567 products were found matching your search for murata in 1 shops:

Murata DC/DC-Converter MEA-series, 1W.Input Voltage Range: 10,8 - 13,2 V DCOutput Voltage: ± 5,0 V DCOutput Current: ± 0,1 ATotal Output Power: 1 WEfficiency: 85%Features:• UL 94V-0 package material• high efficiency• No heatsink required• Operating temperature range -40ºC to 85ºC• Iindustry standard pinout• 1kVDC isolation

"Externally operated piezoelectric sounders are used in digital watches, electronic calculators, telephones and other devices. They are driven by a signal (e.g. 2048 Hz or 4096 Hz) from an LSI and produce a melodious sound.Main featuresLow power consumptionNo noise and high reliabilityTechnical featuresOscillating circuits not installedSize f22.0x8.2 mmFrequency: 4.0kHzSound pressure level 87 dB (typ.)Sound pressure level 75 dB (min.)Sound pressure level measurement condition [±1.5Vo-p,4.0kHz, square wave,10cm]Capacitance 12nFCapacitance tolerance ±30%Measuring condition for the capacitance [1kHz]Maximum input voltage ±15.0Vo-p max.Operating temperature range -20? to 70?Storage temperature range -30? to 80?Cable shapeCable shape pin typeCable length Cable length: 6.5 mmDrive type External drive"

Murata DC/DC-Converter MEA-series, 1W.Input Voltage Range: 21,6 - 26,4 V DCOutput Voltage: ± 12,0 V DCOutput Current: ± 0,042 ATotal Output Power: 1 WEfficiency: 87,%Features:• UL 94V-0 package material• high efficiency• No heatsink required• Operating temperature range -40ºC to 85ºC• Iindustry standard pinout• 1kVDC isolation

Murata DC/DC converter, NMD series, 1 W.Input voltage range: 4.5 - 5.5 V DCOutput voltage: 5 V DCOutput current: 0.1 AOutput rating: 1 WEfficiency: 70%Features:• UL 94V-0 enclosure• High efficiency up to 80% • I/O isolation 1000 VDC mA • No heat sink required• SMD design

• Epoxy resin coating

The CRE1 series is a low cost 1 W DC/DC converter series in enclosures and with an industry standard pin assignment. Common input and output voltages are available. Thanks to the galvanic isolation, the device can be configured in such a way thatit provides an insulated negative rail in systems which only have positive rails. The wide temperature range ensures starting at -40°C and a full output power of 1 W at 85°C.

The NME1 series of DC/DC converters are ideal for separating and/or converting DC busbars. Galvanic isolation allows the device to be configured to provide an insulated negative rail in systems where only positive rails are present. The large temperature range ensures operation from +40°C to 115°C. For information on reducing the output ripple, see the corresponding section.

NME SeriesIsolated 1W Single Output DC-DC ConvertersDescription:The NME series of DC-DC Converters is particularly suited to isolating and/or converting DC power rails. The galvanic isolation allows the device to be configured to provide an isolated negative rail in systems where only positive rails exist. The wide temperature range guarantees startup from –40°C and full 1 watt output at 85°C2. For lower ripple, refer to output ripple reduction section. The NME series offers short circuit protection options (PC) across the operating temperature range. Short circuits of less than 1O cause the converter to enter a 'foldback' limiting mode such that the input current is approximately 95mA for 0505 variant. Protection is continuous and auto-resetting on removal of the short circuit.Features:• Short circuit protection options• UL 60950 recognised• Single isolated output• 1kVDC isolation 'Hi Pot Test'• Wide temperature performance at full 1 watt load, –40°C to 85°C• Industry standard pinout• 5V, 12V, 15V & 24V input• 5V, 9V, 12V and 15V output• Fully encapsulated with toroidal magnetics• No external components required• Pin compatible with CME, CRE1, CRL2, LME, MEE1, MEE3, NKE & NML

Murata DC/DC converter, MEA series, 1 WInput voltage range: 4.5 - 5.5 V DCOutput voltage: ±9.0 V DCOutput current: ±0.056 AOutput rating: 1 WEfficiency: 86.5%Features:• UL 94V-0 enclosure• High efficiency• No heat sink required• Wide temperature range: -40°C to 85°C• Pinout to industrial standard• I/O insulation 1000 V DC

Murata DC/DC converter, MEA series, 1 WInput voltage range: 21.6 - 26.4 V DCOutput voltage: ±9.0 V DCOutput current: ±0.056 AOutput rating: 1 WEfficiency: 87.5%Features:• UL 94V-0 enclosure• High efficiency• No heat sink required• Wide temperature range: -40°C to 85°C• Pinout to industrial standard• I/O insulation 1000 V DC

Murata DC/DC converter, MEA series, 1 WInput voltage range: 13.5 - 16.5 V DCOutput voltage: ±9.0 V DCOutput current: ±0.056 AOutput rating: 1 WEfficiency: 87%Features:• UL 94V-0 enclosure• High efficiency• No heat sink required• Wide temperature range: -40°C to 85°C• Pinout to industrial standard• I/O insulation 1000 V DC

Isolated 2W Dual Output DC/DC ConvertersDescriptionThe NMH series of industrial temperature range DC/DC converters are the standard buliding blocks for on-board point-of-use power systems. They are ideally suited for providing dual rail supplies on single rail boards with the added benefit of galvanic isolation to reduce circuit noise. All of the rated power may be drawn from a single pin provided the total load does not exceed 2 watts. Pin compatibility with the NMA 1 watt series ensures minimal effort in upgrading distributed power systems.Features:• Efficiency up to 86%• Wide temperature performance at full 2 watt load, –40°C to 85°C• Dual output from a single input rail• Industry standard pinout• Power sharing on output• 1kVDC isolation 'Hi Pot Test'• 5V, 12V, 24V & 48V input• 5V, 9V, 12V and 15V output• Internal SMD construction• No external components required• MTTF up to 1.5 million hours• No electrolytic or tantalum capacitors• Pin compatible with MEA1 series

Murata DC/DC converter, NMV series, 1 W.Input voltage range: 4.5 - 5.5 V DCOutput voltage: ±15 V DCOutput current: ± 0.033 AOutput rating: 1 WEfficiency: 79%Features:• UL 94V-0 enclosure• High efficiency up to 79%• Adjustable temperature range: -40°C to 85°C• I/O isolation 3000 VDC mA • No heat sink required• SMD design• Pinout to industrial standard

Murata DC/DC converter, NMV series, 1 W.Input voltage range: 10.8 - 13.2 V DCOutput voltage: ±15 V DCOutput current: ± 0.033 AOutput rating: 1 WEfficiency: 76%Features:• UL 94V-0 enclosure• High efficiency up to 79%• Adjustable temperature range: -40°C to 85°C• I/O isolation 3000 VDC mA • No heat sink required• SMD design• Pinout to industrial standard

Murata DC/DC converter, MEA series, 1 WInput voltage range: 43.2 - 52.8 V DCOutput voltage: ±15.0 V DCOutput current: ±0.033 AOutput rating: 1 WEfficiency: 83.5%Features:• UL 94V-0 enclosure• High efficiency• No heat sink required• Wide temperature range: -40°C to 85°C• Pinout to industrial standard• I/O insulation 1000 V DC

Murata DC/DC converter, MEA series, 1 WInput voltage range: 4.5 - 5.5 V DCOutput voltage: ±12.0 V DCOutput current: ±0.033 AOutput rating: 1 WEfficiency: 87%Features:• UL 94V-0 enclosure• High efficiency• No heat sink required• Wide temperature range: -40°C to 85°C• Pinout to industrial standard• I/O insulation 1000 V DC

Murata DC/DC converter, MEA series, 1 WInput voltage range: 10.8 - 13.2 V DCOutput voltage: ±15.0 V DCOutput current: ±0.033 AOutput rating: 1 WEfficiency: 88%Features:• UL 94V-0 enclosure• High efficiency• No heat sink required• Wide temperature range: -40°C to 85°C• Pinout to industrial standard• I/O insulation 1000 V DC

Murata DC/DC converter, NMA series, 1 W.Input voltage range: 4.5 - 5.5 V DCOutput voltage: ±15 V DCOutput current: ± 0.033 AOutput rating: 1 WEfficiency: 78%Features:• UL 94V-0 enclosure• High efficiency • Adjustable temperature range: -40°C to 85°C• I/O isolation 1000 VDC mA • No heat sink required• Pinout to industrial standard• SMD design

Murata DC/DC converter, MEA series, 1 WInput voltage range: 21.6 - 26.4 V DCOutput voltage: ±5.0 V DCOutput current: ±0.1 AOutput rating: 1 WEfficiency: 84.5%Features:• UL 94V-0 enclosure• High efficiency• No heat sink required• Wide temperature range: -40°C to 85°C• Pinout to industrial standard• I/O insulation 1000 V DC

Murata DC/DC converter, NMA series, 1 W.Input voltage range: 10.8 - 13.2 V DCOutput voltage: ±5 V DCOutput current: ± 0.1 AOutput rating: 1 WEfficiency: 69%Features:• UL 94V-0 enclosure• High efficiency • Adjustable temperature range: -40°C to 85°C• I/O isolation 1000 VDC mA • No heat sink required• Pinout to industrial standard• SMD design