293 products were found matching your search for shank in 1 shops:

Cushion Grip handle allows for greater torque and comfort. Integral flanges inside handle provide solid, twist resistant blade anchor. Special heat treated shafts. Precision machined tip for exact fit. Premium chrome plated for smooth feel and corrosion resistance. Patented Tip Ident quickly identifies the type of screwdriver and screwdriver tip orientation. Meets or exceeds applicable ASME / ANSI specifications. No. 2 Phillips with 4 In. shank.

Mounting shankFor 68/68S/68W/80/80S/80W drill bitsM16 external thread with holes for centre drill.Driven by SDS Plus shankDrill Ø 9 mm(Does not include drill bit)

Mounting shankFor 68/68S/68W/80/80S/80W drill bitsM16 external thread with holes for centre drill.Driven by hex shank, WAF 12 mm.

SDS-plus clamping tool for HSS bimetalHole saw with guide drill.For Ø 32-125 mm.

Aggressive brush. Suitable for medium-duty brushing tasks such as deburring, cleaning, rust removal, descaling and removing weld spatter. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Number of knots: 6 piecesPackaging: POS packagingPFERD TOOLS type: POS PBG 1919/6 ST 0.35 (1)Max. RPM: 20,000 RPMOpt. RPM from: 10,000 RPMOpt. RPM to: 15,000 RPMMounting system: shankCup dia.: 19 mmFilament material dia.: 0.35 mmOutside dia. metric 19 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Filament length: 28 mmTotal length: 68 mm

Suitable for light brushing work such as deburring, cleaning and rust removal. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Packaging: POS packagingPFERD TOOLS type: POS PBU 1516/6 ST 0.35 (1)Max. RPM: 18,000 RPMOpt. RPM from: 9000 RPMOpt. RPM to: 13,500 RPMMounting system: shankCup dia.: 16 mmFilament material dia.: 0.35 mmOutside dia. metric 15 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Filament length: 22 mmTotal length: 65 mmAdvantages:Optimal access to hard-to-reach places such as bores and cavities as the filament spreads during rotation.Long service life due to the use of PFERD TOOLS special wire.Creates fine surfaces.

Particularly flexible single-twist brush for special tasks. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Number of knots: 1 piecePackaging: industrial packagingMax. RPM: 10,000 RPMOpt. RPM from: 5000 RPMOpt. RPM to: 7500 RPMMounting system: shankCup dia.: 10 mmFilament material dia.: 0.35 mmOutside dia. metric: 10 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Filament length: 25 mmTotal length: 65 mmAdvantages:Optimal access to hard-to-reach places such as inside corners, as the knot does not unravel.Long service life due to the use of PFERD TOOLS special wire.Recommendations for use:Observe the recommended speeds.For optimum results, use on variable-speed tool drives.For best performance, use a tool drive with at least 300 watts.

Universally applicable for cleaning, rust removal and smoothing, as well as removal of corrosion and varnishes. Due to face-down use with the entire brush surface, it is particularly suitable for brushing tasks on large, flat and easily accessible surfaces. Cup brush with plastic-coated brush body. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Max. RPM: 10,500 RPMOpt. RPM from: 5300 RPMOpt. RPM to: 7900 RPMWidth metric: 10 mmMounting system: shankFilament material dia: 0.3 mmOutside metric dia: 50 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Grain size: not specifiedFilament length: 20 mmTotal length: 75 mm

Works on most combination head receptacle, switch and panel screws.Tip-Ident® color-coded handle end quickly identifies the screwdriver type and tip orientation.Special heat-treated, chrome plated shaft for corrosion resistance.Cushion-Grip handle for greater torque and comfort.Internal flanges inside handle provide solid, twist-resistant blade anchor.Precision-machined tip for exact fit.Meets or exceeds applicable ASME / ANSI specifications.

Universally applicable for cleaning, rust removal, smoothing, cleaning of weld seams, light deburring and removal of corrosion and varnishes. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Packaging: POS packagingMax. RPM: 15,000 RPMOpt. RPM from: 7500 RPMOpt. RPM to: 11,300 RPMWidth metric: 15 mmMounting system: shankFilament material dia.: 0.3 mmOutside dia. metric: 70 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Grain size: not specifiedFilament length: 19 mmTotal length: 50 mmAdvantages:Optimal adaptation to the contour of the workpieces due to high flexibility.Long service life due to the use of PFERD TOOLS special wire.Creates fine surfaces.

Universally applicable for cleaning, rust removal, smoothing, cleaning of weld seams, light deburring and removal of corrosion and varnishes. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Packaging: POS packagingMax. RPM: 12,000 RPMOpt. RPM from: 6000 RPMOpt. RPM to: 9000 RPMWidth metric: 10 mmMounting system: shankFilament material dia.: 0.3 mmOutside dia. metric: 100 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Grain size: not specifiedFilament length: 25 mmTotal length: 50 mmAdvantages:Optimal adaptation to the contour of the workpieces due to high flexibility.

Universally applicable for cleaning, rust removal and smoothing, as well as removal of corrosion and varnishes. Due to face-down use with the entire brush surface, it is particularly suitable for brushing tasks on large, flat and easily accessible surfaces. Cup brush with plastic-coated brush body. Silicon carbide (SiC) brushes are particularly suitable for deburring and surface improvement. Plastic trim withstands temperatures up to 220°C.Technical data:Max. RPM: 10,500 RPMOpt. RPM from: 4200 RPMOpt. RPM to: 6800 RPMWidth metric: 10 mmMounting system: shankFilament material dia.: 0.9 mmOutside metric dia.: 50 mmShank dia. metric: 6 mmFilament material: silicon carbide (SiC)Grain size: 180Filament length: 20 mmTotal length: 75 mmAdvantages:Optimal adaptation to the contour of the workpieces due to high flexibility.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as the tip.Recommendations for use:Observe the recommended speeds.Use coolant for high heat applications.For best performance, use a tool drive with at least 300 watts.

Universally applicable for cleaning, rust removal, smoothing, cleaning of weld seams, light deburring and removal of corrosion and varnishes. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Packaging: POS packagingMax. RPM: 15,000 RPMOpt. RPM from: 7500 RPMOpt. RPM to: 11,300 RPMWidth metric: 15 mmMounting system: shankFilament material dia.: 0.2 mmOutside dia. metric: 50 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Grain size: not specifiedFilament length: 13 mmTotal length: 50 mm

Aggressive brush for cleaning, rust removal and weld seam processing. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Number of knots: 18 piecesPackaging: POS packagingMax. RPM: 25,000Opt. RPM from: 12,500 RPMOpt. RPM to: 18,800 RPMWidth metric: 6 mmMounting system: shankFilament material dia.: 0.5 mmOutside dia. metric: 76 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Filament length: 16 mmTotal length: 42 mmAdvantages:Optimal access to hard-to-reach areas such as grooves and recesses.Aggressive brushing effect due to high rigidity of the wire twists.Long service life due to the use of PFERD TOOLS special wire.

Suitable for light brushing work such as deburring, cleaning and rust removal. Steel wire is the most common filament material. Brushes with steel wire filament material are particularly suitable for surface processing and deburring. PFERD TOOLS special wire has a high tensile and bending fatigue strength. This ensures optimum wear of the wire and a long service life, even for extreme brushing applications. Steel wire withstands temperatures up to 300°C.Technical data:Packaging: industrial packagingPFERD TOOLS type: PBU 2022/6 ST 0,50 (1)Max. RPM: 18,000 RPMOpt. RPM from: 9000 RPMOpt. RPM to: 13,500 RPMMounting system: shankCup dia.: 22 mmFilament material dia.: 0.5 mmOutside dia. metric 20 mmShank dia. metric: 6 mmFilament material: steel wire (ST)Filament length: 25 mmTotal length: 70 mmAdvantages:Optimal access to hard-to-reach places such as bores and cavities as the filament spreads during rotation.Long service life due to the use of PFERD TOOLS special wire.Creates fine surfaces.

Universally applicable for cleaning, rust removal, smoothing, cleaning of weld seams, light deburring and removal of corrosion and varnishes. Silicon carbide (SiC) brushes are particularly suitable for deburring and surface improvement. Plastic filaments withstand temperatures up to 220°C.Technical data:Packaging: POS packagingMax. RPM: 15,000 RPMOpt. RPM from: 6000 RPMOpt. RPM to: 9800 RPMWidth metric: 15 mmMounting system: shankFilament material dia.: 0.9 mmOutside dia. metric: 70 mmShank dia. metric: 6 mmFilament material: silicon carbide (SiC)Grain size: 180Filament length: 19 mmTotal length: 50 mmAdvantages:Optimal adaptation to the contour of the workpieces due to high flexibility.Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as the tip.

Universally applicable for cleaning, rust removal, smoothing, cleaning of weld seams, light deburring and removal of corrosion and varnishes. Silicon carbide (SiC) brushes are particularly suitable for deburring and surface improvement. Plastic filament withstands temperatures up to 220°C.Technical data:Packaging: POS packagingMax. RPM: 15,000 RPMOpt. RPM from: 6000 RPMOpt. RPM to: 9800 RPMWidth metric: 15 mmMounting system: shankFilament material dia.: 0.9 mmOutside dia. metric: 50 mmShank dia. metric: 6 mmFilament material: silicon carbide (SiC)Grain size: 180Filament length: 13 mmTotal length: 50 mm

Aggressive brush. Suitable for medium-duty brushing tasks such as deburring, cleaning, rust removal, descaling and removing weld spatter. End brush with plastic-coated brush body. To meet the special requirements when machining stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience gained from the industrial environment confirms that it offers very good corrosion resistance with an optimal service life. All PFERD TOOLS brushes with INOX filament are marked blue and suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic during cold hardening, meaning it is attracted to magnets.

Suitable for light brushing work such as deburring, cleaning and rust removal. End brush with plastic-coated brush body. To meet the special requirements when machining stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience gained from the industrial environment confirms that it offers very good corrosion resistance with an optimal service life. All PFERD TOOLS brushes with INOX filament are marked blue and suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic during cold hardening, meaning it is attracted to magnets.This is caused by a structural change caused by deformation, e.g. during wire drawing. This does not affect the quality and corrosion resistance of the INOX filament. It retains its corrosion-resistant properties. Stainless steel wire (INOX) withstands temperatures up to 450°C.

Universally applicable for cleaning, rust removal and smoothing, as well as removal of corrosion and varnishes. Due to face-down use with the entire brush surface, it is particularly suitable for brushing tasks on large, flat and easily accessible surfaces. To meet the special requirements when machining stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience gained from the industrial environment confirms that it offers very good corrosion resistance with an optimal service life. All PFERD TOOLS brushes with INOX filament are marked blue and suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic during cold hardening, meaning it is attracted to magnets.This is caused by a structural change caused by deformation, e.g. during wire drawing. This does not affect the quality and corrosion resistance of the INOX filament. It retains its corrosion-resistant properties. Stainless steel wire (INOX) withstands temperatures up to 450°C. Cup brush with plastic-coated brush body.