Znaleziono 2 produkty pasujące do Twojego wyszukiwania: stetsom w sklepach 6:

The IR 160.2 RCA from Stetsom is a 2-Channel Amplifier that comes in a compact mini form factor. This full-range amplifier stands out with high efficiency, low power consumption, and reduced heat generation. With 2x80W RMS output power at 2 Ohm, it provides an impressive sound experience in the car. The innovative IR-Line showcases Stetsom's advanced amplifier technology. A special feature is the RCA input, which guarantees safe control of the speakers. The Class D amplifier also impresses with low harmonic distortion and is optimized for 2 and 4 Ohm connections. Features With the IR-Line, Stetsom demonstrates its expertise and progress in amplifier technology! The IR Line is characterized by ultra-small amplifiers beyond the 100W power class! And now the RCA version LPF with variable cutoff frequency (40Hz ~ 100 Hz) Stetsom Iron Line IR 160.2 RCA with 2x80W RMS at 2 Ohm Class D amplifier module If power in car audio is all you want, then the Stetsom amplifier module is here to prove that size is not an argument. Finally, while the Iron Line IR 160.2 amplifier is compact, it delivers the efficiency you expect from a top-tier amplifier. With RCA input, the major distinguishing feature of this model, the Stetsom sound module operates with a channel of 80 W RMS, allowing for safer speaker activation. It is possible to adjust the lower cutoff frequency and the level control. The amplifier is characterized by very low harmonic distortion. Specifications 2-Channel Amplifier, optimized for 2 and 4 Ohm connections! RMS power at 2 Ohm: 13.8V 2 x 80W RMS RMS power at 4 Ohm: 13.8V 2 x 45W RMS Supply voltage: 9.5 ~ 15V Frequency response: 35Hz ~ 20KHz Signal-to-noise ratio: > 90 dB Harmonic distortion: > 0.03% THD Input sensitivity: 2V Input impedance: 2.4K Ohm Output impedance: 2 Ohm Consumption with music signal: 6.4 A Consumption with bass signal: 12.8 A Dimensions (H x W x D) mm: 29 x 58 x 77 Weight: 0.115 kg

Discover the 4-Channel Amplifier HL 2000.4–2OHM from Stetsom, designed specifically for impressive performance at two Ohms. This amplifier offers outstanding features, including independent front and rear channels as well as an adjustable level function. The integrated Crossover allows for the choice between low-pass, high-pass, and full-range outputs. Thanks to digital amplifier technology, the HL 2000.4–2OHM provides full-range playback from 19 Hz to 26 KHz. Ideal for precise sound control, this amplifier combines both power and control in a compact design. With an RMS power of up to 4 x 580W at 2 Ohm and flexible connection options, your audio experience is elevated to a new level. The Stetsom HL 2000.4–2OHM is a 4-Channel Amplifier full-range amplifier, optimized for use at two Ohm. This is how the 4 amplifier series from Stetsom differ:  The Stetsom HL amplifiers are extremely powerful full-range amplifiers, optimized for use with mids and highs. The Stetsom DB series includes amplifiers that are exclusively designed for the bass range.  The Stetsom EX line is a full-range amplifier series and can be used for both bass and front systems up to high frequencies.  The Stetsom Vulcan amplifier series is suitable for the bass range up to the mid-range!  Features: The HL1200.4 and HL2000.4 have 4 channels, divided into a front (FRONT) and a rear (REAR) channel, with independent Level: Adjusts the level of the input signal Crossover: Allows the choice between low-pass, high-pass, or flat (full-range) outputs. DIGITAL amplifier and full-range playback from 19 Hz to 26 KHz. Specifications: 4-Channel Amplifier, optimized for connecting speakers with a total of 2 or 4 Ohm. RMS power at 2 Ohm 12.6V: 4 x 500W RMS (STEREO) RMS power at 4 Ohm 12.6V: 4 x 290W RMS (STEREO) RMS power at 2 Ohm 13.8V: 4 x 580W RMS (STEREO) RMS power at 4 Ohm 13.8V: 4 x 364W RMS (STEREO) Power @ 12.6V Bridge 4 Ohm: 2 x 1000W RMS Power @ 13.8V Bridge 4 Ohm: 2 x 1160W RMS Supply voltage: 9 ~ 15V Frequency range: 19Hz ~ 26KHz Crossover low-pass: 90 Hz Crossover high-pass: 90 Hz Signal-to-noise ratio: > 90 dB Harmonic distortion: > 0.4 % THD Input sensitivity: 0.2V Input impedance: 15K OHMS Output impedance: 2 OHMS (STEREO) / 4 OHMS (BRIDGE) Current consumption with music signal: 96A Current consumption with bass signal: 192A Dimensions (H x W x D) mm: 66 x 206 x 241 mm Weight Kg: 2.23 Kg

The Bravo HQ 800.4 from Stetsom is a 4-Channel Amplifier specifically designed for car audio enthusiasts. It offers maximum power with 4 x 250 Watts RMS @ 2 Ohm at 14.4 V and features a wide frequency range from 5 Hz to 22 kHz. You can use it flexibly, as it is compatible with subwoofers, woofers, compression drivers, and tweeters. The amplifier also has a good signal-to-noise ratio of > 80 dB and variable high-pass and low-pass filters. With an operating voltage of 9 V to 17 V DC, it adapts flexibly to different conditions. Highlights & Concept: Maximum Performance: The BRAVO FULL line was specifically designed for car audio enthusiasts seeking maximum power and quality. Versatile: Thanks to the wide frequency response, the amplifier offers high sound quality and definition, making it flexible for use with subwoofers, mid-bass drivers (woofers), compression drivers, and tweeters. Power & Performance: Channels: 4 Channels. Output Power at 12.6 V: 4 x 200 Watts RMS @ 2 Ohm 4 x 130 Watts RMS @ 4 Ohm Bridged (Bridge): 2 x 400 Watts RMS @ 4 Ohm Output Power at 14.4 V: 4 x 250 Watts RMS @ 2 Ohm 4 x 170 Watts RMS @ 4 Ohm Frequency Range: 5 Hz – 22 kHz. Signal-to-Noise Ratio (S/N): > 80 dB. Filters & Audio Settings: Crossover High Pass (HPF): 50 Hz – 2.3 kHz (variable). Crossover Low Pass (LPF): 50 Hz – 2.3 kHz (variable). Input Sensitivity: RCA: 250 mV / High Level (HIGH): 1.5 V. Input Impedance: RCA: 18 kOhm / High Level (HIGH): 1 kOhm. Power Supply & Consumption: Operating Voltage: 9 V – 17 V DC. Current Draw (Music Signal): 43 A. Current Draw (Bass Signal): 86 A. Dimensions & Weight: Width: 167 mm Length: 235.5 mm Height: 58.5 mm

The HL 1200.4–2OHM from Stetsom is a 4-Channel Amplifier that offers powerful and high-quality sound. Specifically optimized for use at two Ohm, this amplifier belongs to Stetsom's powerful HL series, which excels particularly in the mid and high frequency ranges. With individually adjustable levels and selectable low-pass, high-pass, or full-range settings, the amplifier provides an impressive sound experience. The RMS power varies depending on supply voltage and impedance, from 4 x 165W at 4 Ohm to 4 x 320W at 2 Ohm. A wide frequency range of 10Hz to 26 KHz and low harmonic distortion of under 0.9% THD complete the technical specifications. The Stetsom HL 1200.4–1OHM is a 4-Channel Amplifier full-range amplifier, optimized for use at one Ohm. This is how the 4 amplifier series from Stetsom differ: The Stetsom HL amplifiers are extremely powerful full-range amplifiers, optimized for use in mid and high frequencies. The Stetsom DB series includes amplifiers that are exclusively designed for the bass range. The Stetsom EX line is a full-range amplifier series and can be used for both bass and front systems up to high frequencies. The Stetsom Vulcan amplifier series is suitable for the bass range up to the mid-range! Features: The HL1200.4 and HL2000.4 have 4 channels, divided into a front (FRONT) and a rear (REAR) channel, with independent Level: Adjusts the level of the input signal Crossover: Allows the choice between low-pass, high-pass, or flat (full-range) outputs. Data: 4-Channel Amplifier, optimized for connecting speakers with a total of 1 or 2 Ohm. RMS power at 1 Ohm 12.6V: 4 x 300W RMS RMS power at 2 Ohm 12.6V: 4 x 200W RMS RMS power at 1 Ohm 13.8V: 4 x 350W RMS RMS power at 2 Ohm 13.8V: 4 x 250W RMS Power @ 12.6V bridge 2 Ohm: 2 x 600W RMS Power @ 13.8V bridge 2 Ohm: 2 x 700W RMS Supply voltage: 9 ~ 15V Frequency range: 10Hz ~ 26 KHz Low-pass crossover: 90 Hz High-pass crossover: 90 Hz Signal-to-noise ratio: > 90 dB Harmonic distortion: <0.9% Input sensitivity: 0.2 V Input impedance: 14K Ohm Output impedance: 1 OHM Consumption with music signal: 57 A Consumption with bass signal: 114 A Dimensions (H x W x D) mm: 66 x 206 x 216 mm Weight Kg: 1.94 Kg

The HL 1200.4–2OHM from Stetsom is a 4-Channel Amplifier optimized for operation at two Ohms. As part of the renowned HL series, this amplifier impresses with its extreme performance, especially in the mid and high frequency range. With individually adjustable levels, a Crossover for low-pass, high-pass, or full-range outputs, and a wide frequency range, the HL 1200.4–2OHM offers a versatile sound experience. It delivers an RMS power of up to 320W at 2 Ohm and is designed to support clear and powerful sound. Its compact design and lightweight make it an ideal choice for demanding audio installations. Features The HL1200.4 and HL2000.4 have 4 channels, divided into a front (FRONT) and a rear (REAR) channel, with independent Level: Adjusts the input signal level Crossover: Allows the choice between low-pass, high-pass, or flat (full-range) outputs. Specifications 4-Channel Amplifier, optimized for connecting speakers with a total of 2 or 4 Ohm. RMS power at 2 Ohm 12.6V: 4 x 300W RMS RMS power at 4 Ohm 12.6V: 4 x 165W RMS RMS power at 2 Ohm 13.8V: 4 x 320W RMS RMS power at 4 Ohm 13.8V: 4 x 170W RMS Power @ 12.6V Bridge 4 Ohm: 2 x 600W RMS Supply voltage: 9 ~ 15V Frequency range: 10Hz ~ 26 KHz Low-pass filter: 90 Hz High-pass Crossover: 90 Hz Signal-to-noise ratio: > 90 dB Harmonic distortion: <0.9% THD Input sensitivity: 0.2 V Input impedance: 14K Ohm Output impedance: 2 Ohm Consumption with music signal: 53 A Consumption with bass signal: 106 A Dimensions (H x W x D) mm: 66 x 206 x 216 Weight Kg: 1.95 Kg This is how the 4 amplifier series from Stetsom differ The Stetsom HL amplifiers are extremely powerful full-range amplifiers, optimized for use in mid and high frequencies. The Stetsom DB series includes amplifiers designed exclusively for the bass range. The Stetsom EX line is a full-range amplifier series and can be used for both bass and front systems up to high frequencies. The Stetsom Vulcan amplifier series is suitable for the bass range up to the mid-range!

The Bravo HQ 400.4 from Stetsom is a 4-Channel Amplifier that impresses with a total power of 400 Watts RMS. It offers four channels with different power specifications at 12.6 V and 14.4 V, making it flexible for stereo and bridged operation. With a frequency range of 5 Hz to 30 kHz and a signal-to-noise ratio of over 90 dB, it delivers clear and powerful sound experiences. The amplifier is also equipped with variable high and low pass filters as well as adjustable input sensitivity. It operates with a voltage of 9 to 15.5 V DC, with a current draw of 17 A for music signals and 34 A for bass signals. Its compact design with dimensions of 127 x 167 x 58.5 mm and a weight of 640 g allows for easy integration. Power & Performance: Channels: 4 Channels. Total Power: 400 Watts RMS. Output Power at 12.6 V: 4 x 85 Watts RMS @ 2 Ohm (Stereo). 4 x 50 Watts RMS @ 4 Ohm (Stereo). 2 x 170 Watts RMS @ 4 Ohm bridged (Bridge). Output Power at 14.4 V: 4 x 105 Watts RMS @ 2 Ohm (Stereo). 4 x 60 Watts RMS @ 4 Ohm (Stereo). 2 x 210 Watts RMS @ 4 Ohm bridged (Bridge). Frequency Range: 5 Hz – 30 kHz. Signal-to-Noise Ratio (S/N): > 90 dB. Total Harmonic Distortion (THD): < 1 %. Filters & Audio Settings: Crossover High Pass (HPF): 50 Hz – 2.3 kHz (variable). Crossover Low Pass (LPF): 50 Hz – 2.3 kHz (variable). Input Sensitivity: RCA: 200 mV – 8.0 V / High Level (HIGH): 1.5 V. Input Impedance: RCA: 15 kOhm / High Level (HIGH): 1 kOhm. Output Impedance: 2 Ohm (Stereo). Power Supply & Consumption: Operating Voltage: 9 V – 15.5 V DC. Current Draw (Music Signal): 17 A. Current Draw (Bass Signal): 34 A. Dimensions & Weight: Width (W): 127 mm. Length (D): 167 mm. Height (H): 58.5 mm. Weight: 640 g.

The HL 2000.4–1OHM from Stetsom is a versatile 4-Channel Amplifier, ideal for adapting to speakers with 1 Ohm. This model offers separate FRONT and REAR channels with independent level control and a flexible Crossover between low-pass, high-pass, and full-range. The digital full-range amplifier enables clear playback from 19 Hz to 26 KHz. With powerful RMS values and a compact design, it provides an efficient solution for demanding audio configurations, ensuring you can utilize the full power of your sound system. The Stetsom HL 2000.4–1OHM is a 4-Channel Amplifier full-range amplifier, optimized for use with 1 Ohm. This is how the 4 amplifier series from Stetsom differ:  The Stetsom HL amplifiers are extremely powerful full-range amplifiers, optimized for use with mid and high frequencies. The Stetsom DB series includes amplifiers that are exclusively designed for the bass range.  The Stetsom EX line is a full-range amplifier series and can be used for both bass and front systems up to high frequencies.  The Stetsom Vulcan amplifier series is suitable for the bass range up to the mid-range!  Features: The HL1200.4 and HL2000.4 have 4 channels, divided into a front (FRONT) and a rear (REAR) channel, with independent Level: Adjusts the level of the input signal Crossover: Allows the choice between low-pass, high-pass, or flat (full-range) performance. DIGITAL amplifier and full-range playback from 19 Hz to 26 KHz. Specifications: 4-Channel Amplifier, optimized for connecting speakers with a total of 1 or 2 Ohm. RMS power at 1 Ohm 12.6V: 4 x 500W RMS (STEREO) RMS power at 2 Ohm 12.6V: 4 x 290W RMS (STEREO) RMS power at 1 Ohm 13.8V: 4 x 580W RMS (STEREO) RMS power at 2 Ohm 13.8V: 4 x 364W RMS (STEREO) Power @ 12.6V Bridge 1 Ohm: 2 x 1000W RMS Power @ 13.8V Bridge 1 Ohm: 2 x 1160W RMS Supply voltage: 9 ~ 15V Frequency range: 19Hz ~ 26KHz Low-pass filter: 90 Hz High-pass Crossover: 90 Hz Signal-to-noise ratio: > 90 dB Harmonic distortion: > 0.4% Input sensitivity: 0.2V Input impedance: 15K OHMS Minimum output impedance: 1 OHMS (STEREO) / 2 OHMS (BRIDGE) Consumption of music signals: 96A Consumption with bass signal: 192A Dimensions (H x W x D) mm: 66 x 206 x 241 mm Weight Kg: 2.23 kg

The Bravo Full 1.2K from Stetsom is a 1-Channel Amplifier that impresses with an RMS power of up to 1,600W at 1 Ohm and 14.4V. It offers a supply voltage of 9V to 15V DC and covers a frequency response of 10Hz to 15KHz. With a signal-to-noise ratio of over 90dB, it ensures clear sound experiences. The input sensitivity is 200mV, while the input impedance is 12K Ohm. The amplifier is also characterized by a compact design with dimensions of 80 x 231.5 x 147 mm and a weight of 1.65 kg. Features 1-Channel Amplifier RMS power 1,200W RMS power at 1 Ohm 12.6V 1,240W RMS power at 2 Ohm 12.6 V 700 W RMS power at 1 Ohm 14.4V 1,600W RMS power at 2 Ohm 14.4V 900W Supply voltage 9V ~15V DC Frequency response 10Hz ~ 15KHz Crossover low pass 90Hz ~ 15KHz Crossover high pass 10Hz ~ 90Hz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 12K Ohm Impedance output 2 Ohm Current consumption with signal music 60A Current consumption with signal bass 120A Dimensions (H x W x D) mm 80 x 231.5 x 147 mm Weight kg 1.65 kg

The Bravo Full 12K from Stetsom is a powerful 1-Channel Amplifier designed specifically for demanding audio applications. With its Class D Mono Amplifier, it offers a maximum RMS power of up to 13,140 W and covers a frequency range of 5 Hz to 7 kHz. With a signal-to-noise ratio of over 90 dB and adjustable filters for high-pass and low-pass, the amplifier ensures excellent sound quality. It operates within a voltage range of 9 V to 16 V DC and provides flexible adjustment options for different requirements. Thanks to its compact design with a width of 23.2 cm and a length of 57.4 cm, it is versatile in use. Power & Performance: Type: Class D Mono Amplifier. Channels: 1. Maximum RMS Power: Up to 13,140 W RMS (depending on version and voltage). Frequency Range: 5 Hz – 7 kHz. Signal-to-Noise Ratio: > 90 dB. Power Data by Version: 1 Ohm Version: Power at 14.4 V: 12,800 W RMS @ 1 Ohm / 8,510 W RMS @ 2 Ohm. Power at 12.6 V: 12,000 W RMS @ 1 Ohm / 7,120 W RMS @ 2 Ohm. 2 Ohm Version: Power at 14.4 V: 13,140 W RMS @ 2 Ohm / 7,115 W RMS @ 4 Ohm. Power at 12.6 V: 12,200 W RMS @ 2 Ohm / 6,770 W RMS @ 4 Ohm. Filters & Audio Settings: High-Pass Filter (HPF): 5 Hz – 90 Hz. Low-Pass Filter (LPF): 90 Hz – 7 kHz. Input Sensitivity: 200 mV. Input Impedance: 19 kOhm. Power Supply & Consumption: Operating Voltage: 9 V – 16 V DC. Current Draw (Music Signal): 590 A. Current Draw (Bass Signal): 1180 A. Recommended Fuse: 700 A. Connection Cross Sections: Power & Ground Connections: 50 mm². Speaker Connections: 16 mm². Dimensions & Weight: Width: 23.2 cm. Length: 57.4 cm. Height: 8.0 cm. Weight: approx. 8.6 kg.

The PA2500.2 from Stetsom is a 2-Channel Amplifier specifically designed for the demands of the car audio profile. With two pre-set channels for bass and midrange emphasis, as well as a FLAT mode, this amplifier offers flexible sound tuning. The output power in stereo operation reaches an impressive 1375 W RMS at 1 Ohm voltage and 1600 W RMS at 14.4 V voltage. The high input sensitivity and a signal-to-noise ratio of over 90 dB ensure clear and powerful sound experiences. Another advantage is the compact design with dimensions of 246.5 mm width, 324.5 mm length, and a weight of 5.4 kg, making it easier to install in various vehicle types. Highlights & Sound Profiles: Regional Tuning: Specifically developed for the demanding car audio profile of the Brazilian Northeast region and flexibly adapted to other regions. Pre-Equalized Channels: Offers two pre-set channels (Bass EQ and Mid EQ), which feature an internal 3-band equalizer with precise frequency points and levels to prominently highlight mids and bass. FLAT Mode: A linear FLAT Channel provides completely uncolored and balanced signal amplification. Power & Performance: Channels: 2 channels. Output Power at 12.6 V: Stereo: 2 x 1375 W RMS @ 1 Ohm Stereo: 2 x 940 W RMS @ 2 Ohm Bridged: 1 x 2650 W RMS @ 2 Ohm Output Power at 14.4 V: Stereo: 2 x 1600 W RMS @ 1 Ohm Stereo: 2 x 1200 W RMS @ 2 Ohm Frequency Range: 10 Hz – 11 kHz. Signal-to-Noise Ratio (S/N): > 90 dB. Total Harmonic Distortion (THD+N): ≤ 1 %. Audio Inputs & Impedance: Input Sensitivity: 450 mV – 8 V. Input Impedance: 15 kOhm. Output Impedance: Stereo: 1 Ohm / Bridged: 2 Ohm. Power Supply & Consumption: Operating Voltage: 9 V – 15.5 V DC. Current Draw (Music Signal): 150 A (@ 12.6 V). Current Draw (Bass Signal): 300 A (@ 12.6 V). Dimensions & Weight: Width: 246.5 mm Length: 324.5 mm Height: 77.5 mm Weight: 5.4 kg

The Bravo Bass 5k from Stetsom is a 1-Channel Amplifier that impresses with its exceptional performance and versatility. With an RMS power of 5200W at 1 Ohm and a frequency response of 5Hz to 600Hz, it delivers impressive audio quality. The amplifier excels with efficient power management and precise Crossovers, making it ideal for bass lovers. Despite its power, the Bravo Bass 5k is compact and lightweight, weighing only 4.31 kg. The detailed connection options allow for easy installation and use. Technical Specifications 1-Channel Bass Amplifier Power connections: 2x50mm² Plus and 2x50mm² Minus Speaker connections: 2x10mm² Number of channels 1 RMS power at 1 Ohm 5200 W RMS power at 2 Ohm 2900 W Supply voltage 9V ~17V DC Frequency response 5Hz ~ 600Hz (Flat ON) Crossover Low-pass 30Hz ~ 250Hz Crossover High-pass 5Hz ~ 40Hz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 4.8K Ohm Output impedance 1 Ohm Current consumption with signal music 228A Consumption with signal bass 456A Dimensions (H x W x D) mm 80 x 231.5 x 333 mm Weight kg 4.31 kg

The Bravo Full 12K from Stetsom is a powerful 1-Channel Amplifier designed specifically for demanding audio applications. With its Class D Mono Amplifier, it offers a maximum RMS power of up to 13,140 W and covers a frequency range of 5 Hz to 7 kHz. With a signal-to-noise ratio of over 90 dB and adjustable filters for high-pass and low-pass, the amplifier ensures excellent sound quality. It operates within a voltage range of 9 V to 16 V DC and provides flexible adjustment options for different requirements. Thanks to its compact design with a width of 23.2 cm and a length of 57.4 cm, it is versatile in use. Power & Performance: Type: Class D Mono Amplifier. Channels: 1. Maximum RMS Power: Up to 13,140 W RMS (depending on version and voltage). Frequency Range: 5 Hz – 7 kHz. Signal-to-Noise Ratio: > 90 dB. Power Data by Version: 1 Ohm Version: Power at 14.4 V: 12,800 W RMS @ 1 Ohm / 8,510 W RMS @ 2 Ohm. Power at 12.6 V: 12,000 W RMS @ 1 Ohm / 7,120 W RMS @ 2 Ohm. 2 Ohm Version: Power at 14.4 V: 13,140 W RMS @ 2 Ohm / 7,115 W RMS @ 4 Ohm. Power at 12.6 V: 12,200 W RMS @ 2 Ohm / 6,770 W RMS @ 4 Ohm. Filters & Audio Settings: High-Pass Filter (HPF): 5 Hz – 90 Hz. Low-Pass Filter (LPF): 90 Hz – 7 kHz. Input Sensitivity: 200 mV. Input Impedance: 19 kOhm. Power Supply & Consumption: Operating Voltage: 9 V – 16 V DC. Current Draw (Music Signal): 590 A. Current Draw (Bass Signal): 1180 A. Recommended Fuse: 700 A. Connection Cross Sections: Power & Ground Connections: 50 mm². Speaker Connections: 16 mm². Dimensions & Weight: Width: 23.2 cm. Length: 57.4 cm. Height: 8.0 cm. Weight: approx. 8.6 kg.

The HL2000.4 from Stetsom is a 4-channel amplifier designed for those seeking high power and sound fidelity in a car amplifier. With a power output of 2000W RMS, it offers independent front and rear channels as well as individually adjustable input signal levels. Additionally, you can switch between the operating modes LOW-PASS, HIGH-PASS, or FLAT thanks to the crossover. The HL2000.4 impresses with its unique versatility in installation and its full-range frequency from 20 Hz to 16 KHz. Available in both 1Ohm and 2Ohm variants, Stetsom takes performance and sound quality to a new level. Technical Data  Supply voltage 9.5 ~ 15 V Frequency response 10Hz ~ 26KHz Low-pass filter 90Hz High-pass crossover 90Hz Signal-to-noise ratio > 90 dB Harmonic Distortion <0.9% THD Input sensitivity 0.2V Input impedance 14K OHMS Minimum output impedance 1 OHM Power consumption with musical signal 57A Consumption with bass signal 114A Dimensions (A x H x H) mm 66 x 206 x 216 mm Weight kg 1.94 kg 1Ohm Variant RMS power on 1 Ohm 12.6 V 4 x 500 W RMS  2 Ohm RMS power 12.6 V 4 x 290 W RMS  RMS power on 1 Ohm 13.8 V 4 x 580 W RMS  2 Ohm RMS power 13.8 V 4 x 364 W RMS  2 Ohm Variant RMS power at 2 Ohm 12.6 V 4 x 500 W RMS (STEREO) 4 Ohm RMS power 12.6 V 4 x 290 W RMS (STEREO) RMS power at 2 Ohm 13.8 V 4 x 580 W RMS (STEREO) 4 Ohm RMS power 13.8 V 4 x 364 W RMS (STEREO) Power @ 12.6 V Bridge 4 Ohm 2 x 1000 W RMS Power @ 13.8 V Bridge 4 Ohm 2 x 1160 W RMS So the 4 amplifier series from Stetsom differ. The Stetsom HL amplifiers are extremely powerful full-range amplifiers, optimized for use with mids and highs. The Stetsom DB series includes amplifiers that are exclusively designed for the bass range.  The Stetsom EX line is a full-range amplifier series and can be used for both bass and front systems up to high frequencies.  The Stetsom Vulcan Amplifier Series is suitable for the bass range up to the midrange!   

The Bravo Full 1.2K from Stetsom is a 1-Channel Amplifier that impresses with an RMS power of up to 1,600W at 1 Ohm and 14.4V. It offers a supply voltage of 9V to 15V DC and covers a frequency response of 10Hz to 15KHz. With a signal-to-noise ratio of over 90dB, it ensures clear sound experiences. The input sensitivity is 200mV, while the input impedance is 12K Ohm. The amplifier is also characterized by a compact design with dimensions of 80 x 231.5 x 147 mm and a weight of 1.65 kg. Features 1-Channel Amplifier RMS power 1,200W RMS power at 1 Ohm 12.6V 1,240W RMS power at 2 Ohm 12.6 V 700 W RMS power at 1 Ohm 14.4V 1,600W RMS power at 2 Ohm 14.4V 900W Supply voltage 9V ~15V DC Frequency response 10Hz ~ 15KHz Crossover low pass 90Hz ~ 15KHz Crossover high pass 10Hz ~ 90Hz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 12K Ohm Impedance output 2 Ohm Current consumption with signal music 60A Current consumption with signal bass 120A Dimensions (H x W x D) mm 80 x 231.5 x 147 mm Weight kg 1.65 kg

The HL2000.4 from Stetsom is a 4-channel amplifier designed for those seeking high power and sound fidelity in a car amplifier. With a power output of 2000W RMS, it offers independent front and rear channels as well as individually adjustable input signal levels. Additionally, you can switch between the operating modes LOW-PASS, HIGH-PASS, or FLAT thanks to the crossover. The HL2000.4 impresses with its unique versatility in installation and its full-range frequency from 20 Hz to 16 KHz. Available in both 1Ohm and 2Ohm variants, Stetsom takes performance and sound quality to a new level. Technical Data  Supply voltage 9.5 ~ 15 V Frequency response 10Hz ~ 26KHz Low-pass filter 90Hz High-pass crossover 90Hz Signal-to-noise ratio > 90 dB Harmonic Distortion <0.9% THD Input sensitivity 0.2V Input impedance 14K OHMS Minimum output impedance 1 OHM Power consumption with musical signal 57A Consumption with bass signal 114A Dimensions (A x H x H) mm 66 x 206 x 216 mm Weight kg 1.94 kg 1Ohm Variant RMS power on 1 Ohm 12.6 V 4 x 500 W RMS  2 Ohm RMS power 12.6 V 4 x 290 W RMS  RMS power on 1 Ohm 13.8 V 4 x 580 W RMS  2 Ohm RMS power 13.8 V 4 x 364 W RMS  2 Ohm Variant RMS power at 2 Ohm 12.6 V 4 x 500 W RMS (STEREO) 4 Ohm RMS power 12.6 V 4 x 290 W RMS (STEREO) RMS power at 2 Ohm 13.8 V 4 x 580 W RMS (STEREO) 4 Ohm RMS power 13.8 V 4 x 364 W RMS (STEREO) Power @ 12.6 V Bridge 4 Ohm 2 x 1000 W RMS Power @ 13.8 V Bridge 4 Ohm 2 x 1160 W RMS So the 4 amplifier series from Stetsom differ. The Stetsom HL amplifiers are extremely powerful full-range amplifiers, optimized for use with mids and highs. The Stetsom DB series includes amplifiers that are exclusively designed for the bass range.  The Stetsom EX line is a full-range amplifier series and can be used for both bass and front systems up to high frequencies.  The Stetsom Vulcan Amplifier Series is suitable for the bass range up to the midrange!   

The Bravo Bass 3k from Stetsom is a 1-Channel Amplifier that stands out in the BRAVO line for its impressive performance and excellent sound. It is particularly suitable for bass and sub-bass applications, thanks to an innovative circuit board design and high-quality components. With an RMS power of up to 3000 W at 1 Ohm and a wide frequency response of 8 Hz to 600 Hz, it is ideal for Subwoofers and woofers. The compact dimensions and a weight of 2.9 kg allow for flexible installation in various audio setups. Specifications 1-Channel Bass Amplifier Power connections: 2x50mm² Speaker connections: 2x10mm² Number of channels: 1 RMS power at 1 Ohm: 3000 W RMS power at 2 Ohm: 1800 W Supply voltage: 9V ~17V DC Frequency response: 8Hz ~ 600Hz (Flat ON) Crossover low pass: 30Hz ~ 250Hz Crossover high pass: 8Hz ~ 40Hz Signal-to-noise ratio: >90dB Input sensitivity: 200mV Input impedance: 5K Ohm Output impedance: 1 Ohm Current consumption with music signal: 132A Consumption with bass signal: 265A Dimensions (H x W x D) mm: 80 x 231.5 x 236 Weight: 2.9 kg

The Bravo Full 5000 from Stetsom is a powerful 1-Channel Amplifier that impresses with a remarkable power of 5000W RMS. It is characterized by its versatility, delivering maximum power over a frequency range of 10Hz to 12kHz. This makes it ideal for both speaker systems and Subwoofers. Additionally, you can choose from various versions to customize the amplifier to your individual needs. Technical specifications  1 Ohm variant Number of channels 1 RMS power 5000W RMS RMS power at 1 Ohm 12.6 V 5000 W RMS RMS power at 2 Ohm 12.6 V 2800 W RMS RMS power at 1 Ohm 14.4 V 5300 W RMS RMS power at 2 Ohm 14.4V 3300W RMS Frequency response 10Hz ~ 12KHz Crossover Low-pass 90Hz ~ 12KHz Crossover High-pass 10Hz ~ 90Hz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 12K Ohm Impedance Output 1 OHM Power consumption with Music signal 242A Power consumption with Bass signal 485A Dimensions (H x W x D) 80 x 231.5 x 333 mm Weight 4.25 kg 2 Ohm variant Number of channels 1 RMS power 5000W RMS RMS power at 2 Ohm 12.6 V 5000 W RMS RMS power at 4 Ohm 12.6 V 2600 W RMS RMS power at 1 Ohm 14.4 V 5300 W RMS RMS power at 2 Ohm 14.4V 3000W RMS Supply voltage 9V ~ 16V DC Frequency response 10Hz ~ 12KHz Crossover Low-pass 90Hz ~ 12KHz Crossover High-pass 10Hz ~ 90Hz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 12KOhms Impedance Output 2 Ohm Power consumption with Music signal 227A Power consumption with Bass signal 445A Dimensions (H x W x D) 80 x 231.5 x 333 mm Weight 4.25 kg

Discover the Bravo Full 8000, a 1-Channel Amplifier from Stetsom. With an impressive RMS power of 8000W, this amplifier delivers excellent audio quality. Its flexible supply voltage of 9V to 16V DC and the wide frequency range of 10Hz to 12KHz are additional remarkable features that set it apart. Designed to give your music clarity and depth, the Bravo Full 8000 offers intense sound experiences. With a signal-to-noise ratio of over 90dB and an input sensitivity of 200mV, this amplifier elevates your listening experience to a new level. Technical specifications  1 Ohm variant Number of channels 1 RMS power 8000W RMS RMS power at 1 Ohm 12.6 V 8000 W RMS RMS power at 2 Ohm 12.6 V 4400 W RMS RMS power at 1 Ohm 14.4 V 8600 W RMS RMS power at 2 Ohm 14.4V 5100W RMS Supply voltage 9V ~ 16V DC Frequency response 10Hz ~ 12KHz Crossover low pass 90Hz ~ 12KHz Crossover high pass 10Hz ~ 90KHz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 14K Ohm Impedance output 1 Ohm Power consumption with music signal 370A Power consumption with bass signal 740A Dimensions (H x W x D) mm 80 x 231.5 x 429 mm Weight 6.0 kg 2 Ohm variant Number of channels 1 RMS power 8000W RMS RMS power at 2 Ohm 12.6 V 8000 W RMS RMS power at 4 Ohm 12.6 V 4200 W RMS RMS power at 2 Ohm 14.4 V 8700 W RMS RMS power at 4 Ohm 14.4V 4400W RMS Supply voltage 9V ~ 16V DC Frequency response 10Hz ~ 12KHz Crossover low pass 90Hz ~ 12KHz Crossover high pass 10Hz ~ 90Hz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 13K Ohm Impedance output 2 Ohm Power consumption with music signal 360A Power consumption with bass signal 720A Dimensions (H x W x D) mm 80 x 231.5 x 419 mm Weight 6.0 kg

Discover the Bravo Full 3000 from Stetsom, a 1-Channel Amplifier that features an impressive 3000 Watts RMS power. This amplifier is part of the BRAVO FULL line and is ideally suited for applications that require full power across the entire frequency range from 10Hz to 22kHz. Whether you want to drive speaker systems or Subwoofers, the Bravo Full 3000 offers versatile applications. With a supply voltage range of 9V to 16V DC and various adjustments for 1 and 2 Ohm, it flexibly adapts to your needs. Technical specifications   1 Ohm variant Number of channels 1 RMS power 3000W RMS RMS power at 1 Ohm 12.6 V 3100 W RMS RMS power at 2 Ohm 12.6 V 2000 W RMS RMS power at 1 Ohm 14.4 V 3500 W RMS RMS power at 2 Ohm 14.4V 2100W RMS Supply voltage 9V ~ 16V DC Frequency response 10Hz ~ 22KHz Crossover Low-pass 90Hz ~ 22KHz Crossover High-pass 10Hz ~ 90Hz Input sensitivity 200mV Input impedance 18K Ohm Impedance Output 1 Ohm Power consumption with Musical signal 160A Power consumption with Bass signal 320A Dimensions (H x W x D) 80 x 231.5 x 236 mm Weight 2.90 kg 2 Ohm variant Number of channels 1 RMS power 3000W RMS RMS power at 2 Ohm 12.6 V 3000 W RMS RMS power at 4 Ohm 12.6 V 1700 W RMS RMS power at 2 Ohm 14.4 V 3900 W RMS RMS power at 4 Ohm 14.4V 2200W RMS Supply voltage 9V ~ 16V DC Frequency response 10Hz ~ 22KHz Crossover Low-pass 90Hz ~ 22KHz Crossover High-pass 10Hz ~ 90Hz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 12K Ohm Impedance Output 2 Ohm Power consumption with Musical signal 150A Power consumption with Bass signal 300A Dimensions (H x W x D) 80 x 231.5 x 236 mm Weight 2.90 kg

The Bravo Full 5000 from Stetsom is a powerful 1-Channel Amplifier that impresses with a remarkable power of 5000W RMS. It is characterized by its versatility, delivering maximum power over a frequency range of 10Hz to 12kHz. This makes it ideal for both speaker systems and Subwoofers. Additionally, you can choose from various versions to customize the amplifier to your individual needs. Technical specifications  1 Ohm variant Number of channels 1 RMS power 5000W RMS RMS power at 1 Ohm 12.6 V 5000 W RMS RMS power at 2 Ohm 12.6 V 2800 W RMS RMS power at 1 Ohm 14.4 V 5300 W RMS RMS power at 2 Ohm 14.4V 3300W RMS Frequency response 10Hz ~ 12KHz Crossover Low-pass 90Hz ~ 12KHz Crossover High-pass 10Hz ~ 90Hz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 12K Ohm Impedance Output 1 OHM Power consumption with Music signal 242A Power consumption with Bass signal 485A Dimensions (H x W x D) 80 x 231.5 x 333 mm Weight 4.25 kg 2 Ohm variant Number of channels 1 RMS power 5000W RMS RMS power at 2 Ohm 12.6 V 5000 W RMS RMS power at 4 Ohm 12.6 V 2600 W RMS RMS power at 1 Ohm 14.4 V 5300 W RMS RMS power at 2 Ohm 14.4V 3000W RMS Supply voltage 9V ~ 16V DC Frequency response 10Hz ~ 12KHz Crossover Low-pass 90Hz ~ 12KHz Crossover High-pass 10Hz ~ 90Hz Signal-to-noise ratio >90dB Input sensitivity 200mV Input impedance 12KOhms Impedance Output 2 Ohm Power consumption with Music signal 227A Power consumption with Bass signal 445A Dimensions (H x W x D) 80 x 231.5 x 333 mm Weight 4.25 kg