high bit rate (192 kHz).Converts your HDMI™ eARC signal to an RCA + 3.5mm signalDisconnect the HDMI™ audio signal and transfer it to your sound system or amplifierHigh bit rate audio formats (192 kHz), DTS Master, DTS:X, Dolby TrueHD, Dolby Atmos."

Mounting bracket for easy to mount and compact installation of wall outlets in wall conduits to meet the maximum bending radii required for copper and fiber optic data cables. To isolate them from mains voltage-carrying parts, the brackets can also be supplied with plug-in separation cup. Horizontal T-slot fastening compatible with Tehalit, OBO/Bettermann, ASYCO and Alusor cable ducts.

Mounting bracket for easy to mount and compact installation of wall outlets in wall conduits to meet the maximum bending radii required for copper and fiber optic data cables. To isolate them from mains voltage-carrying parts, the brackets can also be supplied with plug-in separation cup. Horizontal T-slot fastening compatible with Tehalit, OBO/Bettermann, ASYCO and Alusor cable ducts.

Mounting bracket for easy to mount and compact installation of wall outlets in wall conduits to meet the maximum bending radii required for copper and fiber optic data cables. To isolate them from mains voltage-carrying parts, the brackets can also be supplied with plug-in separation cup. Horizontal T-slot fastening compatible with Tehalit, OBO/Bettermann, ASYCO and Alusor cable ducts.

Mounting bracket for easy to mount and compact installation of wall outlets in wall conduits to meet the maximum bending radii required for copper and fiber optic data cables. To isolate them from mains voltage-carrying parts, the brackets can also be supplied with plug-in separation cup. Horizontal T-slot fastening compatible with Tehalit, OBO/Bettermann, ASYCO and Alusor cable ducts.

"Isolation and protection of USB connectionsThis USB protection isolates the electrical connection between the host PC and USB device.In audio technology, this is known as ground lift. In measurement technology, it is known as galvanic isolation.Cross-currents and interference are eliminated, faults are reduced and precise data transmission is ensured.Isolation voltage (1 min): 2000 V DC/500 V ACUSB specification: USB 1.1 Full-Speed (12 Mbps), USB 2.0 Hi-Speed (480 Mbps), USB 3.0 SuperSpeed (5 Gbps)Maximum output current: 710 mA, Hi-Speed, 660 mA, SuperSpeedAll ISO-UXX devices have a robust aluminium housing. Rubber seals ensure a secure footing.The ISO UXX devices do not contain any serviceable parts.They can be operated in environments with temperatures between -40°C and +40°C. No drivers or special software are required.ISO-UXX devices are not certified for medical use."

"Safety: DIN EN 60601-1 (Medical electrical equipment)EMC: DIN EN 60601-1-2 (Medical electrical equipment)The Network Isolator MI 2005 provides a flexible and easy way to immediately galvanically isolate the network interface between devices.In less than 5 seconds, users, inventory and third parties are protected from dangerous leakage currents that can flow through the data network. The MI 2005 network isolator reliably prevents potential equalization currents and protects against overvoltages that can occur due to installation errors, environmental influences such as lightning or moisture, inrush currents or electrostatic discharges. In addition, the 5 kV RJ-45 network isolator provides outstanding attenuation and operates at a distance of 100m with virtually no loss in the data network. This allows the use of multiple MI 2005 network isolators in a network without a noticeable degradation in data performance.Fully compatible with IEEE802.3bz requirementsEasy to use - no installation requiredCompact and universalIn less than 5 seconds, patient, user and inventory are protected from leakage currentsNo fixed cables - defective network ca- bel does not require a new isolatorLightweight and durable housing - for any system with a network connectionInexpensive to purchase and efficient to operate - does not require its own power supplyData throughput10/100/1000/2500 MbpsDielectric strength signal and shielding5000 V 50/60 Hz over 1 min.ComplianceIEEE 802.3Package Contents:Instruction manualStandards testsIEC 60601-1 Edition 3.2IEC 60601-1-2"

DescriptionThe MOC3051M and MOC3052M consist of a GaAs infrared emitting diode optically coupled to a non-zerocrossing silicon bilateral AC switch (triac). These devices isolate low voltage logic from 115 VAC and 240 VAC lines to provide random phase control of high current triacs or thyristors. These devices feature greatly enhanced static dv/dt capability to ensure stable switching performance of inductive loads.Applications• solenoid/Valve Controls• lamp Ballasts• static AC Power Switch• interfacing Microprocessors to 115 VAC and 240 VAC Peripherals• solid State Relay• incandescent Lamp Dimmers• temperature Controls• motor ControlsFeatures• excellent IFT Stability—IR Emitting Diode Has Low Degradation• 600 V Peak Blocking Voltage• Safety and Regulatory Approvals – UL1577, 4,170 VACRMS for 1 Minute – DIN EN/IEC60747-5-5

"Isolation and protection of USB connectionsThis USB protection isolates the electrical connection between the host PC and USB device.In audio technology, this is known as ground lift. In measurement technology, it is known as galvanic isolation.Cross-currents and interference are eliminated, faults are reduced and precise data transmission is ensured.Isolation voltage (1 min): 2000 V DC/500 V ACUSB specification: USB 1.1 Full-Speed (12 Mbps), USB 2.0 Hi-Speed (480 Mbps)Maximum output current: 340 mA, Hi-SpeedOperating informationAll ISO-UXX devices have a robust aluminium housing. Rubber seals ensure a secure footing.The ISO UXX devices do not contain any serviceable parts.They can be operated in environments with temperatures between -40°C and +40°C. No drivers or special software are required.ISO-UXX devices are not certified for medical use."